Bluetooth Low-Light Solar Development Kit (LES100)
Fully powered by PowerFilm’s Indoor Light Series solar, the Bluetooth Indoor Solar Development Kit features a wireless sensing module that collects data from a variety of sensors and sends it to a connected mobile device via Bluetooth Low Energy (BLE). Ideal for indoor environments, the LES100 uses a nano-power energy harvester to operate down to 200 lux and below. The integrated power management features battery charging with over/under voltage protection and a regulated output voltage rail.
This development kit is meant to be the first building block of any IoT sensing project or idea. The wireless MCU is broken out so additional sensors and components can be added easily. This open source design accelerates the development process by making solar power simple.
Wireless Sensing Unit
Pre-configured to measure light level, temperature, and battery level.
Adjustable data rate from .1 – 30 seconds.
CC2650 Ultra Low Power Simplelink Multi Standard Wireless MCU.
I/O pin breakout.
User friendly mobile application.
Supports Bluetooth Low Energy, ZigBee, 6LoWPAN and ZigBee RFCE.
Energy Harvesting Unit
BQ25570 Nano Power Boost Charger and Buck Converter.
Optimized for PowerFilm low light series solar panels.
Operational down to 200 lux and below.
Artificial light collection.
Battery charging with over/under voltage protection.
Adjustable output voltage from 2-5 volts.
Open source hardware and software.
There are many remote sensing applications. Depending on sensor power requirements, the Bluetooth Indoor Solar Development Kit (LES100) and PowerFilm solar panels will support the applications listed below:
Temperature / Humidity / Pressure / Light Level / Vibration / Motion
Acoustic / Air Flow / Water Flow / Strain / Moisture / Air Quality
Occupancy / Acceleration / Water Level
Home Automation / Wearables / Smart Buildings / Smart City
Smart Agriculture / Wireless Nodes / Asset Tracking
Smart Transportation / Gateways / Beacons
Equipment Monitoring / Industrial Automation
What’s In The Kit?
– LES100 PCBA
Panel with wires:
– (2) LL200-2.4-75
– Power: 200 lux: 0.29mW
– Operating Voltage: 200 lux: 1.60V
– Current: 200 lux: 0.18mA
– Model: DTP301120
– Nominal Voltage: 3.7V
– Typical Capacity: 40mAh
– Includes protection circuit
Absolute maximum open circuit voltage: 3.6V
Absolute maximum short circuit current: 100mA
*No international shipments for online purchases. United States only. For delivery to other locations, please contact us at email@example.com