AC to DC 0-220v Output Reversible Speed Adjustable Motor Controller for Brushed Motor
This driver features an anti-interference design, which also minimizes the interference it causes to external electronic devices. It can be applied to automatic control interfaces in terms of external signal control. The control method can utilize analog and switch signals to regulate the driver’s function. A single-chip microcontroller controls commutation and features intelligent logic, enabling it to determine the motor’s rotation automatically. The speed and current value are then determined by the commutation time. They can also be used to achieve stop braking and fast commutation braking after connecting energy-consuming braking resistors. This method is different from conventional commutation.
Compared to other methods, it has the characteristics of reliable commutation, low noise, minimal interference, long lifespan, and no arc light. The external control signal utilizes current transmission, thereby increasing its anti-interference ability. The ability and reliability of the speed controller are enhanced by adopting SMT technology, which is compact, cost-effective, and widely used in the industry.
Application scope: Suitable for the control requirements of the ordinary commutation function of a low-power DC motor.
Main technical parameters:
1. Input voltage: AC: 220V ± 10%
2. Output voltage: DC: 0-20V
3. Output current: DC: 8A
4. Given method: potentiometer 10K Ω/2W
5. Control accuracy: ≤ 1%
6. Speed ratio: 1:100 (open-loop)
7. Environmental temperature: -10 ℃~+60 ℃
8. Environmental humidity: Relative humidity ≤ 80HR. (No condensation)
Characteristics:
1. PWM DC pulse width regulator, with low motor operating noise.
2. Suitable for rare earth, permanent magnet, and separately excited motors.
3. Double loop PI regulation.
4. Adopting SMT technology and a small size.
5. Current setting and limit protection.
6. Soft start/soft stop setting function.
7. Quick stop function.
8. High low-speed torque.
9. Equipped with an isolator socket (when paired with an MMT-VID isolator, it can directly input D/A conversion, PLC analog signals, or 4-20mA signals).
10. Remote start, stop, and reversing functions can be achieved.
11. Short circuit protection function


Product Performance:
1. It has relatively hard mechanical properties with a static error rate of 1%.
2. It has a wide speed range (0-maximum).
3. It has a fast dynamic response process.
4. It has an automatic smooth transition process during acceleration and deceleration.
5. Better excavator characteristics, able to automatically limit overload current to the set value current.
6. High reliability, compact structure, and extremely high cost-effectiveness









Reviews
There are no reviews yet.