Magnetic and Electric Field Modeling Software – EMS Electromagnetic Simulation

$35,999.00

Accurate, Powerful, Easy-to-use – The ultimate workbench to test your design ideas

EMS is a Gold Certified Add-in to SOLIDWORKS® and an Add-in to Autodesk® Inventor® which enables you to simulate the most intricate electrical machines, motors, generators, sensors, transformers, high voltage apparatus, high power machines, electrical switches, valves, actuators, PCB’s, levitation machines, loudspeakers, permanent magnet machines, NDT equipment, inverters, converters, bus bars, inductors, bushings, or biomedical equipment.

With built-in thermal, motion, and structural simulation.

Supplier: EMWorks SKU: EPN-L- 1 Categories: , Tags: , More From:

Magnetic and Electric Field Modeling Software – EMS Electromagnetic Simulation

EMS is an electromagnetic field simulation software that calculates fields (electric/magnetic / flux / potential / eddy currents), circuit parameters (inductance/capacitance/resistance/impedance/flux linkage), mechanical parameters (force/torque), and losses (eddy/core/hysteresis/ohmic).

 

EMS is a Gold Certified Add-in to SOLIDWORKS® and an Add-in to Autodesk® Inventor® which enables you to simulate the most intricate electrical machines, motors, generators, sensors, transformers, high voltage apparatus, high power machines, electrical switches, valves, actuators, PCB’s, levitation machines, loudspeakers, permanent magnet machines, NDT equipment, inverters, converters, bus bars, inductors, bushings, or biomedical equipment.

Main Features and capabilities

Full 3D electromagnetic field simulation: EMS enables you to do electric and magnetic simulations using your complete 3D geometry to ensure your designs’ 100% accuracy and integrity. EMS also allows you to do 2D planar and axis-symmetry simulations for designs where such simplification yields significantly reduced time for a solution with no compromise on accuracy.

Seamless integration with CAD geometry: EMS seamless integration in the two leading CAD platforms – SOLIDWORKS and Autodesk® Inventor® empowers you to simulate the most intricate electromagnetic designs. You don’t need to “reinvent the wheel” acquire a CAD model from the mechanical drafting personnel and instantly start your electric or magnetic simulation without any modification.

Parametric simulation: EMS enables numerous What if? Analyses to obtain the best design for your application. Any CAD dimension or a simulation variable can be set as a parameter to study the effect of its changes on your design. This serves as a first step to optimizing your designs.

Multiphysics capabilities: EMS is an accurate multiphysics software that enables you to couple your magnetic and electrical design to Circuit, Motion, Thermal, and Structural analyses on the same model in a hassle-free integrated environment without any need to import/export any data. This integrated multiphysics environment brings user efficiency, accuracy, and productivity.

User-friendly interface and embedded learning materials: It is an easy-to-use program with a very short learning curve. Follows the same philosophy of your CAD software. The demo viewer feature in the software gives you access to numerous training materials for fast learning and adoption of EMS.

FEATURES

A Transformer Software and a Calculator
EMS can be used as a transformer design software. EMS can be used to study critical transformer design parameters, including virtually

Energy storage
A transformer shall not store energy but transfer instantaneously from input to output. Unfortunately, in real life, transformers store some undesired energy. EMS computes the leakage inductance representing the stored energy between windings regions occupied by non-magnetic media. Similarly, EMS calculates the mutual inductance, indicating the amount of undesired stored energy in the magnetic core and small air gaps.

Losses and thermal management
EMS can calculate the maximum “hot spot” temperature rise at the core surface inside the center of the winding. This calculation helps determine the smallest core size that meets the required power supply efficiency without exceeding the maximum “hot spot” temperature. To calculate the temperature rise, EMS considers all transformer losses, including eddy loss, hysteresis loss, core loss, winding loss, heat loss, and the surrounding liquid temperature and convection properties.

Core selection
EMS calculates the magnetic flux density and saturation levels in the core, which can help select the proper core material, shape, and size for any frequency and desired power output. The transformer’s designer ultimately aims to choose a shape that is easy to manufacture, as small of a core size as possible, and the least expensive core material while respecting the required power without saturating the core.

Open and short-circuit tests.
Open and short circuit tests of a transformer are critical but costly and time-consuming. EMS enables the designer to run these tests accurately and efficiently virtually.

Insulation coordination
EMS calculates the dielectric breakdown, which is instrumental in selecting the proper bushings, surge arrestors, and other insulating infrastructure. This type of calculation helps the designer meet the various insulation coordination standards.

Short-circuit forces
EMS calculates the magnetic force acting on the windings and the core material and the stress and structural displacement due to these forces. This type of calculation helps guarantee the structural integrity of the transformer.

