ATmega1284 Development Board with 5V and 3.3V Fast-Mode I2C Interfaces and Power

Price range: $69.00 through $89.00

The pt1-ATmega1284-5V33V is a robust, fully-featured ATmega1284 development board built on through-hole components. Its main feature is a fast-mode I2C interface that supports 5V and 3.3V devices at the same time. Two on-board regulators provide both voltages.

ATmega1284 Development Board with 5V and 3.3V Fast-Mode I2C Interfaces and Power

The pt1-ATmega1284-5V33V is a robust, fully-featured ATmega1284 development board built on through-hole components. Its main feature is a fast-mode I2C interface that supports 5V and 3.3V devices at the same time. Two on-board regulators provide both voltages. Apart from the two main connectors making the full range of MCU pins available, the board also features individual connectors for I2C at 5V and 3.3V, power at 5V and 3.3V, and ISP and UART. The latter two allow the board to be connected to a computer for programming, monitoring, and debugging with minimum wiring and hassle. External power can be provided through the 5.5mm power jack or directly from an external 5V source.

 

Features

  • development board supporting ATmega1284, ATmega644, ATmega324, ATmega164 in DIP package (ATmega1284 pre-fitted in socket)
  • MCU slightly overclocked using a 22.1 MHz crystal
  • fast-mode I2C at 5V and 3.3 V (deploying a PCA9306 voltage-level translator)
  • two high-power LM1084IT LDO regulators providing 5V and 3.3V
  • each power circuit has its indicator LED
  • connectors: all MCU pins, I2C @5V, I2C @3.3V, ISP, UART, 5V power, 3.3V power
  • power in: 7-25V, or 5V directly
  • RESET button
  • all based on robust through-hole components (except for the PCA9306 voltage-level translator)
  • the board is standing on four brass standoffs, allowing you to place it on a working table or integrate it into a larger assembly
  • board size: 106.75×56.50mm; bolts: 98.25×47.25mm (M3)
  • high-quality PCBs designed in KiCad and produced by Aisler (Germany), PCBWay (China), and OSH Park (USA)
  • board comes fully assembled and tested
  • power cable included

Usage and Testing

I’ve developed this board to connect my ATmega-based systems to the Internet using an ESP8266 IC (which runs only at 3.3V) over the I2C bus. Even though the ATmega ICs can run at 3.3V, they cannot do so at higher clock speeds. I’ve been using these ATmega1284 ICs in slightly overclocked setups using a 22.1 MHz crystal without any issues.

Note: the linear power regulators on this board perform the best (i.e., generate the least heat) when the power supply voltage is slightly higher than 5V (but at least 6.5V is required to bridge the drop-out voltage). A multi-voltage multi-connector power adapter (preset to 7.5V) is available for this board.

Suppose you prefer to use an external regulated/switched 5V power supply that you may have already available. In that case, a separate connector and switch on the board allow you to bypass the built-in regulators. The 5V power supplied through the USB port over the ISP/UART connection will be sufficient for basic applications.

  • All boards have been tested successfully before shipping in a setup connected to a 3.3V ESP8266 board.
  • An original Wemos/Lolin D1 mini-pro board (featuring an ESP8266) is an option for this board.

Additional information

Options

add a multi-connector, multi-voltage power supply (Euro plug), add a power supply and a Wemos/Lolin D1 mini (Pro) board, add an original Wemos/Lolin D1 mini (Pro) board, no additional options

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shipping Policy

We ship directly from the country where the product is made, such as China, Italy, or Taiwan, helping you avoid or pay lower tariffs.

Fast Delivery! We ship via FedEx, UPS, DHL, and USPS because they are fast, reliable, and easily trackable. We process orders within 24 hours, and delivery may take 4-7 days, depending on your location. We will email you the tracking number once your order is shipped. Our prices are in US dollars.

Shipping Costs: For some industrial products, such as heavy wheels and CNC machines, shipping costs are calculated based on product weight rather than quantity. To reduce shipping costs for orders with multiple items, please email us at sales@ozrobotics.com before placing your order. We show shipping rates on the product page under the SHIPPING tab. To view the shipping cost for your country, click 'Add to Cart' on the product page.

Return Policy

5 Hours: Mistakes happen when ordering, so you have 5 hours to request a refund for any reason, including if you don’t want to pay the tariff. However, Stripe will not refund you their processing fee if you cancel your order.

All Sales Are Final: After 5 hours, we cannot cancel your order or issue a refund because order cancellations require reverse tariff payments and multiple shipping fees, which are very costly and time-consuming. For technical issues, we will be happy to assist you in resolving problems and provide a replacement if you can prove that the product has a manufacturing defect.

