RF Star Flash RF Module with PA and IPEX Connectors


  • Protocols: Thread, Zigbee®, Matter, Bluetooth® 5.3 Low Energy, IEEE 802.15.4g, IPv6-enabled smart objects, (6LoWPAN), MIOTY®, Wireless M-Bus, Wi-SUN®, KNX RF, Amazon Sidewalk, proprietary systems, SimpleLink™ TI 15.4-Stack (Sub-1 GHz)
  • Package (mm): 26.5 × 16.9 × 2.1, Half-hole ANT interface, IPEX connector, 1.27 pitch, 38-pin
  • Features: Bluetooth 5.2 Low Energy, ZigBee, Thread, Matter, SimpleLink™ TI 15.4-Stack (2.4 GHz)
  • GPIO: 24
  • Max. TX Power: + 20 dBm(Sub-1G), + 5 dBm(2.4G)

RF Star CC1352P7 868MHz 915MHz 2.4GHz 704KB Flash RF Module with PA and IPEX Connectors

RF-TI1352P2 is an RF module based on TI SoC CC1352P7 with an integrated power amplifier. It integrates a 48 MHz and a 32.768 kHz crystal, a 256 KB ROM, a 704 KB Flash, IPEX connectors, and half-hole RF output pins of different radio frequencies to guarantee the external antenna connection. Its ARM® Cortex®-M4F core application processor is optimized for long-range and low-power. It features a small size, robust connection distance, and rigid reliability.

The multi-band module supports multiprotocol for both Sub-1 GHz and 2.4 GHz through a DMM driver for Thread, Zigbee®, Matter, Bluetooth® 5.3 Low Energy, IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), MIOTY®, proprietary systems, including the TI 15.4-Stack (Sub-1 GHz and 2.4 GHz). It has a 1.27-mm pitch stamp stick package for easy assembly and cost-effective PCB design.

  • Wireless SoC: 48 MHz ARM® Cortex®-M4F processor
  • TX power: Up to +20 dBm


  • -121 dBm @ Sub-1 GHz (Long-range Mode)
  • -110 dBm @ Sub-1 GHz (50 kbps)
  • -104 dBm @ Sub-1 GHz (100 kbps)
  • -97 dBm @ Bluetooth 5.0 (1 Mbps)
  • -92 dBm @ Bluetooth 5.0 (2 Mbps)
  • -104 dBm @ Bluetooth 5.0 (125 kbps LE Coded PHY)


  • 704 KB of in-system programmable flash
  • 256 KB of ROM for Protocols and library functions
  • 8 KB of cache SRAM
  • 80 KB of ultra-low leakage SRAM


  • Bluetooth 5.2 Low Energy
  • ZigBee, Thread, Matter
  • IEEE 802.15.4
  • IPv6-enabled smart objects (6LoWPAN)
  • MIOTY®
  • Wireless M-Bus
  • Wi-SUN®
  • KNX RF
  • Amazon Sidewalk
  • Proprietary systems
  • SimpleLink™ TI 15.4-Stack (2.4 GHz)
  • Dynamic Multiprotocol Manager (DDM) driver

Operating Range

  • Supply voltage range: 1.8 V ~ 3.8 V
  • Operating Temperature: -40 °C ~ +85 °C

Rich Peripherals

  • ADC
  • DAC
  • UART
  • SPI
  • I2C
  • I2S
  • RTC


  • Building security systems – motion detector, electronic smart lock, door and window sensor, garage door system, gateway
  • HVAC – thermostat, wireless environmental sensor, HVAC system controller, gateway
  • Fire safety system – smoke and heat detector, fire alarm control panel (FACP)
  • Video surveillance – IP network camera
  • Elevators and escalators – elevator main control panel for elevators and escalators
  • Smart meters – water meter, gas meter, electricity meter, and heat cost allocators
  • Grid communications – wireless communications – Long-range sensor applications
  • Other alternative energy – energy harvesting
  • Industrial transport – asset tracking
  • Factory automation and control
  • Medical
  • Electronic point of sale (EPOS) – Electronic Shelf Label (ESL)
  • Wired networking – wireless LAN or Wi-Fi access points, edge router
  • Portable electronics – RF smart remote control
  • Home theater & entertainment – smart speakers, smart display, set-top box
  • Connected peripherals – consumer wireless module, pointing devices, keyboards and keypads
  • Gaming – electronic and robotic toys
  • Wearables (non-medical) – smart trackers, smart clothing

Additional information

Weight 1.1 lbs
Dimensions 26.5 × 16.9 × 2.1 in

Product Datasheet and Manual

If applicable, the Product Documentation such as Datasheet, Brochure, Reference Materials, CAD Design, STP Files, Manuals, and Tutorials will be available for download upon purchase from the My Account as needed. On the checkout page, please create an account to download product-related files upon purchase. You won’t be able to download otherwise.


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

RF-star) is a leading global provider of wireless communication modules and solutions, specializing in low-power modules for IoT, industrial, automotive, and consumer applications. With over a decade of engagement in Bluetooth and IoT communication technology and extensive expertise, we are capable of bringing reliable, convenient, secure and intelligent connectivity service to every industry, enriching smart life with a perfect wireless experience.

Shipping Policy

Please check your SPAM folder to ensure you accept emails from OzRobotics.com to receive your tracking number and download product-related files.

