644 Narrow Atmega644 Arduino Compatible Board
644/1284 Narrow: Atmega644 & Atmega1284 Arduino compatible boards. 644 Narrow is a barebone implementing an Atmega644 microcontroller. It is designed to upgrade the Arduino Nano, offering twice the memory capabilities. The upgrade for all your small-footprint Arduino projects. These Atmega644 and Atmega1284 Arduino-compatible boards give you 2 to 8 times more flash and RAM resources and total compatibility.
- Does your project need more resources than available on your Nano, UNO, Leonardo, or even Mega2560 (RAM)?
- While keeping a minimal footprint?
- “644 Narrow” and “1284 Narrow” boards are the best solution.
Still, more resources are needed.
The Nano is a fantastic board that lets you test your project on a breadboard, but many Arduino projects are consuming more and more resources, particularly if you want to use an OLED or TFT display. Flash and RAM resources are likely to be missed. The first solution that comes to mind nowadays is to use a 32-bit board. Unfortunately, this is not a good solution, and one should not consider only their raw specifications.
The 32-bit board (like the “Blue Pill”) challenge – More processing power but also more resources needed.
These boards have a higher clock frequency, 32-bit buses, and more flash and RAM (but no EEPROM). Theoretically, this provides processing powered multiplied by 5 to 10 compared to an Atmega328. However, experience shows that the compiled code is also much heavier. Hence, a sketch that could download to an Atmega328 with 32 Kb of flash won’t fit in a 64 Kb board like the Blue Pill (STM32F103)!
Compatibility problems
Unfortunately, integrating STM32 boards in Arduino is a work in progress. The best Arduino core for STM32 used to be provided by STM32duino.com. This website was also the best source of information for developers. But it closed this summer 2019. Due to a terrible lack of programming references, programming on STM32 in the Arduino environment has become tricky.
Considering the ESP32, a fascinating upgrade possibility, the analogWrite function is not yet supported! You should also notice that while this chip can run at 240 MHz (with a terrible increase in current consumption), it is configured at 80 MHz in the Arduino IDE, and the chip is even limited to 40 MHz when using an external clock.
The fastest and most satisfying solution to upgrade your Arduino project is to use the most advanced line of 644/1284 MCUs since Arduino was developed based on Atmega 8-bit chips. Atmega644 and Atmega1284 MCUs provide you with many more resources while maintaining total compatibility, thanks to the MightyCore.
644 Narrow and 1284 Narrow
These boards are designed to be closely related to the Nano board. So even though they are a little more significant (+2.7mm) and longer (+8 mm), they will fit perfectly on a test breadboard.
Advantages
- Instant upgrade, 100% compatible with your Arduino project.
- Ten more digital IOs than on an Uno / Nano.
- Much more flash and RAM.
- The entire EEPROM offers 10x the durability of emulated EEPROM.
- Small footprint.
- Low power consumption.
- Lower cost than a Mega2560
- Can be fitted with a 0.49″ OLED in option
Optional OLED
One of the main reasons to increase memory resources is for use with newer OLED and TFT displays. Since many users may wish to include some visual rendering or rich graphic content when using these boards, they come with a specialized port (GND, 5V, SCL, SDA) for OLED modules with an I²C interface. An optional 0.49″ OLED is also available, which can fit perfectly above the host board without the need to cable anything or consume any more surface area.
Only logged in customers who have purchased this product may leave a review.
Shipping Policy
Fast Delivery! We ship via USPS, UPS, DHL, or FedEx because they're fast, reliable, and easy to track. We process orders within 24 hours, and delivery may take 4-7 working days, depending on your location. We'll email you the tracking info once we ship your order. We sell in USD.
Shipping Costs: For some products, such as heavy wheels and CNC machines, we calculate shipping costs by weight rather than quantity. To reduce shipping costs for orders with multiple items, please contact us before placing your order.
