Primary Starter Kit for Arduino UNO R3 with 27 Projects

$43.99

Excellent Manual – 147 pages, 27 projects, take you from the primer to the mastery; Well-planned Processing lessons – Arduino interacts with the Computer

Adeept Primary Starter Kit for Arduino UNO R3 with 27 Projects and Processing

Features:

A wide variety of electronic components – The best choice for Arduino beginners
Excellent Manual – 147 pages, 27 projects, take you from the primer to the mastery
Well-planned Processing lessons – Arduino interacts with the Computer
Powerful technical support – Official forum, YouTube videos and E-mail
Adeept Arduino UNO R3 board is included.

Download Tutorials:
https://www.adrive.com/public/gqqvB3/AdeeptPrimaryStarterKitForArduinoUNOR3V1.zip

Related Videos:

Lessons:
Chapter 1 LED
Project 1.1 Blinking LED
Project 1.2 LED Flowing Lights
Chapter 2 Button
Project 2.1 Controlling an LED with a button
Chapter 3 Tilt Switch
Project 3.1 Tilt Switch
Chapter 4 Buzzer
Project 4.1 Active Buzzer
Chapter 5 PWM
Project 5.1 Breathing LED
Project 5.2 Passive Buzzer
Project 5.3 Controlling a RGB LED with PWM
Chapter 6 7-segment display
Project 6.1 7-segment display
Chapter 7 Analog
Project 7.1 Photoresistor
Project 7.2 Photoresistor controls LED
Project 7.3 Thermistor
Project 7.4 Temperature alarm
Project 7.5 Electronic organ
Chapter 8 LCD1602
Project 8.1 LCD1602
Project 8.2 IIC Interface module
Project 8.3 LCD1602 Display Photoresistor data
Chapter 9 Frequency meter
Project 9.1 Frequency meter
Chapter 10 Rotary Encoder Module
Project 10.1 Rotary Encoder Module
Project 10.2 Rotary Encoder controls RGB
Project 10.3 LCD1602 display the value of the rotary encoder
Chapter 11 Ultrasonic Distance Sensor
Project 11.1 Ultrasonic Distance Sensor
Project 11.2 11.2 LCD1602 display Ultrasonic value
Chapter 12 Processing + Raspberry Pi
Project 12.1 Photoresistor Control picture brightness
Project 12.2 Processing Control RGB
Project 12.3 Processing Detect Ultrasonic data
Project 12.4 Processing pong

Package List:
1x Adeept Arduino UNO R3 Board
1X Rotary Encoder Module
1x DC Motor
1x L9110 motor driver
1x LCD1602
1x I2C Interface Module
1X Ultrasonic Distance Sensor
1x 7-Segment Display
1x NE555 Chip
1x Passive Buzzer
1x Active buzzer
2x Photoresistance
2X Thermistor
2x Tilt Switch
2x Switch
1x RGB LED
4x Red LED
4x Green LED
4x Yellow LED
4x Blue LED
16x Resistor(220Ω)
10x Resistor(1 kΩ)
10x Resistor(10 kΩ)
5x Capacitor(104)
2x Capacitor(10uF)
4x Button(large)
8x Button(small)
1x Button cap(red)
1x Button cap(white)
2x Button cap(blue)
2x NPN Transistor(8050)
2x PNP Transistor(8550)
2x Potentiometer(10KΩ)
1x 9V Battery Holder
1x Breadboard
1x USB Cable
40x Male to Male Jumper Wires
20x Male to Female Jumper Wires
1x 4-Pin Wires
1x 5-Pin Wires
1x Band Resistor Card
1x Project Box

Reviews

There are no reviews yet.

Be the first to review “Primary Starter Kit for Arduino UNO R3 with 27 Projects”

Product Manuals

If applicable, the Product Documentation, Reference Materials, CAD design(s),.STEP file(s) and/or other drawing files, Manuals, and Tutorials will be available for download upon purchase. The order confirmation email will include a downloadable link to the product file(s), which can also be downloaded from the My Account section if needed.


Adeept is a technical service team of open source software and hardware. Dedicated to applying the Internet and the latest industrial technology in open source area, we strive to provide best hardware support and software service for general makers and electronic enthusiasts around the world.

Shipping Policy

We primarily ship via FedEx, UPS, DHL, and USPS because they are reliable, fast, and easily trackable. We usually ship within two to three business days after the full payment is received. Standard Delivery generally occurs within 5 to 7 business days after the ship date. However, sometimes delivery time depends on destination, logistics mode, weather conditions, size, and product weight.

