2WD Rover Pro – The Rover Pro was Built to Withstand any Environment

$9,099.99

The 2WD Rover Pro comes with one battery and charger. Additional batteries, chargers, drive kits, and accessories can be purchased separately. You can also contact us for any custom configurations.

2WD Rover Pro – The Rover Pro was Built to Withstand any Environment.

The Rover Pro was built to withstand any environment. With an IP67 rating, these robots can be outside during weather conditions. The high-quality brushless motors offer more longevity, higher torque, and quieter operation than brushed motors. The high capacity military grade lithium-ion battery is state of the art in capacities, safety, and reliability. The Rover Pro is our most famous robot, with over 1,000 units shipped worldwide.

Specifications

Description Value
Dimensions 62cm x 39cm x 25.4cm [24.4in x 15.4in x 10in]
Weight 11kg [25lbs]
Max Speed 2.5m/s [5.6mph]
Payload Capacity 100kg [220lbs]
Ground Clearance 8cm [3.1in]
Operating Temp -20C to 50C [0F to 120F]
Run time (basic usage) 5 hours
User Power Unregulated 12V-16.8V
Shaft Material Titanium
Motors 2050KV inrunner Brush-less motors
IP Rating IP67

Motors
The Rover Pros use high torque 2050KV in-runner brushless sensor motors. That’s a mouthful, so let’s break down what that means. There are two main types of DC motors, brushed and brushless. Brushes are small strips of metal inside the motor that connect the rotor to the stator.

These brushes wear out over time. Using brushless motors ensures our Rover Pros last a long time. In-runner refers to the fact that the rotor is in the middle. 2050KV refers to how fast the motor spins per volt that is applied. Lower values imply that the motor has more torque, and this is one of the lowest KV motors on the market. We customize them to lower the KV rating. Sensor means a built-in hall effect sensor that allows the motor to start from a stop and spin slower than a sensor-less motor.



Battery
The Rover Pros use a military-grade high-density lithium-ion battery pack with built-in over-current and under-voltage protection, state-of-charge monitoring, temperature monitoring, current monitoring, and voltage monitoring. The operating voltage of the battery is 12V-16.8V. If more than 20A is pulled from the battery, it will shut itself off safely. All of the data from the battery is exposed to our ROS driver.


2WD Rover Pro Files

Rover Pro 2WD Datasheet

2WD STL Optimized for Simulation

View 2WD CAD in F360

More From: