Certified Bluetooth 5.0 Low Energy Modules RF-BM-4077B1L

$11.05

  • Protocols: Bluetooth 5.0 low-energy
  • Package (mm): 23.5 × 17.0 × 1.7, half-hole, 1.27 pitch, 36-pin
  • Features: LE 1M PHY, LE 2M PHY, LE Coded PHY (long range), Advertising extension
  • GPIO: 31
  • Max. TX Power: +5 dBm

RF-Star Cheap CC2640R Chip Certified Bluetooth 5.0 Low Energy Modules RF-BM-4077B1L

RF-BM-4077B1L is a PCB module based on TI CC2640R2L wireless MCU supporting Bluetooth 5.1 Low Energy (BLE) stack. To minimize users’ design effort, the RF-BM-4077B1L module has integrated a 24 MHz crystal, a 32.768 kHz crystal, an LC balun, and an inverted-F PCB antenna. The CC2640 SoC contains a 32-bit ARM CortexTM-M3 main processor at 48 MHz, a rich peripheral feature set. Its 2.4GHz radio processes very low active current and outstanding RF performance.

It is pre-programmed with an application communication protocol over its serial interface and an AT command set, which allows users to quickly connect their application to build a reliable BLE connection for their products. This module fits into a wide range of BLE applications where robust connection, long battery lifetime, small form factor, and ease of use are important.

  • Wireless SoC: ARM® Cortex®-M3
  • TX power: 21.0 dBm ~ +5.0 dBm (typical: 0 dBm)

Sensitivity: -97 dBm

Current Consumption

  • 2.71 μA in sleep mode
  •  160.54 μA at 200 ms broadcast cycle (disable the internal EN pull-up)
  •  457.13 μA at 20 ms connection cycle (disable the internal EN pull-up)

Features

  • 2.4 GHz RF transceiver compatible with Bluetooth low energy 5.1 and specification
  • Excellent receiver sensitivity (-97 dBm for BLE)
  • Programmable output power up to +5 dBm
  • Signal-ended or differential RF interface

Operating Range

  • Supply voltage range: 1.8 V ~ 3.8 V
  • Operating Temperature: -40 °C ~ +85 °C

Rich Peripherals

  • 12-bit ADC
  • 31 GPIOs
  • SPI
  • I²C
  • I²S
  • RTC
  • UART (CTS/RTS)
  • AES-128

Applications

  • Smart toys
  • Fitness equipment
  • Environmental sensor nodes
  • Passive key-less entry (PKE)
  • Smart door locks
  • Phone Accessories
  • Health-care equipment
  • Smart lighting
  • Energy harvesting
  • Thermometer
  • Human input devices
  • Sports equipment
More From: