Bluetooth Low Energy BLE Module MDBT53V-1M

$8.90

Model No: MDBT53V-1M

  • Nordic nRF5340 SoC Solution
  • Dual-core Arm® Cortex® M33
  • 1MB/256KB Flash Memory; 512kB/ 64kB RAM
  • Bluetooth specification v5.2
  • Supports for Bluetooth Direction Finding & Mesh
  • Supports Bluetooth low-energy audio
  • Certifications: FCC, IC, CE, Telec (MIC), KC, SRRC, NCC, RCM, WPC
  • RoHS & Reach Compliant.
  • Dimension: 7.8 x 12.4 x 1.85 mm
  • 25 GPIO
  • Chip Antenna
  • Interfaces: SPI, UART, I2C, I2S, PWM, ADC and NFC
  • Operating temperature: -40 to +105°C
  • This highly flexible multiprotocol SoC is ideally suited for Bluetooth® Low Energy, ANT+, Zigbee, and Thread (802.15.4) ultra-low-power wireless applications.
  • A recommended 3rd-party module by Nordic Semiconductor.

Bluetooth Low Energy BLE Module MDBT53V-1M

Raytac’s MDBT53V & MDBT53V-P is a BT5.2 stack (Bluetooth Low Energy or BLE) module designed based on the Nordic nRF5340 SoC solution. It incorporates GPIO, SPI, UART, TWI, I2C, PDM, PWM, ADC, and NFC interfaces for connecting peripherals and sensors.

Network Core

  • ARM® Cortex®-M33 with TrustZone® technology
  • 64 MHz operation
  • 256 kB flash
  • 64 kB low leakage RAM
  • Bluetooth® 5.2, IEEE 802.15.4-2006, 2.4 GHz transceiver
  • -98 dBm sensitivity in 1 Mbps Bluetooth Low Energy mode
  • -104 dBm sensitivity in 125 kbps Bluetooth Low Energy mode (long range)
  • -101 dBm sensitivity in IEEE 802.15.4
  • -20 to +3 dBm configurable TX power
  • On-air compatible with nRF52, nRF51, nRF24L, and nRF24AP Series

Supported Data Rates

  • Bluetooth 5.2 – 2 Mbps, 1 Mbps, 500 kbps, and 125 kbps
  • IEEE 802.15.4-2006 – 250 kbps
  • Proprietary 2.4 GHz – 2 Mbps, 1 Mbps
  • Angle of Arrival (AoA) and Angle of Departure (AoD) direction finding
  • 128-bit AES/ECB/CCM/AAR co-processor (on-the-fly packet encryption)
  • SPI master/slave with EasyDMA
  • I2C compatible two-wire master/slave with EasyDMA
  • UART (CTS/RTS) with EasyDMA
  • Up to 3x 32-bit timer with counter mode
  • Up to 2x real-time counter (RTC)

Application Core

  • ARM® Cortex®-M33 with TrustZone® technology
  • 128 MHz or 64 MHz operation
  • Single-precision floating-point unit (FPU)
  • Digital signal processing (DSP) instructions
  • 1 MB flash and 512 kB low leakage RAM
  • ARM TrustZone CryptoCellâ„¢-312 security subsystem
  • QSPI peripheral for communicating with an external flash memory device
  • Near field communication (NFC-A) tag with wake-on field
  • Up to 5x SPI master/slave with EasyDMA
  • Up to 4x I2C compatible two-wire master/slave with EasyDMA
  • Up to 4x UART (CTS/RTS) with EasyDMA
  • Audio peripherals: I2S, digital microphone interface (PDM)
  • Up to 4x pulse width modulator (PWM) units with EasyDMA
  • 12-bit, 200 KSSPS ADC with EasyDMA – eight configurable channels with programmable gain
  • Up to 3x 32-bit timer with counter mode
  • Up to 2x 24-bit real-time counter (RTC)
  • Up to 2x Quadrature decoder (QDEC)
  • SPQ: 120/tray; Less than SPQ is workable (Polybag ship)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Raytac Corporation was established in 2004 by a group of engineers with expertise in radio frequency (RF) technology and a team of experienced senior multinational marketing and production personnel. With the core technology know-how in RF and Bluetooth, R&D, and manufacturing and marketing of wireless electronic products, Raytac is committed to providing customers with a more convenient wireless choice.

With the coming hype of IoT, Bluetooth Low Energy (BLE) has become the key to triggering the future. Following Nordic Semiconductor’s steps in the wireless field, Raytac perpetuates efforts to launch various modules to fulfill all developers’ needs and demands.

Raytac acknowledges that developers deserve the best hardware to encourage each IoT plan to connect without borders and inspire without end. We have resolved to focus on creating sophisticated hardware with an easy layout for flexible design. Moreover, the modules are fully certified with not only Bluetooth specification BT4.2, BT5.1, and the latest BT5.2, but also regional safety regulations in central areas such as FCC (USA), CE (EU), IC (Canada), TELEC (Japan), KC (Korea), SRRC (China), RCM (ANZ), WPC (India), etc. Raytac aims to build a value chain to provide customers with a cost-effective, speed-time-to-market solution and reliable quality control system with years of experience.