SHIPPING COSTS: For some industrial products, e.g., wheels, and CNC machines, etc. the shipping cost is calculated based on the product weight, not quantity. To benefit from lower shipping costs for orders with multiple items, please contact us at sales@ozrobotics.com. Our shipping rates are listed very clearly on each product page under the SHIPPING tab. Additionally, to see the shipping cost for your country, add the item to the Shopping Cart, there you will see the shipping cost based on your Country and Location.

ORDER CANCELLATION POLICY: By placing your order, you signify that you agree to be bound by our Order Cancellation Policy.

REFUND AND REPLACEMENT POLICY: For more info on Refund and Replacement Policy please visit Refund and Replacement Policy.

DUTY TAX, CUSTOMS, IMPORT FEES AND TARIFFS: While not all products require customs fees, but some industrial items may require a minimal tariff if applicable in your country. The total amount for your order does not include a customs fee. A minimal tariff belongs to the buyer when applicable. Oz Robotics is not responsible for tariffs for any shipment. Please check the “ Made in: ” section on each product page to see the manufacturer or supplier for that product. Please read our Policies: https://ozrobotics.com/policies/
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Return Policy

EXCHANGE POLICY: Oz Robotics wants you to be happy with your new purchase. However, we abide by the exchange policy of our suppliers because we do not manufacture these products; our suppliers do. Please read the product exchange policy defined by each supplier for their own listed product(s), which can be found under the Shipping tab on each product page. Once you have used the product, our supplier(s) and we have the right not to issue a refund. Still, they will offer an exchange for the wrongly purchased items or products with serious and irreversible defects or technical problems (s). If wrongly purchased products or any other similar issues, the buyer will pay the shipping fee. If the product you purchased is defective, please email us at support@ozrobotics.com with some photos or a video of the defective parts to evaluate before you send it. Click HERE for more on Refund and Replacement Policy

REFUNDS/RETURNS: Oz Robotics accepts returns on a minimal basis unless there is a manufacturing defect. For any electronic items, returns are only accepted on devices with serious and irreversible problems; meanwhile, the customer must apply for the returns within 7 days from the delivery date. Before a refund acceptance, please include images or a video and any other material proof of the defect. However, we abide by the exchange policy of our suppliers because we do not manufacture these products; our suppliers do.

Other than our supplier’s default policy, once a return is agreed upon, then you can ship your defective item to the provided return address that you should receive from us first. Please ship the order in original packaging with all the accessories and additional parts. If the Required Parts are not sent back, they will be billed for or expected to be shipped at a later stage. And only once all items have arrived as a full system can we check the returned product for testing. Include in your package a signed letter stating the reason for your return and the original receipt as well as any mentioned proof of defect, images, or a video, etc. This will help us to speed up the process on your behalf.

The purchaser (customer/buyer) is responsible for all shipping costs when returning an item. However, upon receiving the returned order, we will assess the product. If it is determined that there is, in fact, a manufacturing defect, then we will refund the shipping costs as well as repair or replace or refund the full amount to the purchaser if the product is not fixable.

If you wish to return an unused product, please do so within 7 days from the ship date for a refund on the purchase price, minus shipping, handling. Refunds will be credited to the original credit card use for payment in 24-48 HOURS after receiving the product back. We will charge 50% restocking fee.

Once your return is received and inspected, and if agreed for a refund, refunds will be credited to the original credit card used for payment in 24-48 hours. Please note that we will charge a 50% restocking fee if you want to return a product without any defect.

Once your refund is processed, then PayPal will return the money to the card that was used. It may take at least 5 business days (depending on the bank and credit company) before your refund is officially posted in your bank account and statements. Contact Us if you still have not received your refund after 5 business days.

Do not return your product to our New York office. For any exchange or refunds, please email us first at support@ozrobotics.com for us to provide you with the steps that need to be followed. Any product you return must be in the same condition you received and returned in the original packaging without being used. Please keep the original receipt. More on Refund and Replacement Policy.

Shipping costs

Country State Postcode Cost
Any Any Any $15.00

If you have any questions with regards to this product, please ask us here. This will include the product link automatically.

There are no questions yet. Be the first to ask a question about this product.

Send me a notification for each new answer.

Make Money!

Start Selling – Suppliers and Manufacturers, let us help you sell your products on OzRobotics.com – Details


Freelancers – Generate Revenue by Offering Your Freelance Skills on OzRobotics.com – Details


Affiliates – You’re already sharing so many things online without making any money; why not share our products and make money when your visitors buy – Join Now


You may also like…