2 x 30W DSP Digital Audio Amplifier Board – TSA3120A

$35.15

TSA3120A is a 2x30W digital audio amplifier board. It has a digital Input, Closed-Loop Class-D Amplifier chip TSA5756M and each channel has a maximum 30W power output. Both channels can output nominal power simultaneously and continuously. This board can be powered by any DC12V-24V power supply and can drive any 4Ω or 8Ω passive speakers.


Made In: China

Supplier: TinySine SKU: G67D3C886DDBAC Categories: , , , , Tags: , , , ,

2 x 30W DSP Digital Audio Amplifier Board – TSA3120A

TSA3120A is a 2x30W digital audio amplifier board. It has a digital Input, Closed-Loop Class-D Amplifier chip TSA5756M and each channel has a maximum 30W power output. Both channels can output nominal power simultaneously and continuously. Any DC12V-24V power supply can power this board and drive any 4Ω or 8Ω passive speakers. The highlight point is the ADAU1701 DSP chip on board. It has a default DSP program loaded. Customers can adjust the gain, Bass, midrange, and treble in the DSP program. It also has a debug port for Sigma Studio, and the user can program this module with our USBi programmer to get more functions, including equalization, crossover, bass enhancement, multiband dynamics processing, delay compensation, etc. TSA3120A is the baseboard of TSA3120B. You can also plug an AudioB I2S module into the board, and then it becomes a Bluetooth audio amplifier.

BVC port: This function is not supported on TSA3120A.

Volume Control POT Port:

There is an Ext POT port on the board. You can connect external POTs (5K~20K) to control the Main volume, treble, middle, and Bass. You need to update the DSP program first. DSP program (with external POTs). This is our POT kit

  1. ADC0- Main volume.
  2. ADC1- Bass volume.
  3. ADC2- Middle volume.
  4. ADC3- Treble volume.

DSP programming port: The user can load a new DSP program using the USBi JTAG Sigma DSP programmer.

The following table lists all typical data on the amp board. For full specifications, please refer to the datasheet of TI’s TAS5756M chip.

TA = 25 °C, fIN = 1 kHz sine wave, RL= 4Ω, VCC = 24V. (Unless otherwise stated)

Parameter Condition Min Typ Max
Supply Voltage (VDC) 12 24
Quiescent Current (mA) 85
Full-Scale Input 2V rms
Input Impedance (Kohm) 17.8 30 42
Gain (dB) Can be changed in the DSP program 26
Output Power (Per channel) THD+N = 0.1% 28W
Efficiency (%)
Both channels output rating power
>90
Minimum Load (ohm) 3
Frequency Response (dB) ±3dB 20 22k
Operating Temperature (℃) 0 20 50

Features:

  • Size: 105*75*20mm
  • 2 channels
  • Maximum 30W power output for each channel
  • ADAU1701 DSP chip on board
  • Working voltage: DC12V-24V
More From: