4WD Rover Pro – Extremely Rugged and Capable Mobile Robotics Platform

$9,199.99

The Rover Pro is IP67-rated, perfect for applications involving wet or dirty operating conditions. This robot is ready for whatever you throw at it. It is a highly rugged and capable mobile robotics platform with a chassis designed to take a beating.

It comes with a 4WD Base – Battery and charger. Please scroll down to see pictures of the Additional Kits.

4WD Rover Pro – Extremely Rugged and Capable Mobile Robotics Platform

The Rover Robotics 4WD Bundle accelerates your projects with a rugged open-source robot platform proven in the field with thousands of public safety deployments. The 4WD rover excels at outdoor use. It can reach speeds up to 8mph and range 8 miles. Add electronics and accessories like cameras, lidar, and a charging dock.

  • Rover Robotics 4WD Bundle
  • Highly mobile on nearly any surface indoors or outdoors
  • Speed: Up to 8.0 mph / Range: Up to 8 miles
  • Payload Capacity: Up to 180 lbs
  • Active cooling system / Waterproof IP67

Rover Basic SDK for motor control, data feedback, charging, and power distribution (UART serial interface). It uses a standard mil-spec battery BB2590 (up to 19.8 Ah). Quickly build your custom payloads and software. Internal charging circuitry allows you to add a charging dock for automatic charging, removing the need to remove the battery for charging.

Specifications

Dimensions 62cm x 39cm x 25.4cm [24.4in x 15.4in x 10in]
Weight 11kg [25lbs]
Max Speed 2.5m/s [5.6mph]
Payload Capacity 100kg [220lbs]
Ground Clearance 8cm [3.1in]
Operating Temp -20C to 50C [0F to 120F]
Run time (basic usage) 5 hours
User Power Unregulated 12V-16.8V
Shaft Material Titanium
Motors 2050KV inrunner Brush-less motors
IP Rating IP67
Software ROS1: Stable Release
ROS2: Beta Release


The motor used for 4WD Rover Pro.
The Rover Pros use high torque 2050KV in-runner brushless sensor motors. That’s a mouthful, so let’s break down what that means. There are two main types of DC motors: brushed and brushless. Brushes are small strips of metal inside the motor that connect the rotor to the stator. These brushes wear out over time. Using brushless motors ensures our Rover Pros last a long time. In-runner refers to the fact that the rotor is in the middle. 2050KV refers to how fast the motor spins per volt that is applied. Lower values imply that the motor has more torque, and this is one of the lowest KV motors on the market. We customize them to lower the KV rating. Sensor means a built-in hall effect sensor that allows the motor to start from a stop and spin slower than a sensor-less motor.


The battery used for 4WD Rover Pro.
The Rover Pros use a military-grade high-density lithium-ion battery pack with built-in over-current and under-voltage protection, state-of-charge monitoring, temperature monitoring, current monitoring, and voltage monitoring. The battery’s operating voltage is 12V-16.8V. If more than 20A is pulled from the battery, it will shut itself off safely. All of the data from the battery is exposed to our ROS driver.


Additional Kits

4WD Rover Pro w/ Charging Dock


4WD Rover Pro w/ R&D Payload


4WD Rover Pro w/ Dock and Payload


Note: All variants come with one battery and charger. Additional batteries, chargers, drive kits, and accessories can be purchased separately. You can also contact us for any custom configurations.

The Rover Pro was built to withstand any environment. With an IP67 rating, these robots can be outside during weather conditions. The high-quality brushless motors offer more longevity, higher torque, and quieter operation than brushed motors. The high-capacity military-grade lithium-ion battery is state-of-the-art in capacity, safety, and reliability. The Rover Pro is our most popular robot, with over 1,000 units shipped worldwide.


4WD Rover Pro Files

Rover Pro 4WD Datasheet

4WD STL Optimized for Simulation

View 4WD CAD in F360

More From: