Splash Drone 4 Swellpro Waterproof Drone Night Fishing Bundle

$3,100.00

  • All-new waterproof flight & float platform.
  • Import duty & tax included for the United States.
  • Please check “in the box” to see what’s included in the box of SplashDrone 4.

See the difference between SplashDrone 4, SplashDrone 3+ & SwellPro Fisherman here.


Made In: China

Made By Swellpro SKU: Splash Drone 4 Swellpro Categories: , Tags: , More From:

Splash Drone 4 Swellpro Waterproof Drone Night Fishing Bundle

Splash drone 4 fishing bundle included:

  • Splash Drone 4
  • Gc2 Camera
  • Payload Bait Release
  • Total Of 3 Flight Batteries
  • Remote Control
  • Battery Charger
  • 6 Propellers (3 Pairs)
  • Landing Gear
  • Foam Carrying Case

Small accessories bag (cables instructions, micro USB cable, screwdriver, waterproof membrane).

The multi-functional waterproof flight platform

Swellpro Splash Drone 4 Sale

SplashDrone 4 is the 5th generation waterproof drone representing SwellPro’s 7 years of knowledge and understanding of drone waterproofing technology. SplashDrone 4 is the all-new waterproof flight & float platform designed for multipurpose operation in any harsh environment.

A New Benchmark for Waterproof Drones

Splash Drone 4 features

Swellpro Splash Drone 4 waterproof Boat

All-new IP67 seawater-proof body

SplashDrone 4 is designed to have the best waterproofing technology in the industry. The tough, rigid fuselage is made out of industrial-grade ABS. Each SplashDrone 4 is factory-sealed to the slightest details, and air-pressure tested for our exclusive 100% waterproof guarantee. The waterproof motors and internal electronics are also coated with corrosion-resistant coating, adding an extra layer of protection over the already total waterproof design.

Splash Drone 4 Fishing Drone

All-new IP66 waterproof remote controller

The all-new SplashDrone 4 remote controller is now waterproof for your worry-free operation. You can even toss it on the water or rinse off the collected sand. The built-in GPS offers a variety of new features, including real-time tracking and dynamic return to pilot. The remote controller is now capable of offering multiple devices connection for a better collaborative operation.

Splash Drone 4 waterproof remote control

Swellpro Splash Drone 4 Remote features

Interchangeable Camera

Multi-functional Payload Options. With its modular multi-functional payload system and open interface design, the SplashDrone 4 can quickly adapt to different tasks in the field.

For Filming

Waterproof 3-axis 4K camera – Capture smooth videos and crisp photos with the new, fully waterproof 4K camera stabilized by a 3-axis gimbal.GC3-S is our flagship gimbal camera. The powerful gimbal remains stable even in the water while taking the underwater shots. GC3-S now has Pro mode and supports RAW photos. ND filters can also be added for greater creative freedom.

Waterproof 2 axis night vision camera

The new night vision camera comes with a spotlight that can illuminate nighttime scenes and restore true colors. Even without the LED, the camera itself can still capture decent details in low-light situations.

Splash Drone 4 Fishing Camera GC2

Waterproof 1-axis 4K camera

With the same sensor as GC3-S, GC1-S can capture high-quality 4K videos and crisp photos. It also has Pro mode and supports RAW photos. ND filters can be added for greater creative freedom.

SwellPro Fishing Drone Bait Release

Economical Release without Camera

The PL-1 payload release turns the SplashDrone 4 into an aerial bait dropping system that can deliver 2KG of bait and drop the bait at targeted locations up to 4km. The PL-1 can be mounted together with your choice of camera accessories for targeted payload release. Using the SwellPro NaviFLy app, you can program the bait drop or replay flights to successful fishing locations.

Splash Drone Fishing Bait Release

Innovative Smooth+ Flight Control

The patented “Smooth+” flight control allows the pilot to finely tune the Roll and Yaw of SplashDrone 4.Smooth+ makes professional, steady flight control as easy as turning the knobs. Want to take a steady shot? Simply switch to Smooth+ control; together with our 4K 3-axis gimbal, you can effortlessly take high-quality, ultra-smooth & steady shots.

Swellpro Splash Drone 4 fishing drone remote

5 Kilometer (3.5 Miles) Distance

The latest 5.8GHz digital image transmitter and adjustable antennas ensure a clear and reliable image and control signal range to the SplashDrone 4 of over 5km while airborne.

Swellpro app Splash Drone 4

Important: Due to the nature of radio waves, when flying just 0.5m above the water, the range is still up to 2.8km and floating on the water surface; the transmission range is 500 meters.

Power flip

When the drone turns upside down on the water for any reason, the Power-Flip feature turns the drone back to the normal state to take the control back.

splash drone 4 on water floating

The SplashDrone 4 constantly records the GPS position of the remote controller, allowing the aircraft to always return to the pilot‘s position even if they are on a moving boat far away from the original take-off point.

Swellpro Splash Drone 4 GPS Return to home

Intelligent Follow me

Actively track the position of the pilot at a constant angle from the front, side, and back with the camera always pointing to the subject.

Orbit Follow

Automatically follow and orbit around a moving object at a chosen radius.

Splash Drone fishing bait release

Boat Mode

Equipped with floating foams, the boat mode allows SplashDrone 4 to sail on the water just like a boat, providing great underwater shots while remains the water area uninterrupted. Caves and other overhead environments can now be accessed by SplashDrone 4 for research, exploration, and underwater photography.

Splash Drone 4 Boat Mode

Unrivalled-performance Propulsion System

The more powerful 740Kv Motor, 40A ESC, and optimized aerodynamic design allow for tight, responsive, and total control of SplashDrone 4 in any challenging weather conditions.

Splash Drone 4 Motors

Smart Battery

The new slide-in smart battery has an internal battery management system for real-time power monitoring and protection both in charging and discharging, ensuring battery health, safety, and a longer lifespan. The 6600mAh high-performance lithium technology cells provide up to 30 minutes of flight time.

Splash Drone 4 Smart Battery

Effortless Autopilot – The Swellpro Navifly App

The newly-developed SwellPro Navifly APP enables logging, planning, recording of missions as well as the control and parameter setting of cameras and other modules in flight.

Swellpro Splash Drone 4 Mobile App

SplashDrone 4 offers API for third-party software to gather data from sensors and configure its aircraft control, gimbal, camera, and third-party add-ons.

Splash Drone 4 Instruction Manual
SDK allows deep integration of third-party add-ons to SplashDrone 4. Together with API, SplashDrone 4 is truly a multi-purpose & multi-functional platform for your imagination.

Splasg Drone 4 Rescue

Splash Drone 4 Aircraft Specifications

Waterproof Rating: IP67
Weight(include battery and propellers): 2.18 kg
Axis Diameter: 450 mm
Max Ascend Speed: 4 m/s
Max Descend Speed: 4 m/s
Max Flight Speed: 22 m/s(ATTI), 10 m/s(GPS)
Max Tilt Angle: ATTI: 12.5°; ATTI (fast): 25°
Max Altitude from Takeoff Point: 120m (GPS) / ATTI – no limitation
Max Wind Speed Resistance: 72 km/h | 20 m/s | 39 knot
Max Flight Time: 30 mins (no wind & no load);
(approx. 25 mins with GC3-S,approx. 15 mins with a load of 1.5kg)
Hovering Precision: ±0.5 m (vertical); ±0.5 m (horizontal)
Max Flight Distance: 5.0 km
Max Payload Capacity: 2.0 kg
Flight Control: Hawk
Digital Video Transmission: MultiSync
Motor: #3509 – 740Kv (special coated)
ESC: 40A (flux)
Propellers: #1242 carbon fiber quick release propellers
Motors: #3509 – 740Kv
Operating Frequency: 5180 – 5875 MHz
Transmitter Power (EIRP): FCC/IC: ≤ 24 dBm
CE/SRRC/MIC: ≤ 20 dBm
Working Temperature: -10℃ ~ 40℃
Satellite Positioning Systems: GPS/GLONASS
Pass-through Serial Port: Connect to a third-party device and transfer the data of the third-party device to the remote control
UART: Allows for TTL serial port to TCP, with a baud rate of 115200
Wi-Fi Hotspot IP: 192.168.1.101:2222
Power Input: 12V/2A | 5V/2A