A Motor Software and a Calculator
EMS can be used as motor design software and can be used to study critical electric motor design parameters, including virtually

Parameters estimation
Winding inductance and resistance play a significant role in electrical motors’ control and state estimation. An example would be phase current control in an SRM motor or rotor position estimation in a sensor-less BLDC. EMS can determine these parameter values for a desired frequency set and current conditions.

3D modeling problems

  • EMS is a complete 3D modeling platform. This enables the simulation of some important topologies and effects which are otherwise impossible to analyze:
  • Skewing of slots or rotor poles is a common technique for cogging force reduction. Its results can be estimated only if the interaction between the stator and rotor is captured in all three dimensions.
  • Advanced machine topologies such as axial and transverse flux machines inherently operate with 3D flux distribution and should be treated as such.
  • End windings have a significant effect on the winding resistance, as well as its leakage inductance.

Torque
EMS can compute transient and steady-state torque profiles for various electrical machine topologies such as Permanent magnet AC machine, BLDC, Switched Reluctance, Induction, etc. Torque results for different rotor RPMs and winding currents determine the optimal operating conditions. Furthermore, EMS helps minimize the cogging torque by comparing its magnitude for different air gap lengths or fractional slot pitches.

Core material
Successful machine design depends on accurately representing nonlinear phenomena in the core material, such as flux saturation, eddy current, and hysteresis losses. EMS comes with a library of predefined solid and laminated core materials. The designer can easily compare materials regarding saturation, core losses, and overall efficiency. Core and winding loss results can be coupled with EMS’s thermal solver and determine temperature rise and cooling requirements.

Shape and sizing
Machine radius, length, and the number of poles will significantly determine its torque and power rating. However, finer geometrical features of the magnetic circuit profoundly affect machine performance. For example, the shape of squirrel cage bars in an Induction motor will affect how torque changes with the rotor slip. All these parameters can be readily varied inside EMS to evaluate their effect on the performance of the motor.

Parasitic RLC Extraction
EMS can be used as a parasitic RLC extractor. That is, it accurately calculates the resistance, the inductance, and the capacitance for any arbitrary 3D electric and electronics structure. These calculations consider the proximity effect, the skin effect, the dielectric and ohmic loss, and the frequency dependence. In other words, both DC and AC parasitic RLC are calculated. These parasitic values are instrumental in modeling various electric and electronic devices and circuits, including:

High-speed electronics
RLC models for high-speed electronic devices such as ICs, PCBs, packages, and on-chip passive components are crucial in studying crosstalk and distortion, interconnect delays and ringing, and ground bounce.

Power converters
RLC models are helpful in simulating power electronic equipment such as bus bars, cables, inverters, and converters commonly found in power distribution applications and hybrid and electric vehicles.

Touchscreen modeling
The modeling of touchscreens found in today’s smartphones and computers heavily depends on the accurate calculation of the capacitance of the screen wires.

NDT simulation software
Electromagnetic fields and waves are widely used in non-destructive testing technologies. Because EMS accurately calculates the magnetic flux and eddy current, it covers a wide varies of electromagnetic NDT techniques, including eddy-current testing (ECT), magnetic flux leakage (MFL), remote field testing (RFT), magnetic particle inspection (MPI), pulses eddy current (PEC), and the alternating current field measurement (ACFM). NDT screening commonly involves the movement of the NDT probes. EMS is well-suited to model this type of motion since EMS couples to Solidworks Motion.

Solidworks and Autodesk Inventor Seamless Integration
EMS seamless integration in the three leading CAD platforms empowers you to simulate the most intricate electrical machine, motor, generator, sensor, transformer, high voltage apparatus, high power machine, electrical switch, valve, actuator, PCB, levitation machine, loudspeaker, permanent magnet machine, NDT equipment, inverter, converter, bus bar, inductor, bushings, or biomedical equipment. You don’t need to “reinvent the wheel,” acquire a CAD model from the mechanical drafting personnel, and start your magnet or magnetic simulation instantly without any modification. If you wish to modify the acquired CAD model, you won’t need to return to the drafting personnel because commercial CAD packages such as Solidworks are parametric and hierarchical. Change it yourself “on the fly”. If the drafting department or colleague uses a different CAD package, they can save it for you in Parasolid, ACIS, IGES, STEP, STL, CATIA, or ProE kernel. Then, import it into SOLIDWORKS®, Autodesk® Inventor®, or Ansys SpaceClaim and continue your electromagnetic design.

Multiphysics Capabilities
EMS is an accurate multiphysics software and simulation package. It enables you to couple your magnet, magnetic, and electrical design to Thermal, Structural, and Motion analyses on the same model and mesh in a hassle-free integrated environment without any need to import or export any data. This integrated multiphysics environment means no cluttering, jumping around, mishmash, chaos, confusion, and mess. It also means efficiency, accuracy, and productivity.