WE SHIP WORLDWIDE: We primarily ship via FedEx, UPS, DHL, and USPS because they’re reliable, fast, and easily trackable. We usually ship within two to three business days after the full payment. Standard delivery generally occurs within 5 to 7 business days after the shipping date. However, the delivery may take about 7 to 10 business days, depending on the shipping destination, logistics, weather conditions, product weight, size, or shipping company distribution structures.

SHIPPING COSTS: For some industrial products, e.g., heavy wheels, CNC machines, etc., the shipping cost is calculated based on the product weight, not quantity. To benefit from lower shipping costs for orders with multiple items, please contact us at sales@ozrobotics.com. Our shipping rates are listed clearly on each product page under the SHIPPING tab. Additionally, to see the shipping cost for your country, add the item to the Shopping Cart; you will see the shipping cost based on your Country and Location.

CUSTOMS and TARIFFS: While not all products require a tariff, some products may require a minimal tariff if applicable in your country. The total amount for your order does not include a customs fee/tariff. A tariff belongs to the buyer when applicable. Why don't we add tariffs to the product's retail price? - If all countries deducted the same tariff amount, we would have added the tariff amount to the product price. However, we do not do that because each country charges a different amount, while some do not even charge. Therefore, we can't add any tariff to the product's retail pricing. Oz Robotics, manufacturing partners, or Suppliers are not responsible for tariffs. Please check the "Made In:" and "Brand:" labels on the product page to see the product's origin. The total amount for your order does not include any duties, import taxes, customs fees, and GST/VAT. The buyer must pay all import duties. If you choose not to pay the tariff and parcel returns, there will not be any refund. Please click here to see more on Tariffs.

Return Policy

WITHIN 5 HOURS: Mistakes happen when ordering, so you have 5 hours to request an order cancellation, but even within 5 Hours, we still cannot refund the PayPal or Stripe Processing fee because they do not refund us. After 5 hours, your order has either been shipped, prepared to ship, or custom-made. Therefore, we cannot accept your cancellation request after this period has passed.

AFTER 5 HOURS: If you want to cancel your order after 5 Hours, we will deduct 30% of the total for restocking + PayPal or Stripe processing fees and the Return Shipping cost for unopened packages.

AFTER RECEIVING YOUR ORDER: If you decide not to keep your order after it arrives, we will deduct 70% of the total + the shipping fee if we find it refundable after a review. Please see our Refund and Replacement Policy

EXCHANGE POLICY: Oz Robotics wants you to be happy with your new purchase. However, we abide by the exchange policy of our suppliers because we do not manufacture these products; our suppliers do. Once you use the product, our supplier(s) and we have the right not to issue a refund. Still, we will offer an exchange for wrongly purchased items or products with serious and irreversible defects or technical problem(s). The buyer will pay the shipping fee for wrongly purchased products or similar issues. If the product you purchased is defective, please email us at support@ozrobotics.com with photos or a video of the defective parts to evaluate before you send it. Click HERE for more on Refund and Replacement Policy

REFUND POLICY: Oz Robotics accepts refunds on a minimal basis unless there is a manufacturing defect. For electronic items, returns are only accepted on devices with serious and irreversible problems; meanwhile, the customer must apply for the returns within seven days of delivery. Before a refund acceptance, please include images or a video and any other proof of the defect. However, we abide by the exchange policy of our suppliers because we do not manufacture these products. For more info please visit Refund and Replacement Policy.

Other than our supplier's default policy, once a return is agreed upon, you can ship your defective item to the provided return address that you should receive from us first. Please ship the order in original packaging with all the accessories and additional parts. If the Required Parts are not sent back, they will be billed for or expected to be shipped later. And only once all items have arrived will our staff check the returned product for testing. Include in your package a signed letter stating the reason for your return, the original receipt, proof of defect, images, a video, etc. It will help us to speed up the process on your behalf.

The purchaser (customer/buyer) is responsible for all shipping costs when returning an item. However, upon receiving the returned order, we will assess the product. If it is determined that there is, in fact, a manufacturing defect, then we will refund the shipping costs as well as repair or replace or refund the full amount to the purchaser if the product is not fixable.

If you wish to return an unused product, please do so within seven days from the ship date for a refund on the purchase price minus shipping and handling. Refunds will be credited to the original credit card used for payment 24-48 HOURS after receiving the product back. We will charge a 30% of the total for restocking + PayPal or Stripe processing fees and the Return Shipping cost for unopened packages.

Once your return is received and inspected, and if you agree to a refund, refunds will be credited to the original credit card used for payment in 24-48 hours. Please note that we will charge a 70% restocking fee once you return a product without any defect.

Once your refund is processed, PayPal will return the money to the card used. It may take at least five business days (depending on the bank and credit company) before your refund is posted in your bank account and statements. Contact Us if you have not received your refund after five business days.

Do not return your product to our New York office. For any exchange or refunds, please email us first at support@ozrobotics.com for us to provide you with the steps that need to be followed. Any product you return must be in the same condition you received and returned in the original packaging without being used. Please keep the original receipt. More on Refund and Replacement Policy.

Shipping costs

Region / Country State Postcode Cost
Asia Any Any $36.00
Europe Any Any $57.00
North America Any Any $42.00
Australia Any Any $48.00
South America Any Any $57.00