3D Printer Filament PLA Dark Green Color 1.75mm/3mm

$18.00 $14.99

3D Printer Filament PLA is a biodegradable plastics polylactic. It is mainly made of corn starch as raw materials. It has the advantages of environmental protection, non-toxic, harmless, biodegradable, small shrinkage, Good thermal stability, good toughness, high strength, shiny surface and etc. It is the best-selling 3D printer material on the market at present.

This product is currently out of stock.

3D Printer Filament PLA Dark Green Color 1.75mm/3mm

PLA is a kind of bio-material from corn grains, and it is very environmental. For its natural biodegradable and it doesn’t have any pungent odor when it is processing. PLA’s material is tough, it has good gloss, it has higher transparency with strong assault resistance, therefore its printing products are shiny, clean and beautiful.

3D Printer Filament PLA has the advantages of environmental protection, non-toxic, harmless, biodegradable, small shrinkage, good thermal stability, good toughness, high strength, shiny surface and many other benefits. It is the best-selling 3D Printer material on the market at present.

  1. Small shrinkage, good thermal stability. It can print the samples of complex structure and large items no cracking, low distortion.
  2. Good toughness, high strength. Except the ordinary objects, it suitable for printing assembling structure at the same time. When the strength of the structure is high. The print filling rate should be above 30%.


  • Recommended Extrusion Temperatures: 200°C-240°C
  • Spool Dimensions (Approx): 200mm Total Diameter x 56mm Inner Hole Diameter x 70mm Height
  • Dimensional Accuracy: ±0.1mm
  • Density: 1.25 g/cm³
  • Modeling Shrinkage: 0.3%
  • Length (Approx): 330 m

All filament comes sealed in a bag with desiccant. We recommend keeping it stored that way until you are ready to use it. Spools not in use should be kept in an airtight container.

Tips and Tricks for Printing in PLA

Get the first layer right! Most prints succeed or fail based on the first layer. Be sure to level the print bed and to home the printer. Then print onto Kapton tape to help make sure your print sticks to the bed throughout the whole print. An alternative to printing on Kapton tape is to print with a heated bed and print straight onto glass. Heat the bed to 50°C-70°C.

If your first layer fails to stick to the bed then be sure you have a level bed, make sure the print head is close enough to the bed, and make sure you have run the extruder before beginning the print.

Temperature is King – Each time you try a new filament realize that you may need to experiment with the ideal print temperature for your machine. Each machine is a little different so start with our suggested range (200°C-240°C) and move up or down in 5 degree increments until your prints look perfect. If you are printing too hot, your print will look stringy or your extruder will look like it is leaking filament.

If you are printing too cold you will notice that your filament is having trouble adhering to each layer and the surface will look very ruff.

*3D printers have lots of different types of hot-end which makes it extremely difficult to give aan temperature advice. We feel our temperature advice holds for most 3d printers, but should be considered as a starting point for you to find the temperatures that work in you setup. Don’t be afraid to go either higher or lower than our advised temperatures if you feel your setup needs this.


– 1kg /spool, 8 Spools/ctn.

In-house testing:

We tested a wide range of popular 3D Printers. We’re continuously testing on our 3D Printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community.

Our 3D printing filaments can be printed in most of the FFF(FDM) 3d Printers, such as Makerbot, Zortrax, Ultimaker, Flashforge, Wanhao, Reprap, Prusa i3 and more.


Weight 3.3 lbs
Dimensions 8.7 × 8.7 × 3.9 in


There are no reviews yet.

Be the first to review “3D Printer Filament PLA Dark Green Color 1.75mm/3mm”

Product Manuals

If applicable, the Product Documentation, Reference Materials, CAD design(s),.STEP file(s) and/or other drawing files, Manuals, and Tutorials will be available for download upon purchase. The order confirmation email will include a downloadable link to the product file(s) which can also be downloaded from the My Account section if needed.

Beaver3d was founded by a 3d printing alliance who have faith in the future of 3D printing industry. Headquarter is in Taiwan, factory located in Shenzhen, and alliance members are in Mainland and Taiwan, China. We love and enjoy 3D printing, and using it to create many objects. We deeply believed it’s the makers’ age, it’s the age that everybody has the opportunity to create, make, and to sell by their own. Our goal is simple, we want to supply our customers with the highest quality filament possible with our 3d printer and 3d pen.  Our company’s integrity, strength and quality of the industry and recognized by the customers at home and abroad, the products are exported to Europe, America, Asia.

Shipping Policy

For some products, the shipping cost is calculated based on the product weight, not based on the number of items in the order. To benefit from lower shipping costs for orders with multiple items, please contact us at Click HERE for more on Shipping, Exchange and Refund Policies.

