Technical Notes on Next Generation Aero Combustor Design-Development and Related Combustion Research

$95.00

This book aims to identify that extra high-pressure ratio (such as about 70) civil aero-engine low emissions combustors and extra high fuel-air ratio (FAR) (such as FAR>0.051) military aero-engine combustors make up the next generation of aero combustors.

Technical Notes on Next Generation Aero Combustor Design-Development and Related Combustion Research

This book aims to identify that extra high-pressure ratio (such as about 70) civil aero-engine low emissions combustors and extra high fuel-air ratio (FAR) (such as FAR>0.051) military aero-engine combustors make up the next generation of aero combustors. The aerothermal design of these combustors is very different from previous combustors, and the major design points are proposed. Two types of high-pressure low emissions combustor design have been suggested: one is without fuel staging, and the other is with fuel staging. The high FAR combustor design is brand new.

The layout of the next-generation aero combustor is very different. There are no primary holes, no intermediate holes, and no dilution holes. They all have direct mixing combustion. For low-emissions combustors, it is lean, direct mixing (LDM) combustion. For high-FAR combustors, it is stoichiometric direct mixing combustion. As a result, combustion air fraction is very high (such as >75%). That will induce idle condition lean blowout (LBO) issue.

The present book has proposed several design approaches to solve idle LBO issues, which are effective. Pilot fuel-air combustion is designed at idle conditions. For civil combustors, the maximum condition is designed for low emissions. In contrast, the maximum condition for the high FAR combustor is designed for non-visible smoke, low luminous flame radiation, and good combustion efficiency. The fuel-air module configuration is designed for each type of combustor, which is the essential part of combustor design. The brand-new combustor cooling design has used a compound angle tangential inlet cooling hole configuration. Such a cooling design provides high cooling effectiveness. The diffuser configuration is totally new. It is an air bleeding diffuser, directly stretching forward to contact the dome. The bled air flows to the annular channel as cooling air.

Aero combustor development is discussed in this book. In particular, the combustor developments from technology readiness level (TRL) 3 to TRL level 6 have been discussed in detail. Also reported is the technology to run combustor development tests correctly. Three topics of related combustion research by the present author are summarized in the brochure. They are:

a) Fuel injection and co-flowing air combination. The key point is that for next-generation combustor development, the designer should think about atomizatiInstead. The combination of fuel injection and co-flowing air should also be considered together as a whole device.
b) Fuel spray evaporation calculation, the key is an engineering calculation of multi-component fuel evaporation shall be used.
c) Non-luminous flame radiation calculation, which has been significantly updated.

The present book summarizes the author’s ten years of study on next-generation aero combustors after retirement. It represents an advanced aero combustor technology level.

Product Datasheet and Manual

If applicable, the Product Documentation such as Datasheet, Brochure, Reference Materials, CAD Design, STP Files, Manuals, and Tutorials will be available for download upon purchase from the My Account as needed. On the checkout page, please create an account to download product-related files upon purchase. You won’t be able to download otherwise.


Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

A leading global book and journal publisher specializing in academic books. As of 2018, we are also one of the top publishers in the political science field. We publish nearly 1600 books as well as 50 journals a year. Our books span a wide range of subjects, including but not limited to sports and sports management, political science and economics, education and psychology, women’s health issues, sexual and reproductive health, and aging and age-related diseases.

Shipping Policy

Please check your SPAM folder to ensure you accept emails from OzRobotics.com to receive your tracking number and download product-related files.

WE SHIP WORLDWIDE: We primarily ship via FedEx, UPS, DHL, and USPS because they’re reliable, fast, and easily trackable. We usually ship within two to three business days after the full payment. Standard delivery generally occurs within 5 to 7 business days after the shipping date. However, the delivery may take about 7 to 10 business days, depending on the shipping destination, logistics, weather conditions, product weight, size, or shipping company distribution structures.

SHIPPING COSTS: For some industrial products, e.g., heavy wheels, CNC machines, etc., the shipping cost is calculated based on the product weight, not quantity. To benefit from lower shipping costs for orders with multiple items, please contact us at sales@ozrobotics.com. Our shipping rates are listed clearly on each product page under the SHIPPING tab. Additionally, to see the shipping cost for your country, add the item to the Shopping Cart; you will see the shipping cost based on your Country and Location.

