Adeept Smart Car Kit – Compatible with Arduino IDE – DIY STEM Educational Robot Car Kit
This Smart Car Kit is designed for teens to learn coding, building, and robotics. It is developed based on MEGA328P and is fully compatible with Arduino IDE. It is the best choice for learning programming and robotics.
Easy to Assemble and Build – Detailed tutorials(320 Pages, 22 Lessons) and complete code are provided. The download link can be found on the card in the box (Paper tutorials are NOT available as the tutorials are updated frequently).
Multiple Control Methods – Wireless remote control by IR remote control; Remote controlled by Android APP.
Multiple Functions – IR/Wi-Fi remote control; Obstacle avoidance; Line tracking; Light Tracing; OLED display; 128-pixel LED dot matrix display; Dual 10mm RGB LED turn signal; Extended WS2812 RGB LED light strip.
Control Board with Charging – The Adeept Robot Control Board integrates an 8.4V battery charger, allowing you to directly charge the battery through the Type C interface without purchasing an additional charger.
Important Tips: This kit is loose, and you must assemble it yourself!
Lessons:
- 0001 Adjust the initial angle of the servo
- 0002 Assemble
- 001 Introduction of Adeept Robot Control Board
- 002 Building the Arduino Development Environment
- 01 Onboard LED
- 02 Servo Motor
- 03 Control the Servo through PCA9685
- 04 How to Control a DC Motor
- 05 Buzzer
- 06 Control the RGB LED
- 07 WS2812 RGB LED
- 08 Measure Distance
- 09 Light Tracing
- 10 Line Tracking
- 11 OLED Display
- 12 Control the 16×8 LED Matrix
- 13 Get battery level information
- 14 IR Remote Control
- 15 IR Remote Control Car
- 16 WiFi Remote Control Car
- 17 Remote Control by Computer
- 18-Line Tracking Car
- 19 Light Tracing Car
- 20 Obstacle avoidance and automatic following
Package List:
- 1 Set Structure Parts(Acrylic)
- 1x Adeept Robot Control Board(Based on MEGA328P, fully compatible with Arduino IDE)
- 1x OLED Display
- 1x ESP8266 WiFi Module
- 1x Ultrasonic Module
- 1x 3-CH Line Tracking Module
- 1x Light Tracing Module
- 1x IR Remote Control
- 1x 16×8 LED Matrix Module
- 1x WS2812 RGB LED Module
- 2x Adeept RGB LED Module
- 3x Servo Motor
- 2x TT Motor
- 2x Front Wheel
- 2x Rear Wheel
- 4x F624ZZ Bearing
- 4x F687ZZ Bearing
- 1x Battery Holder
- 1x Type-C USB Cable
Other Necessary Accessories(Cables, Nuts, Screws, Copper Standoffs, Nylon Standoffs, Tools, etc.)
Reviews
There are no reviews yet.