Closed Loop Stepper Driver V4.1 0-3.0A 24-48VDC for Nema 11, 14, 17 Stepper Motor

$36.14

The CL42T is the latest 4.1 version, which compared to the 4.0 version, opens up the RS232 interface and provides a debugging cable for free, making it more convenient to configure parameters.


Made In: China

Supplier: StepperOnline SKU: CL42T-V41 Categories: , , , More From:

Closed Loop Stepper Driver V4.1 0-3.0A 24-48VDC for NEMA 11, 14, 17 Stepper Motor

CL42T is a closed loop stepper driver designed to solve the loss of step problem in open loop stepper control systems, thus increasing system reliability at a minimal cost increase. It implements an advanced control algorithm based on its tens of years of experience in stepper and servo controls. The CL42T is highly reliable and affordable and performs excellently in many industrial applications such as CNC, medical, electronics, and packaging.

The CL42T can power 2-phase NEMA11, 14, and 17 stepper motors with incremental encoders(Encoder resolution must be 1000-line). Compared with traditional open-loop stepper systems, a CL42T adopted closed-loop step system can eliminate potential step loss, make real-time position error correction, and do not need torque reservation (100% torque implementation). Also, it can power the driven stepper motor with reduced heating, lower noise, and low vibration.

The CL42T is the latest 4.1 version, which compared to the 4.0 version, opens up the RS232 interface and provides a debugging cable for free, making it more convenient to configure parameters.

Key Features:

  • No loss of step
  • No torque reservation
  • No hunting or overshooting
  • No tuning for easy setup
  • Low noise and vibration, smooth motion
  • 24-48VDC supply voltage, max 3A output current
  • Max 200 KHz input frequency
  • 15 micro-step settings of 800-51,200 via DIP switches or 200-51,200 via software (increase by 200)
  • Protections for over voltage, over current, and position following error

Electrical Specifications:

  • Output Peak Current: 0~3A
  • Input Voltage: +24~48VDC (Typical 24VDC)
  • Logic Signal Current: 7~16mA (Typical 10mA)
  • Pulse Input Frequency: 0~200kHz
  • Pulse Width: 2.5μS
  • Isolation Resistance: 500MΩ

Operating Environment and other Specifications(Tj = 25℃/77℉):

  • Cooling: Natural Cooling or Forced cooling
  • Environment: Avoid dust, oil fog, and corrosive gases
  • Ambient Temperature: 0℃ - 65℃
  • Humidity: 40%RH-90%RH
  • Operating Temperature: 0℃ - 50℃
  • Vibration: 10-50Hz / 0.15mm
  • Storage Temperature: -20℃ - 65℃
  • Weight: Approx.220g (7.76oz)

Product Datasheet and Manual

If applicable, the Product Documentation, such as the Datasheet, Brochure, Reference Materials, CAD Design, STP Files, Manuals, and Tutorials, will be available for download upon purchase from the My Account as needed. On the checkout page, please create an account to download product-related files upon purchase. You won’t be able to download otherwise.


Make money through one of the following partnerships with Oz Robotics.

 – Become An Affiliate
Become A Freelancer
Become A Supplier


Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

STEPPERONLINE was founded in 2005 as a Top 1 online distributor and wholesaler of stepper motors, BLDC motors, gearboxes, and power supplies. We aim to create the best place online to provide high-quality stepper products at a lower price.

Shipping Policy

Please check your SPAM folder to ensure you accept emails from OzRobotics.com to receive your tracking number and download product-related files.

WE SHIP WORLDWIDE: We primarily ship via FedEx, UPS, DHL, and USPS because they’re reliable, fast, and easily trackable. We usually ship within two to three business days after the full payment. Standard delivery generally occurs within 5 to 7 business days after the shipping date. However, the delivery may take about 7 to 10 business days, depending on the shipping destination, logistics, weather conditions, product weight, size, or shipping company distribution structures.

SHIPPING COSTS: For some industrial products, e.g., heavy wheels, CNC machines, etc., the shipping cost is calculated based on the product weight, not quantity. To benefit from lower shipping costs for orders with multiple items, please contact us at sales@ozrobotics.com. Our shipping rates are listed clearly on each product page under the SHIPPING tab. Additionally, to see the shipping cost for your country, add the item to the Shopping Cart; you will see the shipping cost based on your Country and Location.