By placing your order, you agree to Oz Robotics order cancellation policy

IMPORT TAX/CUSTOM FEE: While not all products require import/customs tax, but some items may require a very small duty/import tax if applicable in your country. The total amount for your order does not include any duty fees. All import duties must be paid by the buyer. Oz Robotics is not responsible for import fees, duties, or customs clearance for any shipment. On each product page; please check the “By” section to see the manufacturer or supplier for that product.

SHIPMENT: We strictly use UPS, DHL, or FedEx for all orders because they are reliable, faster, and easily trackable. We usually ship within two business days after the full payment is received. Standard Delivery generally occurs within 3-5 business days after the ship date. However, sometimes delivery time depends on destination, logistics mode, weather conditions, size, and weight of the product. Our shipping rates are listed very clearly on each product page under the SHIPPING tab. Additionally in order to see the shipping cost for your country, just add your item to the Shopping Cart, there you will see the Estimate Shipping button. Just click on that button to see the shipping cost based on your Country and Location. Click HERE for more on Shipping Policies.

Return Policy

EXCHANGE POLICY: Oz Robotics wants you to be happy with your new purchase. However, we abide by the exchange policy of our suppliers because we do not manufacture these products, our suppliers do. Please read the product exchange policy that is defined by each supplier for their own listed product(s) which can be found under the Shipping tab on each product page. Once you have used the product, we and our supplier(s) have the right to not issue a refund, but they will offer an exchange for the wrongly purchased items, or products that have serious and irreversible defects or technical problem(s). In the case of wrongly purchased products or any other similar issues, the shipping fee will be paid by the buyer. If the product you purchased is defective, please email us at with some photos or a video of the defective parts for us to evaluate before you send it. Click HERE for more on Exchange Policies.

REFUNDS/RETURNS: Oz Robotics accepts returns on a very limited basis, which unless there is a manufacturing defect. For any electronic items, returns are only accepted on devices which have serious and irreversible quality defect problem, meanwhile, the customer must apply for the returns within 7 days from the date of delivery. Before a refund acceptance please include images or a video, and any other material proof of the defect. However, we abide by the exchange policy of our suppliers because we do not manufacture these products, our suppliers do.

Please check our supplier Exchange Policy under the “Shipping” tab on each listed product page. Other than our supplier’s default policy, once a return is agreed upon, then you can ship your defective item to the provided return address that you should receive from us first. Please ship the order in original packaging with all the accessories and additional parts. If the Required Parts are not sent back, then it will be billed for, or expected to be shipped at a later stage. And only once all items have arrived as a full system, then we can check the returned product for testing. Include in your package a signed letter stating the reason for your return and the original receipt as well as any above mentioned proof of defect, images, or a video, etc. This will help us to speed up the process on your behalf.

The purchaser (customer/buyer) is responsible for all shipping costs when returning an item. However, upon receiving the returned order, we will assess the product, and if it is determined that there is in fact a manufacturing defect then we will refund the shipping costs as well as repair, or replace or refund the full amount to the purchaser if the product is not fixable.

If you wish to return a product, please do so within 7 days from the ship date for a refund on the purchase price, minus shipping, handling. Refunds will be credited to the original credit card use for payment in 24-48 HOURS after receiving the product back. We will charge 70% restocking fee.

Once your return is received and inspected, and if agreed for a refund, then refunds will be credited to the original credit card used for payment in 24-48 hours. Please note that we will charge a 20% restocking fee if you want to return a product that does not have any defect.

Once your refund is processed, then PayPal will return the money to the card that was used. It may take at least 5 business days (depending on the bank and credit company) before your refund is officially posted in your bank account and statements. Contact Us if you still have not received your refund after 5 business days.

Do not return your product to our New York office. For any exchange or refunds, please email us first at for us to provide you with the steps that need to be followed. Any product you return must be in the same condition you received it and must be returned in the original packaging without being used. Please keep the original receipt. Click HERE for more on Shipping, Exchange and Refund Policies.

Shipping costs

Country State Postcode Cost
United States (US) Any Any $16.20
Any Any Any $17.80
Australia Any Any $17.20
Any Any Any $18.00
France Any Any $18.00
New Zealand Any Any $21.50
Brazil Any Any $23.00
Dominica Any Any $18.00
Switzerland Any Any $18.00
Sweden Any Any $18.00
Any Any Any $18.00
Philippines Any Any $14.50
Malaysia Any Any $13.50
South Korea Any Any $14.20
Thailand Any Any $16.50
Japan Any Any $16.50

If you have any questions with regards to this product, please ask us here. The product link will be included automatically.

There are no questions yet. Be the first to ask a question about this product.

Send me a notification for each new answer.

You have not viewed any product yet.


Make Money As Our Affiliate Partner

You’re already sharing so many things on social media without making any money, why not share our products and make some money when your visitors buy. Details

Make Money As Our Supplier Partner

Let us help you sell your Hardware, Software, Books, and Virtual Services on  Start Selling