The mission is “Making people’s lives more convenient through innovation and application of wireless technology.” Raytac will constantly evolve and adapt its Bluetooth technology to provide all its customers with the best solutions in the wireless world. Moreover, we are devoted to being one of the world’s leaders in wireless technology and making increasingly significant contributions to humanity.

Shipping Policy

FAST DELIVERY! We ship worldwide via FedEx, UPS, DHL, and USPS because they’re Fast, Reliable, Affordable, and Easily Trackable. We process orders in 24 hours; delivery may take 4 to 7 days or sooner, depending on your location. Once shipped, you will receive an email with your tracking number.

Ships From: Not all our products are shipped from the USA; we ship some from regions like China, Taiwan, or Europe. Therefore, the tariff you will pay will differ depending on which country your order will be shipped from because not all countries charge the same amount. For example, if the US imposes a 30% tariff on goods from China, other countries may impose a much lower tariff. Check the "Ships From:" label on this product page to see from which country we will ship it.

TARIFF: Check the "Ships From:" label on this product page to see which country we will ship this product from. While not all products require a tariff, some may require a minimal or no tariff in your country. If applicable, the buyer will pay the tariff within their respective country. The total amount of your order does not include a tariff. Please enter a reachable phone number during checkout so the Shipping Company can contact you to pay the tariff once your parcel arrives at your destination.

Why don't we add tariffs to the product's retail price? If all countries imposed the same tariff amount and used the same currency, we would have added the tariff amount to the product price. However, we do not do that because each country charges a different amount and uses a different currency, while some do not even charge a tariff. Therefore, we can't add a tariff to the product's retail pricing. Oz Robotics' manufacturing partners, or suppliers are not responsible for tariffs. Please check the "Ships From:" label on the product page to see the product's origin. The total amount for your order does not include a tariff. The customer must pay the tariff. We will not cancel your order or refund you if you do not pay the tariff. More Details.

SHIPPING COSTS: For some industrial products, e.g., heavy wheels, CNC machines, etc., the shipping cost is calculated based on the product weight, not quantity. For lower shipping costs for orders with multiple items, please email us at sales@ozrobotics.com before you buy. We show shipping rates on the product page under the SHIPPING tab. To see the shipping cost for your country, click add to cart on the product page.

PRODUCT DATASHEET AND MANUAL: If applicable, the Product Documentation, such as the Datasheet, CAD Design, STP Files, Manuals, Reference Materials, and Tutorials, will be available for download upon purchase from the My Account as needed. On the checkout page, please create an account to download product-related files upon purchase. You won’t be able to download otherwise.

##################################

Return Policy

WITHIN 5 HOURS: Mistakes happen when ordering, so you have 5 hours to request an order cancellation, but we cannot refund the PayPal or Stripe Processing fee because they do not refund us.

WITHIN 24 HOURS: Your order has either been shipped, prepared to ship, or custom-made. If you still want to cancel your order after 5 Hours, we will deduct 30% of the total for restocking + PayPal or Stripe processing fees and the Return Shipping cost for unopened packages.

AFTER RECEIVING YOUR ORDER: If you decide not to keep your order after it arrives, we will deduct 80% of the total + the shipping fee if we find it refundable after a review. Please see our Refund and Replacement Policy

EXCHANGE POLICY: Oz Robotics wants you to be happy with your new purchase. However, we abide by the policy of our manufacturer partners because we do not manufacture these products; they do. Once you use the product, we cannot issue a refund. But we will offer an exchange for a wrongly purchased product with irreversible defects or technical problems. The customer will pay the shipping fee for a wrongly purchased product or similar issues. If the product you purchased is defective, email us at support@ozrobotics.com with photos or a video of the defective parts so we can evaluate it before you send it. More on Replacement Policy.

REFUND POLICY: Oz Robotics accepts refunds on a minimal basis unless there is a manufacturing defect. For electronic items, returns are only accepted on devices with serious and irreversible problems; meanwhile, the customer must apply for the returns within seven days of delivery. Before a refund acceptance, please include images or a video and any other proof of the defect. For more info please visit Refund Policy.

Once we agreed on a return, you can ship your defective item to the provided address, which you should receive from us first. Please ship the order in its original packaging with all the accessories and additional parts. If the Required Parts are not sent back, they will be billed for or expected to be shipped later. We will check the product for testing once all items have arrived. In your package, include a signed letter stating the reason for the product return, the original receipt, proof of defect, images, a video, etc. It will help us to speed up the process for you.

When returning the item, the customer is responsible for the shipping cost. However, we will assess the product, and if it is determined that there is a manufacturing defect and the product is not fixable, we will refund the shipping cost, repair, replace, or refund the full amount to the customer.

Do not return your product to our New York office. For any exchange or refunds, email us first at support@ozrobotics.com for us to provide you with the steps that need to be followed. Any product you return must be in the same condition you received and returned in the original packaging without being used. Please keep the original receipt.

Shipping costs

Shipping from Taiwan
Within Taiwan $38.00
Outside Taiwan $38.00

National Shipping Details

Maximum shipping charge per order $38.00
Free shipping if the order spend is over $200.00

International Shipping Details

Maximum shipping charge per order $38.00
Free shipping if the order spend is over $200.00