Remote Controller (MRC)

Waterproof Rating: IP66
Operating Frequency: 5180 – 5875 MHz
Transmitter Power (EIRP) FCC/IC: ≤ 24 dBm
CE/SRRC/MIC: ≤ 20 dBm
Real-time Video Transmission: 720P@30fps
Latency: 200 ms (It depends on the actual shooting environment and mobile devices)
Battery: 2S 3600mAh
Working Time: 7 hours
Working Current/Voltage: 0.3A/7.4V
Ethernet Port: IP: 192.168.2.220:2222
Wi-Fi Hotspot IP: 192.168.2.220: 2020; Default password: 12345678
Mobile Device Mount: Suitable for any size phones;
Tablets require a larger mount(sold separately)
Screen: 2.68 inch, 128×64
Working Temperature: -10℃ – 40℃
Remote Charging time: 3 hours
Power Input: 5V/2A

Intelligent Battery (IB4)

Nominal Capacity: 6600mAh
Voltage: 14.8V
Type: Intelligent 4S LiPo
Watt-Hours: 97.68 Wh
Size: 153.6*82.4*48.3mm
Weight: 735 g (±5 g)
Working Temperature: -10℃ – 40℃
Charging Time: 1.5 hour
Max Charging Power: 84 W

Charger

Input 100 – 240V, 50/60Hz
Output: 16.8V@Dynamic Current / 5V@1.5A
Rated Power: 84.5 W

Mobile Device connection

Operation Frequency 5180 – 5875 MHz
Max Transmission Distance
(Unobstructed, free of interference)
10 m

APP

Mobile App Name NaviFly
Live View Quality 720p@30fps
Latency < 250 ms (depending on environmental conditions and mobile devices)
1-Axis Gimbal Camera (GC1-S)
Waterproof: IP67
Axis: 1-axis (tilt)
Controllable range: tilt: -90° to 0°
Max control speed: tilt: 60°/s
Weight: Approx. 145g
Size: 71*55*65mm
Sensor: 1/2.3″ 12M SONY CMOS
Lens: F4.53mm f/2.65, FOV: 92.6°
ISO Range: 100 – 3200
Shutter Speed 16 – 1/16000 s
Photo Resolution: 4:3/16:9  12MP
Burst Mode: 3/5/10 pcs
Interval Shot: 1/3/5/10s
Video Resolution: 4K: 3840*2160/30P | 2.7K: 2704*1520/60P | FHD: 1920*1080 30/60/120P | HD: 1280*720/240P
Max Video Bitrate: 64 Mbps
Photo Format: JPEG / DNG (RAW)
Video Format: MP4 / MOV
Memory Card: Micro SD card: supports up to 128GB of capacity, write speeds ≥ 60 MB/s, and transfer speed rating of Class 10 or above, or with UHS-1 rating.
Working Temperature: -10℃ to 40℃

2-Axis Night Vision Gimbal Camera (GC2-S)

Waterproof: IP67
Axis: 2-axis (tilt, roll)
Controllable range: tilt: -90° to 0°
Max control speed: tilt: 60 °/s
Weight: Approx.220g
Size: 113*92*80mm
Sensor: 1/2″ 2M Starlight CMOS
Lens: FOV: 66°
Burst Mode: 3/5/10pcs
Interval Shot: 1/3/5/10s
Video Resolution: FHD: 1920*1080 30/60P | HD: 1280*720 120/60P
Max Video Bitrate: 64 Mbps
Photo Format: JPEG
Video Format: MP4 / MOV
Memory Card: Micro SD card: supports up to 128GB of capacity, write speeds ≥ 60 MB/s, and transfer speed rating of Class 10 or above, or with UHS-1 rating.
Working temperature: -10℃ to 40℃