Exchange Policy: We want you to be happy with your new purchase. However, once you have used the product, we cannot issue a refund. However, we will offer an exchange for a product with irreversible manufacturing defects or technical issues. If you purchased the wrong product, then you, as the customer, will be responsible for the re-shipping fees and tariffs. If the product you purchased is defective, email us at support@ozrobotics.com with photos or a video of the faulty parts so we can evaluate the issue before arranging a replacement.

Shipping costs

Method Name Region / Country State Postcode Cost
Vendor Shipping Netherlands Any Any $8.00
Vendor Shipping Belgium Any Any $13.00
Vendor Shipping France Any Any $13.00
Vendor Shipping Sweden Any Any $13.00
Vendor Shipping Austria Any Any $13.00
Vendor Shipping Germany Any Any $13.00
Vendor Shipping Spain Any Any $13.00
Vendor Shipping Italy Any Any $13.00
Vendor Shipping Luxembourg Any Any $13.00
Vendor Shipping Denmark Any Any $13.00
Vendor Shipping Portugal Any Any $15.00
Vendor Shipping Ireland Any Any $15.00
Vendor Shipping United Kingdom (UK) Any Any $15.00
Vendor Shipping Europe Any Any $16.00
Vendor Shipping Everywhere else Any Any $26.00

We’re here to help you buy the hottest products affordably, with fast shipping and World-Class Customer Support. However, please review the newly imposed tariffs and the Delivery tab to review our Return and Refund policies before making a purchase. Our prices are in US dollars.

Tariff: We ship directly from the country of origin, such as China, Italy, or Taiwan, helping you avoid or pay lower tariffs. Since we don’t always ship products to you from the USA (except for products made in the USA or stocked), you won’t be affected by the new tariffs imposed by the USA. Due to new tariff agreements, not all products are subject to tariffs, as tariffs vary by country and product. For example, customers in the USA will pay a tariff on products imported from China, based on the tariff rate agreed between the USA and China. If applicable, you, the customer, will pay the tariff in your country. The total amount of your order does not include a tariff, which you’ll pay before the delivery. We won’t refund if you don’t pay the tariff.

Why aren’t we adding tariffs to the product’s retail price? If all countries imposed the same tariff amount and used the same currency, we would have added that tariff to the product’s retail price. Our suppliers and we are not responsible for tariffs. Please shop accordingly.


Tariff via DHL: Click https://www.delivery.dhl.com/on-demand-delivery.xhtml?ctrycode=US or click on the Order Tracking link we emailed to you with your tracking number. Or call DHL at 1-800-225-5345  (toll-free) or +603 7964 2800 (overseas). Contact DHL: https://mydhl.express.dhl/us/en/help-and-support.html#/contact_us. For international customers: https://ondemand.dhl.com/

Tariff via FedEx: Click the Order Tracking link in the email we sent you to view your tracking number, or call FedEx at 1-800-GoFedEx (1-800-463-3339). Or Pay here: https://www.fedex.com/en-us/shipping/international/duties-and-taxes.html.

Tariff via UPS: Click the Order Tracking link in the email we sent with your tracking number, or call UPS at 1-800-742-5877.

Tariff via USPS: Click the Order Tracking link in the email we sent you to view your tracking number, or call 1-800-ASK-USPS (1-800-275-8777).


Ships From: On this product page, check the Ships From: label to see which country the product ships from. We do not ship all products from the USA; some products ship from regions such as China, Taiwan, Canada, and Europe. Therefore, the tariff you pay depends on the country of origin, as not all countries charge the same rate. For example, suppose the US imposes a 30% tariff on goods imported from China; in contrast, other countries may impose a significantly lower tariff, or even none at all, on goods shipped from China into their countries.

Attention! We will email you the tracking number so you can follow your parcel. The shipping company will contact you by phone, text, or email to arrange payment of the tariff. However, as the customer, you are responsible for responding to their calls, texts, or emails. You can also use the tracking number link we emailed you to contact the shipping company and pay any applicable tariffs, if you haven’t already.

Heads Up! We’re not responsible for parcels returned to us if you don’t pay the tariff or fail to follow up with the shipping company. As a result, if the shipping company returns the parcel to its country of origin, you will be responsible for reshipping costs and applicable tariffs. We will not accept any excuses for nonpayment of the tariff or for failing to follow up with the shipping company regarding the tariff, and we will not issue a refund.

More From: