3D Printer Filament PLA Brown Color 1.75mm/3mm


3D Printer Filament PLA is a biodegradable plastics polylactic. It is mainly made of corn starch as raw materials. It has the advantages of environmental protection, non-toxic, harmless, biodegradable, small shrinkage, Good thermal stability, good toughness, high strength, shiny surface and etc. It is the best-selling 3D printer material on the market at present.

Out of stock

3D Printer Filament PLA Brown Color 1.75mm/3mm

PLA is a kind of bio-material from corn grains, and it is very environmental. For its natural biodegradable and it doesn’t have any pungent odor when it is processing. PLA’s material is tough, it has good gloss, it has higher transparency with strong assault resistance, therefore its printing products are shiny, clean and beautiful.

3D Printer Filament PLA has the advantages of environmental protection, non-toxic, harmless, biodegradable, small shrinkage, good thermal stability, good toughness, high strength, shiny surface and many other benefits. It is the best-selling 3D Printer material on the market at present.

  1. Small shrinkage, good thermal stability. It can print the samples of complex structure and large items no cracking, low distortion.
  2. Good toughness, high strength. Except the ordinary objects, it suitable for printing assembling structure at the same time. When the strength of the structure is high. The print filling rate should be above 30%.


  • Recommended Extrusion Temperatures: 200°C-240°C
  • Spool Dimensions (Approx): 200mm Total Diameter x 56mm Inner Hole Diameter x 70mm Height
  • Dimensional Accuracy: ±0.1mm
  • Density: 1.25 g/cm³
  • Modeling Shrinkage: 0.3%
  • Length (Approx): 330 m

All filament comes sealed in a bag with desiccant. We recommend keeping it stored that way until you are ready to use it. Spools not in use should be kept in an airtight container.

Tips and Tricks for Printing in PLA

Get the first layer right! Most prints succeed or fail based on the first layer. Be sure to level the print bed and to home the printer. Then print onto Kapton tape to help make sure your print sticks to the bed throughout the whole print. An alternative to printing on Kapton tape is to print with a heated bed and print straight onto glass. Heat the bed to 50°C-70°C.

If your first layer fails to stick to the bed then be sure you have a level bed, make sure the print head is close enough to the bed, and make sure you have run the extruder before beginning the print.

Temperature is King – Each time you try a new filament realize that you may need to experiment with the ideal print temperature for your machine. Each machine is a little different so start with our suggested range (200°C-240°C) and move up or down in 5 degree increments until your prints look perfect. If you are printing too hot, your print will look stringy or your extruder will look like it is leaking filament.

If you are printing too cold you will notice that your filament is having trouble adhering to each layer and the surface will look very ruff.

*3D printers have lots of different types of hot-end which makes it extremely difficult to give aan temperature advice. We feel our temperature advice holds for most 3d printers, but should be considered as a starting point for you to find the temperatures that work in you setup. Don’t be afraid to go either higher or lower than our advised temperatures if you feel your setup needs this.


– 1kg /spool, 8 Spools/ctn.

In-house testing:

We tested a wide range of popular 3D Printers. We’re continuously testing on our 3D Printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community.

Our 3D printing filaments can be printed in most of the FFF(FDM) 3d Printers, such as Makerbot, Zortrax, Ultimaker, Flashforge, Wanhao, Reprap, Prusa i3 and more.

Additional information

Weight 3.3 lbs
Dimensions 8.7 × 8.7 × 3.9 in


There are no reviews yet.

Be the first to review “3D Printer Filament PLA Brown Color 1.75mm/3mm”

Product Manuals

If applicable, the Product Documentation, Reference Materials, CAD design(s),.STEP file(s) and/or other drawing files, Manuals, and Tutorials will be available for download upon purchase. The order confirmation email will include a downloadable link to the product file(s), which can also be downloaded from the My Account section if needed.

Beaver3d was founded by a 3d printing alliance who have faith in the future of 3D printing industry. Headquarter is in Taiwan, factory located in Shenzhen, and alliance members are in Mainland and Taiwan, China. We love and enjoy 3D printing, and using it to create many objects. We deeply believed it’s the makers’ age, it’s the age that everybody has the opportunity to create, make, and to sell by their own. Our goal is simple, we want to supply our customers with the highest quality filament possible with our 3d printer and 3d pen.  Our company’s integrity, strength and quality of the industry and recognized by the customers at home and abroad, the products are exported to Europe, America, Asia.

Shipping Policy

We primarily ship via FedEx, UPS, DHL, and USPS because they are reliable, fast, and easily trackable. We usually ship within two to three business days after the full payment is received. Standard Delivery generally occurs within 5 to 7 business days after the ship date. However, sometimes delivery time depends on destination, logistics mode, weather conditions, size, and product weight.