3-Axis Gimbal Camera (GC3-S)

Waterproof: IP67
Axis: 3-axis (tilt, pan, roll)
Controllable range: tilt: -90°to 0°
Max Control Speed: tilt: 60°/s
Weight: Approx. 310g
Size: 113*92*110mm
Sensor: 1/2.3″ 12M SONY CMOS
Lens: F4.53mm f/2.65, FOV: 92.6°
ISO range: 100 – 3200
Shutter Speed 16 – 1/16000 s
Photo Resolution: 4:3/16:9  12MP
Burst Photo: 3/5/10 pcs
Interval Photo: 1/3/5/10s
Video Resolution: 4K: 3840*2160/30P | 2.7K: 2704*1520/60P | FHD: 1920*1080 30/60/120p | HD: 1280*720/240p
Max Video Bitrate: 64 Mbps
Photo Format: JPEG / DNG (RAW)
Video Format: MP4,MOV
Memory Card: Micro-SD card with a maximum capacity of 128GB, write speed ≥ 60 MB/s, supports Class 10 or above & UHS-1 rating
Working temperature: -10℃ to 40℃

3-Axis Thermal Gimbal Camera (GC3-T)

Waterproof: IP67
Axis: 3 axis (tilt, pan, roll)
Controllable range: tilt: -90° to 0°
Maxcontrol speed: tilt: 60°/s
Weight: Approx. 450g
Size: 110*100*115mm

Low-light Camera

Image Sensor: 1/2″ 2M Starlight CMOS
Lens: FOV: 66°
Burst Photo: 3/5/10pcs
Interval Photo: S1/3/5/10s
Video Resolution: FHD: 1920*1080 30/60p | HD: 1280*720 120/60p
Max Video Stream: 64 Mbps
Photo Format: JPEG
Video Format: MP4 / MOV
Support Memory Card: Micro SD card: supports up to 128GB of capacity, write speeds ≥ 60 MB/s, and transfer speed rating of Class 10 or above, or with UHS-1 rating.
Working temperature: -10℃ to 40℃

IR Camera

Image Sensor: Vanadium oxide uncooled infrared focal plane detector
Lens: 19mm/25mm
Resolution@frame rate: 640*512 @30p/48p/50p
Palette: White hot / black hot / Rainbow / Rainbow high contrast / iron red / lava / Sky / medium gray / grey red / purple orange / Special 1 / warning red / ice fire / cyan red / special 2 / gradient red / gradient green / gradient blue / warning green / warning blue
Crosshairs: Show (default), hide, move
Contrast Ratio: Slider adjustment (0-255)
Brightness: Slider adjustment (0-511)
DDE gear (image enhancement): Off / On (default on)
Temperature measurement OSD on / off: Off / On (the default displays the highest, lowest, and center point temperatures)
Temperature measurement unit: Centigrade, Kelvin, Fahrenheit
Temperature measurement alarm: Off, low-temperature alarm, high-temperature alarm, high and low-temperature alarm
Low-temperature alarm setting: -20℃~+150℃
High-temperature alarm setting: -20℃~+150℃

Fixed Angle Camera (FAC)

Waterproof Rating: IP67
Weight: Approx. 85 g
Size: 45*44*40mm
Image Sensor: 1/2.7″ 2M SONY CMOS
Lens: F2.2mm f/5.06, FOV: 130°
Burst Photo: 3/5/10pcs
Interval Photo: 1/3/5/10s
Video Resolution: FHD:1920*1080 30/60p,HD:1280*720 120/60p
Max Video Stream: 30 Mbps
Photo Format: JPEG
Video Format: MP4 / MOV
Memory Card: Micro SD CARDS with a maximum capacity of 128GB, write speed ≥30 MB/s, supports Class 10 or above & UHS-1 rating
Working temperature: -10℃ to 40℃

Payload Release (PL1-S)

