Sale!

HeatSign CNC Pneumatic Deep Dot Peen Marking Machine For Metal Direct Parts Marking

Original price was: $3,300.00.Current price is: $2,938.00.

  • HeatSign CNC Dot Peen Metal Engraving Marking Machine, no need PC anymore
  • This CNC engraving machine Adopts an Imported guide rail with high marking precision.
  • Compact Machine Design, keep machine stable working
  • Low consumption and operating costs, can do deep marking
  • It can mark various content automatically, such as English letters, Logos, Graphics, Serial numbers, Vin codes, etc.

PLEASE DO NOT BUY THIS MACHINE UNTIL YOU EMAIL US ANSWERS TO THE QUESTIONS BELOW.

1. What’s your product material?
— The material can be metals.

2. What’s the product size?
— The machine is suitable for a big little product, usually used on a table, mainly for marking small or medium-sized products.

3. What’s your marking range?
— The machine marking area is 120mm X 80mm. If it exceeds the marking area, the machine is not available.

4. Is it marking on the flat surface?
—- Yes, the machine is only marked on the flat surface. If you want to mark on a round part, pls contact us and customize the machine according to your requirements.

HeatSign CNC Pneumatic Deep Dot Peen Marking Machine For Metal Direct Parts Marking

A pneumatic CNC dot peen marking machine is also called a dot peen engraving machine, which needs work with an air compressor(customer prepared) to create an engraving effect on your metal plate surface. You can write English letters and numbers. Symbols and other content into your computer with our software.

Then our marking software converts the content to a digital control signal, transmitted to the controller, and the machine starts mark on the workpiece by high-frequency continuous dot marking; you can control the dot marking result or line marking result by our software.

Excellent Performance

1). Connect to a computer by USB interface; easy to install and operate.
2). Adopt imported guide rail with high marking precision.
3). Compact Machine Design, keep machine stable working.
4). Low consumption and operating costs
5). The machine can mark any metal or nonmetal material which hardness within HRC 60
6). Can Mark various content automatically such as Chinese, English, Graphics, Serial number, Vin code, etc.
7). CNC controller integrated software and touch screen, no need PC anymore.

Dot Peen Machine Advantages

1. Applying the most widely used up-down lifting structure to mark different size metal parts.
2. CNC controller integrated 7-inch touch screen and software with powerful edit function, it can mark any logo, character, letter and graph, data code, series number, VIN code, engine numbers automatically
3. Integrated and compact design, easy to install and operate.
4. It adopts imported guide rail, high marking precision
5. Work with pneumatic airpower can do deep and clear marking

Technical Parameters

Item Number: HS-DC01
Marking area: 120mm x 80mm surface
Power source:220V 50HZ or 110V 60HZ
Power Consumption:125W
Control connection port: USB
Engraving machine type: Desktop, benchtop
Engraving depth:0.02-0.5 mm (adjustable, depending on materials)
Marking speed:2 letters~4 letters/s according to letter size (height 2mm)
Marking materials request: Hardness less than HRC60
Pneumatic pressure:0.3-0.6 Mpa

Applicable Materials

The machine can mark all metals such as Steel, Stainless Steel, Copper brass, Gold, Silver, etc. Ideal for marking on hard plastics. It is mainly used for engraving and marking on direct parts, nameplates, Vin codes, component identification and traceability, metal ag, and label. Cast, forge rod, engine, tools, gear, pump, etc.

Package

Compact the Plywood Case package, and keep delivery safe.

Note: This machine should be connected to the air compressor when used.

Additional information

Weight 88 lbs

Product Datasheet and Manual

If applicable, the Product Documentation, such as the Datasheet, Brochure, Reference Materials, CAD Design, STP Files, Manuals, and Tutorials, will be available for download upon purchase from the My Account as needed. On the checkout page, please create an account to download product-related files upon purchase. You won’t be able to download otherwise.


Make money through one of the following partnerships with Oz Robotics.

 – Become An Affiliate
Become A Freelancer
Become A Supplier


Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

HeatSign provides support for Direct Part Marking (DPM) technologies and engraving machines. Our inventory includes a wide range of high-precision solutions for your product engraving and marking needs. Our main products include Dot Peen marking machines (pneumatic marker or electric), CNC engraving systems, laser marking machines, and other customized industrial marking solutions.

Shipping Policy

Please check your SPAM folder to ensure you accept emails from OzRobotics.com to receive your tracking number and download product-related files.

WE SHIP WORLDWIDE: We primarily ship via FedEx, UPS, DHL, and USPS because they’re reliable, fast, and easily trackable. We usually ship within two to three business days after the full payment. Standard delivery generally occurs within 5 to 7 business days after the shipping date. However, the delivery may take about 7 to 10 business days, depending on the shipping destination, logistics, weather conditions, product weight, size, or shipping company distribution structures.

