Hitec HS-422 Standard – Supermodified Servo
The HS-422 has been around for a while offering durability and the ability to be easily Supermodified. It can easily be modified for wheeled applications since the output shaft is supported on the bottom and top with BALL BEARINGS. are based on a version of HS422 Supersport servo and are modified for continuous rotation of the output shaft (by removing in our lab themechanical stop from the output servo gear) offering innovative PID position/speed control, rendering appropriate solutions for
most robotics applications. And don’t worry we offer you also a legacy PPM interface. Note that the Hitec HS-422 is modified to continuous rotation, coming to you with 2-year warranty.
Modified for continuous rotation (360 degrees) with 32768 ticks/rev!
Highly responsive & accurate for the price!
Continuous Rotation WITHOUT DEAD BAND and 4.1 kgcm torque (@6V)
Selection of communication bus: I2C, RS485 and Legacy PPM offered.
Absolute Position measurement (repeatability up to 20 ticks).
Dual Ball Bearings-Not oilite bushings!
64 bit position measurement.
HS-422 Super Sport Supermodified Specs
Control System: SMS V3.0
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.21sec/60° at no load
Operating Speed (6.0V): 0.16sec/60° at no load
Stall Torque (4.8V): 45.82 oz/in (3.3 kg/cm)
Stall Torque (6.0V): 56.93 oz/in (4.1 kg/cm)
Current Drain (4.8V): 4 mA/idle, 700mA under load
Current Drain (6.0V): 4 mA/idle, 800mA under load
Direction: Multi-directional (64 bit revolution counter)
Motor Type: 3 Pole Ferrite
Position Feedback: MagENC Low Rev
Bearing Type: Dual BALL BEARING
Gear Type: Nylon
Wire Lengths: 4inch (~100mm)
Weight: 1.6oz (45.5g)