Waterproof Rating: IP67
Weight: 59*38*50mm
Size: 96 g
Max. loading weight: 2 kg

Parachute (PTE4)

Size: 155*134*122mm
Weight: 500 g
Max. loading weight: 6 kg
Release: Manual/Automatically

Life Buoy (LB1)

Weight: 366 g
Size: 205*100*65 mm
Material: Polyester Oxford neoprene
Airbag material: Nylon+ TPU
Inflation Time: less than 5s
Buoyancy: 150 N
Buoyancy time: more than 48 hrs
Loss of buoyancy after 24 hours: ≤5%
Carbon dioxide weight: 3 / 8-24UNF,24g

Extension Bar

Weight: 366 g
Length: 70 mm
Material: Carbon fiber tube & aluminum base

Dronar 01 (Fish Finder)

Depth Range Max: 120 feet (40 m)
Depth Range Min: 2 feet (0.6 m)
Sonar Frequency: 125 kHz Single Beam
Cone Angle: 30°
Audible Alarms: Fish, Depth, Low Battery
Working Temperature: -20℃ to 80℃
Transmission Distance: 10 m with the phone; 3km with drone
Interface: Dronar APP
Battery: 3600 mAh, 11.1 V; 39.96 Wh
Connection: 5Ghz Wi-Fi

Reviews

There are no reviews yet.

Be the first to review “Splash Drone 4 Swellpro Waterproof Drone Night Fishing Bundle”

Product Manuals

If applicable, the Product Documentation, Reference Materials, CAD design(s),.STEP file(s) and/or other drawing files, Manuals, and Tutorials will be available for download upon purchase. The order confirmation email will include a downloadable link to the product file(s), which can also be downloaded from the My Account section if needed.


SwellPro is the original maker of SplashDrone and Spry. We’ve provided SplashDrones to water sports enthusiasts for professional photography and the fishing market for fun. Now it has a new stage on the SAR market to help with firefighting, water rescue, water conservancy survey, and many other missions. SplashDrone is the most advanced waterproof drone for aerial filming and fishing. Spry is the world’s first and only waterproof action drone. With waterproof function fly on the sea, in rainy or snowy weather, and payload release 1.2kg system with different camera for choice, one drone, multiple usages.

Shipping Policy

WE SHIP WORLDWIDE: We primarily ship via FedEx, UPS, DHL, EMS, TNT, and USPS because they are fast, reliable, and easily trackable. We usually ship within two to three business days after the full payment. Standard delivery generally occurs within 5 to 7 business days after the shipping date. However, sometimes delivery may take about 7 to 10 business days, depending on the shipping destination, logistics mode, weather conditions, product weight, size, or shipping company distribution structures based on re-planning, such as staff shortages caused by COVID.

SHIPPING COSTS: For some industrial products, e.g., heavy wheels, CNC machines, etc., the shipping cost is calculated based on the product weight, not quantity. To benefit from lower shipping costs for orders with multiple items, please contact us at sales@ozrobotics.com. Our shipping rates are listed very clearly on each product page under the SHIPPING tab. Additionally, to see the shipping cost for your country, add the item to the Shopping Cart; you will see the shipping cost based on your Country and Location.

CUSTOMS and TARIFFS: While not all products require customs fees, some products may require a minimal tariff if applicable in your country for orders with $800.00 and above. The total amount for your order does not include a customs fee/tariff. A tariff belongs to the buyer when applicable. Why don't we add tariffs to the product's retail price? - If all countries were deducted the same amount of tariff, we would have added the tariff amount to the product price. However, we do not do that because each country charges a different amount, while some do not even charge. Therefore we can't add any tariff to the product's retail pricing. Oz Robotics, our Manufacturing partner, or our Supplier is not responsible for tariffs on any shipment. Please check the "By" and "Made In" sections on each product page to see the country of the manufacturer or supplier for that product. The total amount for your order does not include any duties, import taxes, customs fees, and GST/VAT. The buyer must pay all import duties. Please click here to see more on Tariffs.

Return Policy

COVID: We are suspending product returns due to the current COVID-19 pandemic unless there is a manufacturing defect. Please study the product and ask us questions before you buy. Thank you.

ORDER CANCELLATION: After you place an order, you have 5 hours to request an order cancellation. After 5 hours, your item(s) have either already been shipped, prepared to ship, or are currently being custom-made. It means we will not process your cancellation request after this period has passed. By placing your order, you signify that you agree to be bound by our Order Cancellation Policy.

PAYPAL and STRIPE SERVICE FEES: Please note both PayPal and Stripe do not offer a refund for the service fees they charge when you purchase a product. Therefore, after placing an order, if you change your mind and ask for a refund, we will deduct the service fee for PayPal or Stripe, whichever one you used to purchase. If you have any questions about this, please contact PayPal or Stripe.

EXCHANGE POLICY: Oz Robotics wants you to be happy with your new purchase. However, we abide by the exchange policy of our suppliers because we do not manufacture these products; our suppliers do. Once you used the product, our supplier(s) and we have the right not to issue a refund. Still, we will offer an exchange for the wrongly purchased items or products with serious and irreversible defects or technical problem(s). The buyer will pay the shipping fee for wrongly purchased products or any other similar issues. If the product you purchased is defective, please email us at support@ozrobotics.com with some photos or a video of the defective parts to evaluate before you send it. Click HERE for more on Refund and Replacement Policy

REFUND POLICY: Oz Robotics accepts refunds on a minimal basis unless there is a manufacturing defect. For any electronic items, returns are only accepted on devices with serious and irreversible problems; meanwhile, the customer must apply for the returns within seven days from the delivery date. Before a refund acceptance, please include images or a video and any other material proof of the defect. However, we abide by the exchange policy of our suppliers because we do not manufacture these products; our suppliers do. For more info on Refund and Replacement Policy please visit Refund and Replacement Policy.

Other than our supplier’s default policy, once a return is agreed upon, you can ship your defective item to the provided return address that you should receive from us first. Please ship the order in original packaging with all the accessories and additional parts. If the Required Parts are not sent back, they will be billed for or expected to be shipped at a later stage. And only once all items have arrived will our staff check the returned product for testing. Include in your package a signed letter stating the reason for your return and the original receipt as well as any mentioned proof of defect, images, or a video, etc. It will help us to speed up the process on your behalf.

The purchaser (customer/buyer) is responsible for all shipping costs when returning an item. However, upon receiving the returned order, we will assess the product. If it is determined that there is, in fact, a manufacturing defect, then we will refund the shipping costs as well as repair or replace or refund the full amount to the purchaser if the product is not fixable.

If you wish to return an unused product, please do so within seven days from the ship date for a refund on the purchase price, minus shipping, handling. Refunds will be credited to the original credit card used for payment in 24-48 HOURS after receiving the product back. We will charge 50% restocking fee.

Once your return is received and inspected, and if agreed for a refund, refunds will be credited to the original credit card used for payment in 24-48 hours. Please note that we will charge a 50% restocking fee once you return a product without any defect.

Once your refund is processed, PayPal will return the money to the card used. It may take at least five business days (depending on the bank and credit company) before your refund is posted in your bank account and statements. Contact Us if you still have not received your refund after 5 business days.

Do not return your product to our New York office. For any exchange or refunds, please email us first at support@ozrobotics.com for us to provide you with the steps that need to be followed. Any product you return must be in the same condition you received and returned in the original packaging without being used. Please keep the original receipt. More on Refund and Replacement Policy.

Shipping costs

Region / Country State Postcode Cost
United States (US) Any Any $115.00

Upon submitting your question, your email will include the product link automatically.

There are no questions yet. Be the first to ask a question about this product.

Send me a notification for each new answer.

Start Selling on Oz Robotics

Reach out to millions of new customers, and increase your sales through paid advertising at no cost! Sell your Hardware, Software, and Tech Services: More info.

Become an Affiliate and Earn Extra Income!

You’re already sharing so many things online without making any money! So why not share our products and earn an extra income when visitors buy. Details