2 x 100W Class D Bluetooth Audio Amplifier Board – TSA7510B(TWS/Apt-X)
The TSA7510B is a 2x100W audio amplifier board with a new AudioB plus Bluetooth module that supports Apt-X. It features perfect class-D architecture (based on the TPA3221), with each channel capable of delivering 100W of power output. Both channels are capable of outputting nominal power simultaneously and continuously. Any DC 12V-30V power supply can power this board and is compatible with 2Ω, 4Ω, or 8Ω passive speakers. The TSA7510 can also be connected to our TSA1000, TSA1010, or TSA1020 external audio volume control boards, allowing users to adjust the audio volume by rotating an actual knob.
The highlight is the support for Apt-X and TWS, enabling users to stream audio wirelessly to two paired amplifier boards simultaneously. This board is perfect for Hi-Fi applications and can be paired with a mobile phone, computer, or other compatible devices. Use your phone or PC to search for a new Bluetooth device to power the amplifier board. The module will appear as “TSA7510B”. You don’t need a PIN; pair it, and then you can start playing music.
- The TSA7510 can automatically detect Aux/Line-in audio input, and Bluetooth audio sources have a higher priority. When Bluetooth audio is paused or the connection is disconnected, tAmplifierier will switch to outputting the Aux/Line-in audio. If you want to select between Aux/Line-in and Bluetooth audio sources manually, please consider the TSA7498B or TSA7499B.
- The TSA7510 features an extra LINE OUT audio output jack, which can be connected to a subwoofer amplifier board.
- BVC Port: The BVC port can be connected to our Audio Volume Controller to adjust the Bluetooth audio volume.
TSA7510B can automatically detect the Aux in/Line in Audio input. The Bluetooth Audio source has a higher priority. When Bluetooth audio is paused or disconnected, tAmplifierier will output the Aux in/Line in audio.
TSA7510B + TSA1000, Both Aux-in and Bluetooth audio volume can be controlled via BVC port
Two boards work in TWS mode
*User must remove the slave board Aux in Enable jumper before pairing two boards
- S1 – Long press 3s to enter pairing mode. Long press 6s to clear the pairing info.
- S1+S2 – Long press 1s to enter TWS slave mode.
- S1+S3 – Long press 1s to enter TWS master mode.
- S2+S3 – Long press 1s to disconnect the TWS connection.
Specification:
Typically at +25℃, it is powered by 24V DC unless otherwise noted. Subject to change without notice.
Parameter | Condition | Min | Typ | Max |
Supply Voltage (VDC) | – | 10 | 24 | 30 |
Power output per channel | RL= 3Ω, 10% THD+N | 112W | ||
RL= 4Ω, 10% THD+N | 105W | |||
RL= 3Ω, 1% THD+N | 100W | |||
RL= 4Ω, 1% THD+N | 88W | |||
THD+N | 1W | 0.02% | ||
SNR | A-weighted,Gain= 18 dB | 108dB | ||
DNR | A-weighted,Gain= 18 dB | 109dB | ||
Minimum Load Impedance | 3Ω | 4Ω | ||
Gain | 18dB | 24dB | 34dB | |
Efficiency | 100W @Â 4Ohm | 90% | ||
Input Impedance | 18dB | 48KΩ | ||
24dB | 24KΩ | |||
30dB | 12KΩ | |||
34dB | 7.7KΩ |
Features:
- Dimensions: 122mm x 80mm x 18.6mm
- aptX, aptX Low Latency, SBC and AAC
- Bluetooth 5.0
- Bluetooth audio volume control port(BVC)
- Aux in/Line in auto-detect
- Subwoofer output port
- Working voltage: DC12V-30V
- Over/under voltage protection
- Over current protection
- Over temperature protection
Applications:
- Personal computer
- Background music system
- Musical instrument amplifiers
- Home DIY
- Car Audio
Reviews
There are no reviews yet.