2 x 8 Watt Bluetooth Audio Amplifier Kit – TSA2210
This kit is designed for factory or DIY users. It includes a volume knob, a weatherproof panel mount LED, 2.4GHz Flat PCB Antenna, and a TSA2210U amplifier board. Users can adjust the Bluetooth audio volume either on their smartphone or by turning this actual knob. This kit can be powered with a 12VDC power supply or a 12V battery. The LED can indicate the ON/OFF state and the battery voltage level. Users can easily install this kit in a box to create their audio amplifier products.
The TSA2210U is a 2x8W class D audio amplifier board with Bluetooth 4.0 integration. It features perfect class-D architecture based on the TPA3110D2, and each channel has an 8W power output. Any DC 8V-16V power supply can power this board and can be used to drive any 4Ω or 8Ω passive speakers. The Bluetooth audio volume control circuit is also integrated into this board. Turning the knob clockwise will increase the volume, while turning it counterclockwise will decrease the volume. Clicking the knob will turn the amplifier ON/OFF.
It is perfect for your Hi-Fi applications. You may wish to pair it with a mobile phone or a computer, etc. Power up the amplifier board, and use your phone or PC to search for a new Bluetooth device. The module will appear as “BT Speaker” (you can also change the Bluetooth name if you have a programmer). You don’t need a PIN; pair it, and you can start playing music.
Note: Â When the power voltage is less than 10.3V, the amplifier board automatically turns off and enters standby mode. If you click the knob to try to turn it on again, the LED will blink for 3 seconds and then turn off again.
Specifications:
TA = 20℃, fIN = 1 kHz sine wave, RL = 4Ω. (Unless otherwise stated)
Parameter | Condition | Min | Typ | Max |
Supply Voltage (V) | – | 8 | 12 | 16 |
Quiescent Current (mA) | SD = 2V, No load, Vcc = 12V | – | 20 | 35 |
Input Sensitivity (V) | Gain = 26dB | – | 0.283 | – |
Input Impedance (Kohm) | – | – | 30 | – |
Gain (dB) | – | 26 | ||
Output Power (W rms) | THD+N = 10%, Vcc = 12V | – | 8 | – |
Efficiency (%) | Vcc = 12V, RL = 8Ω, PO = 5W | – | 86 | – |
Minimum Load (ohm) | – | 3.2 | 4 | – |
Frequency Response (Hz) | ±3dB | 20 | – | 22k |
Operating Temperature (℃) | – | -40 | 20 | 65 |
Kit contents:
- TSA2210U Bluetooth audio amplifier board x 1
- Volume knob x 1
- Weatherproof panel mount LED (Green) x 1
- Ribbon cable x 1
- 2.4GHz Flat PCB Antenna – 4dBi x 1
Features:
- Size: 4.8cm x 8cm
- Bluetooth audio volume control
- Working voltage: DC10.3V-16V
- Standby current: 0.12mA@12VDC
- Over/under voltage protection
- Over current protection
- Over temperature protection
- Bluetooth 4.0
Applications:
- Personal computer
- Desktop amplifier
- Microphone preamplifier
- Home DIY
- Vending machine, Lifts
- Interactive kiosks
Reviews
There are no reviews yet.