DroneBeacon db120 RemoteID Broadcast Module with Battery
The DroneBeacon db120 is a direct or broadcast Remote ID long-range transponder equipped with GPS and battery. A transponder is also called an add-on, tracker, tag, or (wireless) number plate. The DroneBeacon can be attached to any (consumer) drone using the 3M dual-lock tape.  It’s compliant with the standards of the EU and the USA. The FAA has approved the db120 for usage in the USA. Furthermore, the transponder is optimized for long-range use due to its transmit power and antenna design. It lso supports all transmission protocols for maximum flexibility.
Specifications
The transponder comprises an embedded system and several radio interfaces to broadcast RemoteID signals. The db120 is a Direct remote identification (DRI) Add-on in the EU. DRI Add-ons are considered payloads in the EU. DRI means a system that ensures the local broadcast of information about a Unmanned aircraft (UA) is in operation, including the UA’s marking, so that this information can be obtained without physical access to the UA. A D I add-on is a standalone direct remote ID broadcast device that integrates a GNSS function and communication. Fun tion, providing position, height, speed over ground, track clockwise with true north of the UA, and its take-off position. In he USA, the db120 is a Remote ID broadcast module.
Key Specifications: Compliant with international regulations
- EU ASD-STAN DIN EN 4709-002
- USA ASTM Remote ID Standard ASTM F3411-22a-RID-B/ F3586-22
- Accepted by the FAA https://uasdoc.faa.gov/listDocs/RID000000058
Supports all Remote ID transmission protocols:
- BLE legacy
- BLE long range
- WLAN NaN 2.4 GHz (not allowed in the USA)
- WLAN Beacon 2.4 GHz
- Long range up to 5 km detection range
- Â Omni-directional antenna with 0 dBi gain
- Transmit power: +18 dBm (WLAN and Bluetooth)
- Battery life: > 3 hours
- 2 Wh (LiPo 3.7V 600 mAh)
Positioning
- GPS and BDS: 2.5m positioning precision
Suited for outdoor operations:
- IP43 rating: the transponder must be protected against water for operation in rainy conditions.
- Dimensions (l x w x h): 48 x 38 x 28 mm.
- With screw nodes, the dimensions are 48 x 51 x 28 mm
- Operating temperature
- -5°C to +40°C
- Weight: 25 g
What’s in the Box
- 1x db120 transponder
- 3x 3M dual-lock
Reviews
There are no reviews yet.