OEM Receiver Processor with ADS-B, GNSS, UAT TT-SF2

$382.00

The patented solution allows high-speed RF data processing with a significantly reduced number of electronic components.


Ships From: Poland

Supplier: Aerobits SKU: TT-SF2 OEM Categories: , , Tags: , , , , More From:

OEM Receiver Processor with ADS-B, GNSS, UAT TT-SF2

ADS-B, GNSS, UAT

  • TT-SF2 is a high-quality and low-price OEM ADS-B/GNSS receiver/FLARM transceiver series operating at 1090MHz and region-dependent FLARM frequency. It is based on the proven FPGA-In-The-Loopâ„¢ technology, a unique combination of a single FPGA. The patented solution allows high-speed RF data processing with a significantly reduced number of electronic components.
  • Simultaneous miniaturization of the module and its OEM nature opens various possible applications.

Product Status

To provide the highest level of service to our customers, we would like to inform you about the current stage of the Aerobits product life cycle. Below, you will find a definition of the life cycle, and each product on the site is marked at which stage of the life cycle.

Product lifecycle in Aerobits

  • In development – Product in preparation. Not available for purchase.
  • Engineering samples – Product still in development. Small quantities are available for test purposes.
  • Active is – Product is available for purchase and fully supported. EOS and EOL dates are not defined
  • NRND (Not Recommended for New Design) – The product will be discontinued. It will probably be replaced by a better design. EOS and
  • EOL dates are defined.
  • EOS (End Of Support): The product is no longer maintained, and support is limited. The product can not be purchased via a webpage. To purchase a product, don’t hesitate to contact sales.
  • EOL (End of Life) means the product is no longer produced and can only be bought in larger quantities.

Features

  • Fastest ADS-B implementation on a surface of < 4 cm2
  • Receiving ADS-B, Mode-A/C/S with RF signal
  • RAW HEX, CSV, AERO, MAVLink, ASTERIX, GDL90
  • Strength/quality analysis
  • Timestamp for multilateralism
  • Best-in-class aircraft tracking
  • Scalable OEM solution with enormous customization potential
  • Firmware update capability
  • Weight < 2g
  • Designed to meet the MOPS defined in TSO-C199
  • Evaluation kit available

Applications

  • SAA / DAA (Sense and Avoid / Detect and Avoid)
  • UAS ground stations and high-density traffic surveillance
  • UTM / U-Space construction (traffic surveillance network)
  • Traffic-flow analysis and statistics
  • Monitoring of the 1090 MHz band (signal integrity check)
  • ADS-B/In/Out devices that meet the NextGen/SESAR philosophy

Notice: Price includes a life-long FLARM license.

Additional information

Variant

Version a – antenna input on pin, Version b – antenna input to UFL connector

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Aerobits is a specialized developer of miniature avionic systems, such as transponders, for unmanned aerial vehicles, UAVs, and drones. Using patented technology, our hardware and software solutions process radio signals on minimal surfaces. This concept is at the core of our OEM modules low-level assembly function modules, which are the basic building blocks of miniaturized avionics.

We support global initiatives to integrate UAS into civilian airspace, develop the path towards full autonomy, and specialize in air traffic control systems, essential components of future UTM unmanned traffic management and U-Space solutions.

UAS entered the orderly airspace that until now was used only by manned air traffic. Legal regulation of the use of the airspace is insufficient for many reasons and forces the search for system concepts. A hint is aviation solutions and procedures that have evolved over the years along with the growing traffic volume. With various radars, ATMs Air Traffic Management can locate manned aircraft and guarantee safe separation between them. Also, unmanned systems like UTM Unmanned Traffic Management are planned to be implemented. UTM will be nothing else but a functional extension of ATM. It is about integrating drones into the airspace, which is seen as one of the most significant challenges of modern aviation. The main difficulty is to ensure anti-collision for all airspace users, in line with the DAA Detect and Avoid concept. This goal is achieved by maintaining system compatibility between manned and unmanned aviation. Therefore, it is necessary to miniaturize the avionics, which will allow the installation of appropriate systems on small drones. The intensification of global activities towards including UAS in the airspace shows the idea of fusing many information technologies. In addition to micro-avionic systems, UAS will be equipped with Wi-Fi, Bluetooth, and LTE technologies. It will allow easier identification and tracking by local airspace managers.

Shipping Policy

FAST DELIVERY! We ship worldwide via FedEx, UPS, DHL, and USPS because they’re Fast, Reliable, Affordable, and Easily Trackable. We process orders in 24 hours; delivery may take 4 to 7 days or sooner, depending on your location. Once shipped, you will receive an email with your tracking number.

