English 10 Frequency RFID NFC Encrypted Copier Reader Writer Cloner+5pcs 13.56mhz UID Writable Keys+5pcs 125khz t5577 Keyfobs
Note:NOT support HID iCLASS ,Contact smart cards(4442 or 4428 chip),ISO15693 Cards.NOT support write 14 digits of UID number!NOT support write Credit cards!! NOT support write full encrypted Mi-fare cards!(cards’s main chip encrypted and each sector not the default passwords)
Support 10 kinds of Frequency:(support HID Prox cards)
After copy the cards by this copier,the cards cannot be copy by others copier again!
1.)HD3.2 inch full color screen, the display effect is clear
2.)ID/IC full hand, voice broadcast. (pronunciation skills in China)
3.)Support read write Frequency: 125KHz, 250KHz, 500KHz, 375KHz,625khz, 750kHz, 875KHz, 1000KHZ, 13.56MHz(ISO1443A/B),HID Prox cards.
4.) Support read:EM4100/EM4200,MF classic 1K,UID cards,Ultralight,Ntag203,HID 1386/1326/1346.
5.)Support cards write:HID 1386/1326/1346,T5577,EM4305,MF UID cards.
6.)Digital key input number can be directly input.
7.)4 AAA batteries supply, standard mobile phone, easy to carry. Also can use USB line power supply.
8.)Comes decoding, direct preparation of various types of smart card access door.
9.)It can crack the encryption card.
How to Crack encryption 13.56Mhz cards:
Please read it carefully and follow the steps as below:
When the 13.56mhz cards have encrypted,it should be using the software to crack the cards.Conneted with copier with computer via USB cable,then Press the “on/off” button,then the copier will be show the “Disclaimer”page,NOT press any button on the Copier,then your computer will show a removeable disk,open the disk,there are the manual and the software,Press the button “OK” to agree with the Disclaimer on the computer fistly,then argee with the copier’s “Disclaimer”page,that’s will be connect successfully,put your original cards on the back side of the Read/Write area,then press the button “scan”to crack the passwords,after 2 or 5 minutes,the passwords will be cracked successfully,then put one UID cards in the read/write area,then press”write“button,that’s will be ok.
How to copy the 125khz RFID cards:
Press the “on/off “button,put the original 125khz cards on the back of the copier,then the copier will be show the “Disclaimer”page,Press “ok” button,then put the cards on the back side of the copier,then press”scan”,then the copier will auto scan it is 125khz cards,and the copier will show the card number,then we put one writable EM4305 key on the back side of the copier,then press”Write”,then that will be write succesfully.