Pi-Zero-EzConnect KIT – Only connect what you need to Raspberry Pi Zero 40 pin header
If you use or plan to use a Raspberry Pi-Zero for robotics or other data collection and you want to minimize the wiring or customize it, you will need a Pi-Zero-EzConnect KIT to secure the electronics, components, wiring, etc. to the Pi. Soldering is required. Pi-Zero-EzConnect KIT allows customized connections to any Raspberry Pi header pins via terminal blocks.
The form factor follows the Pi-Zero dimensions but follows the 40 Pin header definition set by the Raspberry Pi foundation. This makes the board useable across not only Pi-Zeros but also across Pi-2, P-3, Pi-4, etc., as well as other RaspberryPi clones who follow the 40pin definition.
Pi-Zero-EzConnect KIT enables connections in a nice, compact, easy-to-use board connecting GPIOs or power to a Raspberry Pi. Pi-Zero-EzConnect KIT exposes the 40-pin header available on a Raspberry Pi. All Raspberry Pi header pins are accessible.
- One PiZ-EzConnect bare board
- One 2×20 male header pin
- One 2×20 male-female header pin
- Twelve 2-port terminal block
- Two 3-port terminal blocks
The compact form makes it convenient to use with Pi-Zero, Pi-Zero W, Pi-2, Pi-3, Pi-4, or other Raspberry Pi clones conforming to the Pi-HAT standards. These include Orange-Pi, Asus Tinker Boards, and other boards.