SHIPPING COSTS: For some industrial products, e.g., heavy wheels, CNC machines, etc., the shipping cost is calculated based on the product weight, not quantity. To benefit from lower shipping costs for orders with multiple items, please contact us at sales@ozrobotics.com. Our shipping rates are listed clearly on each product page under the SHIPPING tab. Additionally, to see the shipping cost for your country, add the item to the Shopping Cart; you will see the shipping cost based on your Country and Location.

CUSTOMS and TARIFFS: While not all products require a tariff, some products may require a minimal tariff if applicable in your country. The total amount for your order does not include a customs fee/tariff. The United States Customs and Border Protection (CBP) deducts import tax, or customs duty, on goods valued over $800 USD from customers located in the US. A tariff belongs to the buyer when applicable. Why don't we add tariffs to the product's retail price? - If all countries deducted the same tariff amount, we would have added the tariff amount to the product price. However, we do not do that because each country charges a different amount, while some do not even charge. Therefore, we can't add any tariff to the product's retail pricing. Oz Robotics, manufacturing partners, or Suppliers are not responsible for tariffs. Please check the "Made In:" and "Brand:" labels on the product page to see the product's origin. The total amount for your order does not include any duties, import taxes, customs fees, and GST/VAT. The buyer must pay all import duties. If you choose not to pay the tariff and parcel returns, there will not be any refund. Please click here to see more on Tariffs.

Return Policy

WITHIN 5 HOURS: Mistakes happen when ordering, so you have 5 hours to request an order cancellation, but we cannot refund the PayPal or Stripe Processing fee because they do not refund us.

AFTER 5 HOURS: After 5 hours, your order has either been shipped, prepared to ship, or custom-made. If you still want to cancel your order after 5 Hours, we will deduct 30% of the total for restocking + PayPal or Stripe processing fees and the Return Shipping cost for unopened packages.

AFTER RECEIVING YOUR ORDER: If you decide not to keep your order after it arrives, we will deduct 80% of the total if we find it refundable after a review. Please see our Refund and Replacement Policy

EXCHANGE POLICY: Oz Robotics wants you to be happy with your new purchase. However, we abide by the exchange policy of our suppliers because we do not manufacture these products; our suppliers do. Once you use the product, our supplier(s) and we have the right not to issue a refund. Still, we will offer an exchange for wrongly purchased items or products with serious and irreversible defects or technical problem(s). The buyer will pay the shipping fee for wrongly purchased products or similar issues. If the product you purchased is defective, please email us at support@ozrobotics.com with photos or a video of the defective parts to evaluate before you send it. Click HERE for more on Refund and Replacement Policy

REFUND POLICY: Oz Robotics accepts refunds on a minimal basis unless there is a manufacturing defect. For electronic items, returns are only accepted on devices with serious and irreversible problems; meanwhile, the customer must apply for the returns within seven days of delivery. Before a refund acceptance, please include images or a video and any other proof of the defect. However, we abide by the exchange policy of our suppliers because we do not manufacture these products. For more info please visit Refund and Replacement Policy.

Other than our supplier's default policy, once a return is agreed upon, you can ship your defective item to the provided return address that you should receive from us first. Please ship the order in original packaging with all the accessories and additional parts. If the Required Parts are not sent back, they will be billed for or expected to be shipped later. And only once all items have arrived will our staff check the returned product for testing. Include in your package a signed letter stating the reason for your return, the original receipt, proof of defect, images, a video, etc. It will help us to speed up the process on your behalf.

The purchaser (customer/buyer) is responsible for all shipping costs when returning an item. However, upon receiving the returned order, we will assess the product. If it is determined that there is, in fact, a manufacturing defect, then we will refund the shipping costs as well as repair or replace or refund the full amount to the purchaser if the product is not fixable.

If you wish to return an unused product, please do so within seven days from the ship date for a refund on the purchase price minus shipping and handling. Refunds will be credited to the original credit card used for payment 24-48 HOURS after receiving the product back. We will charge a 80% of the total for restocking + PayPal or Stripe processing fees and the Return Shipping cost for unopened packages.

Once your return is received and inspected, and if you agree to a refund, refunds will be credited to the original credit card used for payment in 24-48 hours. Please note that we will charge an 80% restocking fee once you return a product without any defect.

Once your refund is processed, PayPal will return the money to the card used. It may take at least five business days (depending on the bank and credit company) before your refund is posted in your bank account and statements. Contact Us if you have not received your refund after five business days.

Do not return your product to our New York office. For any exchange or refunds, please email us first at support@ozrobotics.com for us to provide you with the steps that need to be followed. Any product you return must be in the same condition you received and returned in the original packaging without being used. Please keep the original receipt. More on Refund and Replacement Policy.

Shipping costs

Region / Country State Postcode Cost
Any Any Any Free shipping