CUSTOMS and TARIFFS: While not all products require a tariff, some products may require a minimal tariff if applicable in your country. The total amount for your order does not include a customs fee/tariff. The United States Customs and Border Protection (CBP) deducts import tax, or customs duty, on goods valued over $800 USD from customers located in the US. A tariff belongs to the buyer when applicable. Why don't we add tariffs to the product's retail price? - If all countries deducted the same tariff amount, we would have added the tariff amount to the product price. However, we do not do that because each country charges a different amount, while some do not even charge. Therefore, we can't add any tariff to the product's retail pricing. Oz Robotics, manufacturing partners, or Suppliers are not responsible for tariffs. Please check the "Made In:" and "Brand:" labels on the product page to see the product's origin. The total amount for your order does not include any duties, import taxes, customs fees, and GST/VAT. The buyer must pay all import duties. If you choose not to pay the tariff and parcel returns, there will not be any refund. Please click here to see more on Tariffs.

Return Policy

WITHIN 5 HOURS: Mistakes happen when ordering, so you have 5 hours to request an order cancellation, but we cannot refund the PayPal or Stripe Processing fee because they do not refund us.

AFTER 5 HOURS: After 5 hours, your order has either been shipped, prepared to ship, or custom-made. If you still want to cancel your order after 5 Hours, we will deduct 30% of the total for restocking + PayPal or Stripe processing fees and the Return Shipping cost for unopened packages.

AFTER RECEIVING YOUR ORDER: If you decide not to keep your order after it arrives, we will deduct 80% of the total if we find it refundable after a review. Please see our Refund and Replacement Policy

EXCHANGE POLICY: Oz Robotics wants you to be happy with your new purchase. However, we abide by the exchange policy of our suppliers because we do not manufacture these products; our suppliers do. Once you use the product, our supplier(s) and we have the right not to issue a refund. Still, we will offer an exchange for wrongly purchased items or products with serious and irreversible defects or technical problem(s). The buyer will pay the shipping fee for wrongly purchased products or similar issues. If the product you purchased is defective, please email us at support@ozrobotics.com with photos or a video of the defective parts to evaluate before you send it. Click HERE for more on Refund and Replacement Policy

REFUND POLICY: Oz Robotics accepts refunds on a minimal basis unless there is a manufacturing defect. For electronic items, returns are only accepted on devices with serious and irreversible problems; meanwhile, the customer must apply for the returns within seven days of delivery. Before a refund acceptance, please include images or a video and any other proof of the defect. However, we abide by the exchange policy of our suppliers because we do not manufacture these products. For more info please visit Refund and Replacement Policy.

Other than our supplier's default policy, once a return is agreed upon, you can ship your defective item to the provided return address that you should receive from us first. Please ship the order in original packaging with all the accessories and additional parts. If the Required Parts are not sent back, they will be billed for or expected to be shipped later. And only once all items have arrived will our staff check the returned product for testing. Include in your package a signed letter stating the reason for your return, the original receipt, proof of defect, images, a video, etc. It will help us to speed up the process on your behalf.

The purchaser (customer/buyer) is responsible for all shipping costs when returning an item. However, upon receiving the returned order, we will assess the product. If it is determined that there is, in fact, a manufacturing defect, then we will refund the shipping costs as well as repair or replace or refund the full amount to the purchaser if the product is not fixable.

If you wish to return an unused product, please do so within seven days from the ship date for a refund on the purchase price minus shipping and handling. Refunds will be credited to the original credit card used for payment 24-48 HOURS after receiving the product back. We will charge a 80% of the total for restocking + PayPal or Stripe processing fees and the Return Shipping cost for unopened packages.

Once your return is received and inspected, and if you agree to a refund, refunds will be credited to the original credit card used for payment in 24-48 hours. Please note that we will charge an 80% restocking fee once you return a product without any defect.

Once your refund is processed, PayPal will return the money to the card used. It may take at least five business days (depending on the bank and credit company) before your refund is posted in your bank account and statements. Contact Us if you have not received your refund after five business days.

Do not return your product to our New York office. For any exchange or refunds, please email us first at support@ozrobotics.com for us to provide you with the steps that need to be followed. Any product you return must be in the same condition you received and returned in the original packaging without being used. Please keep the original receipt. More on Refund and Replacement Policy.

Shipping costs

Shipping from China
Outside China $30.29