Laser Machine and Laser Cutter – Nova 24
Though the size is small, its ability for cutting and engraving is also as good as the big machines. It is especially good for customers who need to make customized products.
1000mm speed for engraving photo, super smooth vector cutting quality
Control the exhaust fan,air assist, and alarm lamp automatically, energy saving
RDWorksV8 laser software.
Set speed, power, and more directly from the LCD panel
Help the user to set focus Easier. (based on motorized table)
Control the table up/down from LCD panel directly
Reduces underside reflections.
Low-noise cooling fan
Operate the laser in a quiet and comfortable surroundings.
Engrave high quality 3D photos directly.
Achieve “3D cutting” on some materials
Help you to save times.
Change the working speeds and power by using color settings.
Visible Red Dot Pointer
Make the laser beam “visible”.
High quality laser tube
Every laser tube must pass the strict quality control test.
High quality optics
It is engineered with High Quality Optics
Thunderlaser easily re-adjusting 3D mirror mounts.
High-speed Ethernet line or the USB cable line.
USB disk interface
Thunder laser system supports the USB disk loading.
Free Home position
Freely change the starting position.
Large buffer memory
You can take the file directly from the memory.
Turn off the machine immediately when there is an accident.
Open flap protection
Laser will stop working if you open the front cover.
Laser will stop working if the water cooling system is not working
Show the work state and tell when the job is done, more safe for you.
Standard laser head
It is the most often used head.
Blowing air to prevent the material being burned
Ensure the work pieces and laser cutter machine inside be clean.
This belt is stable performance with long life, wearable and durable.
High quality rails
Keep the engraving precise and very durable.
When the laser tube is working, it will produce a large amount of heat.Since the water chiller has the refrigerating capacity and can adjust the temperature intelligently to keep the temperature within a certain range, there by to ensure the stability of laser working.
Rotary engraving equipment was used to extending THUNDER LASER system application, as a optional component, It can be used for cutting and engraving round items.
Heat Alarm Detector
A thermal detector is designed for areas where a fire will be more flame and heat than smoke; areas such as laser cutter and engraver, kitchens, garages and workshops. The small thermal heat detector will also have a 10 year, long life battery.
HR laser head
We named High-Resolution head as HR head for short,it’s made by special structure for focusing the laser beam into a much smaller dot,thus we can get more tiny laser dots in a unit area,and the engraving result will be more elaborate.
4 Inch laser head
4 Inch laser head owns a longer focal distance than 2″ standard head, thus for cutting thick material, it makes the cutting edge more smooth and straight…
The high pressure and low noise air compressor offered by Thunder Laser co2 laser engraving machine includes two parts: the high pressure and low noise air compressor and the water separator…
Air-pressure control sensor
The Air-pressure control sensor made by Thunder Laser can measure the air pressure and indicate the air-pressure value in real time.it can set to measure even 0.01Mpa air pressure, it’s valid for both air pump and high pressure air compressor…
Laser System: NOVA 24
Laser Tube Wattage: 40-60Watt
Work Area: 600x400mm(23.6″ x 15.7″)
Max Part Size (WxLxH) Front door closed: 700x530x170mm(27.6″ x 20.9″ x6.7″)
Pass-through door: 700x∞x15mm(27.6″ x ∞” x 0.6″)
Table Size: 700x530mm(27.6″ x 20.9″)
Z Axis Height: 155mm(6.1″)
Dimensions(WxDxH): 1070x790x610mm(42.1″ x 31.1″ x24″)
- Net Weight: 130kgs (287lbs)
- Laser Type: Sealed Co2 Glass Laser Tube
- Cooling: Water Cooled
- Motion Control System: High-Speed Servo Motors
- Maximum Speed: 1000mm/S (39.4 IPS)
- Speed and Power Control (engraving depth): Computer or manually controlled speed and power from 0-100%. Vector color mapping sets speed and power settings using RGB color mapping.
- Operating Modes: Optimized raster, vector, and combined mode
- Resolution(DPI): User controlled from 100 to 500DPI (standard laser head), up to 1000 DPI(HR head)
- Computer Interface: Ethernet and USB Connection
- Compatible Operating Systems: Windows XP/2000/Vista/7/8/10
- Buffer Memory: 128MB Standard
- Display Panel: 3.5″ LCD panel showing current file, total working time, laser power, speed etc.
- Electrical Requirements: 110 to 240 volts, 50 or 60 Hz, single phase
- Ventilation System: Integral exhaust fan.There is 1 output port, 5.7″ (145 mm) in diameter in the rear of the case.