Ships From: Not all our products are shipped from the USA; we ship some from regions like China, Taiwan, or Europe. Therefore, the tariff you will pay will differ depending on which country your order will be shipped from because not all countries charge the same amount. For example, if the US imposes a 30% tariff on goods from China, other countries may impose a much lower tariff. Check the "Ships From:" label on this product page to see from which country we will ship it.

TARIFF: Check the "Ships From:" label on this product page to see which country we will ship this product from. While not all products require a tariff, some may require a minimal or no tariff in your country. If applicable, the buyer will pay the tariff within their respective country. The total amount of your order does not include a tariff. Please enter a reachable phone number during checkout so the Shipping Company can contact you to pay the tariff once your parcel arrives at your destination.

Why don't we add tariffs to the product's retail price? If all countries imposed the same tariff amount and used the same currency, we would have added the tariff amount to the product price. However, we do not do that because each country charges a different amount and uses a different currency, while some do not even charge a tariff. Therefore, we can't add a tariff to the product's retail pricing. Oz Robotics' manufacturing partners, or suppliers are not responsible for tariffs. Please check the "Ships From:" label on the product page to see the product's origin. The total amount for your order does not include a tariff. The customer must pay the tariff. We will not cancel your order or refund you if you do not pay the tariff. More Details.

SHIPPING COSTS: For some industrial products, e.g., heavy wheels, CNC machines, etc., the shipping cost is calculated based on the product weight, not quantity. For lower shipping costs for orders with multiple items, please email us at sales@ozrobotics.com before you buy. We show shipping rates on the product page under the SHIPPING tab. To see the shipping cost for your country, click add to cart on the product page.

PRODUCT DATASHEET AND MANUAL: If applicable, the Product Documentation, such as the Datasheet, CAD Design, STP Files, Manuals, Reference Materials, and Tutorials, will be available for download upon purchase from the My Account as needed. On the checkout page, please create an account to download product-related files upon purchase. You won’t be able to download otherwise.

##################################

Return Policy

WITHIN 5 HOURS: Mistakes happen when ordering, so you have 5 hours to request an order cancellation, but we cannot refund the PayPal or Stripe Processing fee because they do not refund us.

WITHIN 24 HOURS: Your order has either been shipped, prepared to ship, or custom-made. If you still want to cancel your order after 5 Hours, we will deduct 30% of the total for restocking + PayPal or Stripe processing fees and the Return Shipping cost for unopened packages.

AFTER RECEIVING YOUR ORDER: If you decide not to keep your order after it arrives, we will deduct 80% of the total + the shipping fee if we find it refundable after a review. Please see our Refund and Replacement Policy

EXCHANGE POLICY: Oz Robotics wants you to be happy with your new purchase. However, we abide by the policy of our manufacturer partners because we do not manufacture these products; they do. Once you use the product, we cannot issue a refund. But we will offer an exchange for a wrongly purchased product with irreversible defects or technical problems. The customer will pay the shipping fee for a wrongly purchased product or similar issues. If the product you purchased is defective, email us at support@ozrobotics.com with photos or a video of the defective parts so we can evaluate it before you send it. More on Replacement Policy.

REFUND POLICY: Oz Robotics accepts refunds on a minimal basis unless there is a manufacturing defect. For electronic items, returns are only accepted on devices with serious and irreversible problems; meanwhile, the customer must apply for the returns within seven days of delivery. Before a refund acceptance, please include images or a video and any other proof of the defect. For more info please visit Refund Policy.

Once we agreed on a return, you can ship your defective item to the provided address, which you should receive from us first. Please ship the order in its original packaging with all the accessories and additional parts. If the Required Parts are not sent back, they will be billed for or expected to be shipped later. We will check the product for testing once all items have arrived. In your package, include a signed letter stating the reason for the product return, the original receipt, proof of defect, images, a video, etc. It will help us to speed up the process for you.

When returning the item, the customer is responsible for the shipping cost. However, we will assess the product, and if it is determined that there is a manufacturing defect and the product is not fixable, we will refund the shipping cost, repair, replace, or refund the full amount to the customer.

Do not return your product to our New York office. For any exchange or refunds, email us first at support@ozrobotics.com for us to provide you with the steps that need to be followed. Any product you return must be in the same condition you received and returned in the original packaging without being used. Please keep the original receipt.

Shipping costs

Shipping from Poland
Within Poland $5.00
Outside Poland $40.00

National Shipping Details

Minimum shipping charge per order $5.00
Maximum shipping charge per order $5.00
Free shipping if the order spend is over $1,000.00

International Shipping Details

Minimum shipping charge per order $40.00
Maximum shipping charge per order $40.00
Free shipping if the order spend is over $2,000.00