Tariff:Â To minimize or avoid tariffs, we ship from the country where the product is made, such as China, Italy, or Taiwan, Europe, etc. We're here to help you buy the hottest products affordably, with fast shipping and World-Class Customer Support. However, please review the tariff and other policies on this page carefully before making a purchase.
Ships From: On this product page, check the Ships From: label to see which country the product ships from. We do not ship all products from the USA (except for products made in the USA or in stock), and we ship some products from regions such as China, Taiwan, Canada, and Europe. Therefore, the tariff you pay depends on the country of origin, as not all countries charge the same rate. For example, suppose the US imposes a 30% tariff on goods imported from China; in contrast, other countries may impose a lower tariff, or even none at all, on goods shipped from China into their countries.
If applicable, you will pay the tariff in your country. The total amount of your order does not include a tariff, which you'll pay before the delivery. We will not issue a refund if you don't pay the tariff.
Tariff vs. Shipping Fee: Please don't confuse the shipping fee with the tariff, because they are two separate charges. You pay us a shipping fee for the carrier to deliver your order to your door. You pay the tariff to the customs office, a branch of your government, as an import tax.
Why aren't we adding tariffs to the product's retail price? If all countries imposed the same tariff amount and used the same currency, we would have added that tariff to the product's retail price. Our suppliers and we are not responsible for tariffs. Please shop accordingly.
Attention! We will email you the tracking number so you can follow your parcel. The shipping company will contact you by phone, text, or email to arrange payment of the tariff. However, as the customer, you are responsible for responding to their calls, texts, or emails. You can also use the tracking number link we emailed you to contact the shipping company and pay any applicable tariffs, if you haven't already.
Heads Up! We're not responsible if the shipping company returns your parcel to the country of origin due to the unpaid tariff or non-compliance with its requirements. As a result, you will be responsible for reshipping costs and applicable tariffs. We will not accept any excuses for failing to follow up with the shipping company regarding the tariff, and we will not issue a refund.
Please check your SPAM folder! To provide you with delivery information, we will add your email address to the shipping website so you are notified of delivery until your parcel reaches your shipping address. Please always check your spam folder to ensure you receive emails from OzRobotics.com, USPS, UPS, DHL, and FedEx. Please let us know if you don't want us to enter your email address on the shipping company website.
Return Policy
5 Hours: Mistakes happen when ordering, so you have 5 hours to request a refund for any reason, including if you don't want to pay the tariff. However, Stripe will not refund you their processing fee if you cancel your order.
All Sales Are Final: After 5 hours, we cannot cancel your order or issue a refund, as order cancellations incur multiple transaction processing fees from Stripe and PayPal, additional shipping fees, and reverse tariff payments, which are costly and time-consuming. For technical issues, we'll assist you in resolving problems and provide a replacement if you can prove that the product has a manufacturing defect.
Exchange Policy: We want you to be happy with your new purchase. However, once you have used the product, we cannot issue a refund. However, we will offer an exchange for a product with irreversible manufacturing defects or technical issues. If you purchased the wrong product, then you will be responsible for the re-shipping fees and tariffs. If the product you purchased is defective, email us ASAP with photos or a video of the faulty part so we can evaluate the issue before arranging a replacement.
Privacy Policy
Oz Robotics does not collect personal data from customers or visitors; it collects only the data shown on the user profile screen for registered users.
Terms and Conditions
If you were not at home or at your shipping address during the parcel delivery: It is not our or the supplier's fault; if the shipping/delivery company could not deliver your parcel because you, the customer, were not at home or at your delivery address on the delivery date/time, and as a result, the carrier returned your parcel to the manufacturer from where it was shipped. Please note that we do not accept excuses; you will have to pay the re-shipping fee and the tariff for any re-shipment request. In such a case, we will not issue a refund.
Product Warranty: Our warranty covers only product-related problems caused by manufacturing defects. It does not cover problems resulting from faulty repair attempts, customer accidents, or misuse.
Reviews
There are no reviews yet.