CUSTOMS and TARIFFS: While not all products require a tariff, some products may require a minimal tariff if applicable in your country. The total amount for your order does not include a customs fee/tariff. A tariff belongs to the buyer when applicable. Why don't we add tariffs to the product's retail price? - If all countries deducted the same tariff amount, we would have added the tariff amount to the product price. However, we do not do that because each country charges a different amount, while some do not even charge. Therefore, we can't add any tariff to the product's retail pricing. Oz Robotics, manufacturing partners, or Suppliers are not responsible for tariffs. Please check the "Made In:" and "Brand:" labels on the product page to see the product's origin. The total amount for your order does not include any duties, import taxes, customs fees, and GST/VAT. The buyer must pay all import duties. If you choose not to pay the tariff and parcel returns, there will not be any refund. Please click here to see more on Tariffs.

Return Policy

WITHIN 5 HOURS: Mistakes happen when ordering, so you have 5 hours to request an order cancellation, but even within 5 Hours, we still cannot refund the PayPal or Stripe Processing fee because they do not refund us. After 5 hours, your order has either been shipped, prepared to ship, or custom-made. Therefore, we cannot accept your cancellation request after this period has passed.

AFTER 5 HOURS: If you want to cancel your order after 5 Hours, we will deduct 30% of the total for restocking + PayPal or Stripe processing fees and the Return Shipping cost for unopened packages.

AFTER RECEIVING YOUR ORDER: If you decide not to keep your order after it arrives, we will deduct 70% of the total + the shipping fee if we find it refundable after a review. Please see our Refund and Replacement Policy

EXCHANGE POLICY: Oz Robotics wants you to be happy with your new purchase. However, we abide by the exchange policy of our suppliers because we do not manufacture these products; our suppliers do. Once you use the product, our supplier(s) and we have the right not to issue a refund. Still, we will offer an exchange for wrongly purchased items or products with serious and irreversible defects or technical problem(s). The buyer will pay the shipping fee for wrongly purchased products or similar issues. If the product you purchased is defective, please email us at support@ozrobotics.com with photos or a video of the defective parts to evaluate before you send it. Click HERE for more on Refund and Replacement Policy

REFUND POLICY: Oz Robotics accepts refunds on a minimal basis unless there is a manufacturing defect. For electronic items, returns are only accepted on devices with serious and irreversible problems; meanwhile, the customer must apply for the returns within seven days of delivery. Before a refund acceptance, please include images or a video and any other proof of the defect. However, we abide by the exchange policy of our suppliers because we do not manufacture these products. For more info please visit Refund and Replacement Policy.

Other than our supplier's default policy, once a return is agreed upon, you can ship your defective item to the provided return address that you should receive from us first. Please ship the order in original packaging with all the accessories and additional parts. If the Required Parts are not sent back, they will be billed for or expected to be shipped later. And only once all items have arrived will our staff check the returned product for testing. Include in your package a signed letter stating the reason for your return, the original receipt, proof of defect, images, a video, etc. It will help us to speed up the process on your behalf.

The purchaser (customer/buyer) is responsible for all shipping costs when returning an item. However, upon receiving the returned order, we will assess the product. If it is determined that there is, in fact, a manufacturing defect, then we will refund the shipping costs as well as repair or replace or refund the full amount to the purchaser if the product is not fixable.

If you wish to return an unused product, please do so within seven days from the ship date for a refund on the purchase price minus shipping and handling. Refunds will be credited to the original credit card used for payment 24-48 HOURS after receiving the product back. We will charge a 30% of the total for restocking + PayPal or Stripe processing fees and the Return Shipping cost for unopened packages.

Once your return is received and inspected, and if you agree to a refund, refunds will be credited to the original credit card used for payment in 24-48 hours. Please note that we will charge a 70% restocking fee once you return a product without any defect.

Once your refund is processed, PayPal will return the money to the card used. It may take at least five business days (depending on the bank and credit company) before your refund is posted in your bank account and statements. Contact Us if you have not received your refund after five business days.

Do not return your product to our New York office. For any exchange or refunds, please email us first at support@ozrobotics.com for us to provide you with the steps that need to be followed. Any product you return must be in the same condition you received and returned in the original packaging without being used. Please keep the original receipt. More on Refund and Replacement Policy.

Shipping costs

Region / Country State Postcode Cost
North America Any Any $20.00
South America Any Any $35.00
Australia Any Any $40.00
Asia Any Any $45.00
Africa Any Any $50.00
Europe Any Any $35.00
Everywhere else Any Any $50.00