Electro-Thermal Analysis
Does your design involve electro-thermal aspects? Easy and hands-free! Just check “Couple to thermal” steady-state or transient in the study properties. EMS automatically computes the joule, eddy, and core losses and feeds them into the thermal solver. You may readily add non-electromagnetic heat loadings by applying volume heat, heat flux, or fixed temperature. Considering the environmental conditions such as convection and radiation, EMS thermal steady-state or transient computes the temperature, temperature gradient, and heat flux and saves them to the “Thermal Results” folder.

Electro-Structural Analysis
The electro-mechanical coupling is also easy and hands-free. The “Couple to structural” option invokes the EMS structural solver after transferring the local force distribution in relevant parts in addition to the mechanical loads and constraints and then computing the displacements. The stress and strain are subsequently deduced and added to the “Structural Results” folder. If the more general electro-thermo-mechanical coupling is desired, EMS transfers thermal and structural loads to the Thermal and Structural solvers. The Thermal solver, in turn, feeds the thermal loads to the Structural solver, which computes the final displacements that reflect both the electromagnetic and the thermal loads while considering the magnetic, electrical, thermal, and structural environments.

Solidworks Motion integration
Electrical machines and drives usually encompass moving parts and components. Generally speaking, the resulting motion is rotational, such as motors, or translational, such as linear actuators. Nevertheless, some applications, such as MagLev and Eddy’s current braking, may provoke all the motion six degrees of freedom. In such cases, only EMS can handle such intricate machines and equipment. Why? Because of EMS, it couples to the most versatile and powerful mechanical motion package, Solidworks Motion®. To find out more about this robust package, please visit https://www.solidworks.com/sw/products/simulation/motion-analysis.htm. The coupling to SolidWorks Motion® is again hassle-free. After creating a SolidWorks Motion® study, instruct EMS to couple to it. That is it, and that is all.

Grabcad, 3dcontencentral, trace parts
In recent years, millions of free 3D CAD models have become available in CAD depositories such as grabcad.com, www.3dcontentcentral.com, and www.traceparts.com. Consequently, you can grab a CAD model from the depositories, make necessary changes, and instantly start your finite element analysis.

EMS Results

EMS empowers you, the designer, to compute electric, magnetic, mechanical, and thermal parameters, including:
Electric Force
Electric Torque
Magnetic Force
Magnetic Torque
Electromagnetic Force
Electromagnetic Torque
Magnetic Flux Density
Magnetic Field
Electric Field
Electric Flux
Current Flow
Eddy Current
Inductance
Capacitance
Resistance
Hysteresis loss
Eddy loss
Speed
Acceleration
Stress
Flux Linkage
Core Loss
Breakdown Voltage
Lorentz Force
Lorentz Torque
Skin effect
Proximity effect
Magnetic Saturation
Induced Voltage
Force Density
Power Loss
Temperature
Temperature Gradient
Heat Flux
Back EMF
Electric flux density
Impedance
Ohmic loss
Displacement
Strain

Product Datasheet and Manual

If applicable, the Product Documentation such as Datasheet, Brochure, Reference Materials, CAD Design, STP Files, Manuals, and Tutorials will be available for download upon purchase from the My Account as needed. On the checkout page, please create an account to download product-related files upon purchase. You won’t be able to download otherwise.


Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

The developer of electromagnetic simulation software in 3 d and 2 d. It is a finite element software that provides analysis capabilities for both low frequency and high frequency, RF, and Microwave analysis.
Our EMS solves application like transformers, solenoids, magnet arrays, and more
Our HFWorks solves application like antenna, waveguides, RF filters, and more
Our Motowizard solves motor analysis based on a set of motor templates
Our 2d comes standard with our 3d EMS software
Our Transformer Wizard solves all type of transformers based on a set of templates

Shipping Policy

Please check your SPAM folder to ensure you accept emails from OzRobotics.com to receive your tracking number and download product-related files.

WE SHIP WORLDWIDE: We primarily ship via FedEx, UPS, DHL, and USPS because they’re reliable, fast, and easily trackable. We usually ship within two to three business days after the full payment. Standard delivery generally occurs within 5 to 7 business days after the shipping date. However, the delivery may take about 7 to 10 business days, depending on the shipping destination, logistics, weather conditions, product weight, size, or shipping company distribution structures.

SHIPPING COSTS: For some industrial products, e.g., heavy wheels, CNC machines, etc., the shipping cost is calculated based on the product weight, not quantity. To benefit from lower shipping costs for orders with multiple items, please contact us at sales@ozrobotics.com. Our shipping rates are listed clearly on each product page under the SHIPPING tab. Additionally, to see the shipping cost for your country, add the item to the Shopping Cart; you will see the shipping cost based on your Country and Location.