SHIPPING COSTS: For some industrial products, e.g., wheels, and CNC machines, etc. the shipping cost is calculated based on the product weight, not quantity. To benefit from lower shipping costs for orders with multiple items, please contact us at Our shipping rates are listed very clearly on each product page under the SHIPPING tab. Additionally, to see the shipping cost for your country, add the item to the Shopping Cart, there you will see the shipping cost based on your Country and Location.

ORDER CANCELLATION POLICY: By placing your order, you signify that you agree to be bound by our Order Cancellation Policy.

REFUND AND REPLACEMENT POLICY: For more info on Refund and Replacement Policy please visit Refund and Replacement Policy.

DUTY TAX, CUSTOMS, IMPORT FEES AND TARIFFS: While not all products require customs fees, but some industrial items may require a minimal tariff if applicable in your country. The total amount for your order does not include a customs fee. A minimal tariff belongs to the buyer when applicable. Oz Robotics is not responsible for tariffs for any shipment. Please check the “By” section on each product page to see the manufacturer or supplier for that product. Please read our Policies:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Return Policy

EXCHANGE POLICY: Oz Robotics wants you to be happy with your new purchase. However, we abide by the exchange policy of our suppliers because we do not manufacture these products; our suppliers do. Please read the product exchange policy defined by each supplier for their own listed product(s), which can be found under the Shipping tab on each product page. Once you have used the product, our supplier(s) and we have the right not to issue a refund. Still, they will offer an exchange for the wrongly purchased items or products with serious and irreversible defects or technical problems (s). If wrongly purchased products or any other similar issues, the buyer will pay the shipping fee. If the product you purchased is defective, please email us at with some photos or a video of the defective parts to evaluate before you send it. Click HERE for more on Refund and Replacement Policy

REFUNDS/RETURNS: Oz Robotics accepts returns on a minimal basis unless there is a manufacturing defect. For any electronic items, returns are only accepted on devices with serious and irreversible problems; meanwhile, the customer must apply for the returns within 7 days from the delivery date. Before a refund acceptance, please include images or a video and any other material proof of the defect. However, we abide by the exchange policy of our suppliers because we do not manufacture these products; our suppliers do.

Other than our supplier’s default policy, once a return is agreed upon, then you can ship your defective item to the provided return address that you should receive from us first. Please ship the order in original packaging with all the accessories and additional parts. If the Required Parts are not sent back, they will be billed for or expected to be shipped at a later stage. And only once all items have arrived as a full system can we check the returned product for testing. Include in your package a signed letter stating the reason for your return and the original receipt as well as any mentioned proof of defect, images, or a video, etc. This will help us to speed up the process on your behalf.

The purchaser (customer/buyer) is responsible for all shipping costs when returning an item. However, upon receiving the returned order, we will assess the product. If it is determined that there is, in fact, a manufacturing defect, then we will refund the shipping costs as well as repair or replace or refund the full amount to the purchaser if the product is not fixable.

If you wish to return an unused product, please do so within 7 days from the ship date for a refund on the purchase price, minus shipping, handling. Refunds will be credited to the original credit card use for payment in 24-48 HOURS after receiving the product back. We will charge 50% restocking fee.

Once your return is received and inspected, and if agreed for a refund, refunds will be credited to the original credit card used for payment in 24-48 hours. Please note that we will charge a 50% restocking fee if you want to return a product without any defect.

Once your refund is processed, then PayPal will return the money to the card that was used. It may take at least 5 business days (depending on the bank and credit company) before your refund is officially posted in your bank account and statements. Contact Us if you still have not received your refund after 5 business days.

Do not return your product to our New York office. For any exchange or refunds, please email us first at for us to provide you with the steps that need to be followed. Any product you return must be in the same condition you received and returned in the original packaging without being used. Please keep the original receipt. More on Refund and Replacement Policy.

Shipping costs

Country State Postcode Cost
United States (US) Any Any $16.20
Any Any Any $17.80
Australia Any Any $17.20
Any Any Any $22.80
Any Any Any $18.00
Georgia Any Any $18.00
France Any Any $18.00
New Zealand Any Any $21.50
Peru Any Any $26.60
Chile Any Any $26.60
Brazil Any Any $23.00
Dominica Any Any $18.00
Switzerland Any Any $18.00
Sweden Any Any $18.00
Any Any Any $18.00
Singapore Any Any $14.80
Philippines Any Any $14.50
Malaysia Any Any $13.50
South Korea Any Any $14.20
Thailand Any Any $16.50
Japan Any Any $16.50

If you have any questions with regards to this product, please ask us here. This will include the product link automatically.

There are no questions yet. Be the first to ask a question about this product.

Send me a notification for each new answer.

Make Money!

Start Selling – Suppliers and Manufacturers, let us help you sell your Hardware, Software, Tech Books, and Services on  See Details

Affiliates – You’re already sharing so many things online without making any money; why not share our products and make money when your visitors buy. Join Now

Freelancers – Generate Revenue by Offering Your Freelance Skills on Contact Us