CUSTOMS and TARIFFS: While not all products require a tariff, some products may require a minimal tariff if applicable in your country. The total amount for your order does not include a customs fee/tariff. A tariff belongs to the buyer when applicable. Why don't we add tariffs to the product's retail price? - If all countries deducted the same tariff amount, we would have added the tariff amount to the product price. However, we do not do that because each country charges a different amount, while some do not even charge. Therefore, we can't add any tariff to the product's retail pricing. Oz Robotics, manufacturing partners, or Suppliers are not responsible for tariffs. Please check the "Made In:" and "Brand:" labels on the product page to see the product's origin. The total amount for your order does not include any duties, import taxes, customs fees, and GST/VAT. The buyer must pay all import duties. If you choose not to pay the tariff and parcel returns, there will not be any refund. Please click here to see more on Tariffs.

Return Policy

WITHIN 5 HOURS: Mistakes happen when ordering, so you have 5 hours to request an order cancellation, but even within 5 Hours, we still cannot refund the PayPal or Stripe Processing fee because they do not refund us. After 5 hours, your order has either been shipped, prepared to ship, or custom-made. Therefore, we cannot accept your cancellation request after this period has passed.

AFTER 5 HOURS: If you want to cancel your order after 5 Hours, we will deduct 30% of the total for restocking + PayPal or Stripe processing fees and the Return Shipping cost for unopened packages.

AFTER RECEIVING YOUR ORDER: If you decide not to keep your order after it arrives, we will deduct 70% of the total + the shipping fee if we find it refundable after a review. Please see our Refund and Replacement Policy

EXCHANGE POLICY: Oz Robotics wants you to be happy with your new purchase. However, we abide by the exchange policy of our suppliers because we do not manufacture these products; our suppliers do. Once you use the product, our supplier(s) and we have the right not to issue a refund. Still, we will offer an exchange for wrongly purchased items or products with serious and irreversible defects or technical problem(s). The buyer will pay the shipping fee for wrongly purchased products or similar issues. If the product you purchased is defective, please email us at support@ozrobotics.com with photos or a video of the defective parts to evaluate before you send it. Click HERE for more on Refund and Replacement Policy

REFUND POLICY: Oz Robotics accepts refunds on a minimal basis unless there is a manufacturing defect. For electronic items, returns are only accepted on devices with serious and irreversible problems; meanwhile, the customer must apply for the returns within seven days of delivery. Before a refund acceptance, please include images or a video and any other proof of the defect. However, we abide by the exchange policy of our suppliers because we do not manufacture these products. For more info please visit Refund and Replacement Policy.

Other than our supplier's default policy, once a return is agreed upon, you can ship your defective item to the provided return address that you should receive from us first. Please ship the order in original packaging with all the accessories and additional parts. If the Required Parts are not sent back, they will be billed for or expected to be shipped later. And only once all items have arrived will our staff check the returned product for testing. Include in your package a signed letter stating the reason for your return, the original receipt, proof of defect, images, a video, etc. It will help us to speed up the process on your behalf.

The purchaser (customer/buyer) is responsible for all shipping costs when returning an item. However, upon receiving the returned order, we will assess the product. If it is determined that there is, in fact, a manufacturing defect, then we will refund the shipping costs as well as repair or replace or refund the full amount to the purchaser if the product is not fixable.

If you wish to return an unused product, please do so within seven days from the ship date for a refund on the purchase price minus shipping and handling. Refunds will be credited to the original credit card used for payment 24-48 HOURS after receiving the product back. We will charge a 30% of the total for restocking + PayPal or Stripe processing fees and the Return Shipping cost for unopened packages.

Once your return is received and inspected, and if you agree to a refund, refunds will be credited to the original credit card used for payment in 24-48 hours. Please note that we will charge a 70% restocking fee once you return a product without any defect.

Once your refund is processed, PayPal will return the money to the card used. It may take at least five business days (depending on the bank and credit company) before your refund is posted in your bank account and statements. Contact Us if you have not received your refund after five business days.

Do not return your product to our New York office. For any exchange or refunds, please email us first at support@ozrobotics.com for us to provide you with the steps that need to be followed. Any product you return must be in the same condition you received and returned in the original packaging without being used. Please keep the original receipt. More on Refund and Replacement Policy.

Become A Supplier and Sell your Products with Oz Robotics.

Our customers always search for more tech products to use or build excellent innovations to meet the global demand. If you are a manufacturer, supplier, or startup with excellent products, partner with us today. Sell your Hardware, Software, Tech Books, and Tech Services to millions of customers worldwide with Oz Robotics to increase your sales and exposure. Contact Us Now!