Touchsy 3.2″ Touch LCD Display Based on ESP32 MCU
Touchsy ESP-32 offers the ideal display solution for users who favor ESP-32 over Raspberry Pi Pico W. With ESP-32, you enjoy the flexibility to program your display using the Arduino platform, making it compatible with a wide range of projects and applications, including IoT and robotics.
You can also choose between resistive and capacitive touchscreens to suit your requirements. Additional GPIO pins are provided to connect additional hardware to your display.
Here are the features and specifications that make Touchsy ESP-32 a unique and must-have accessory:
Features:
- Integrated ESP32-S3 WROOM 1 module, supports 2.4 GHz Wi-Fi and Bluetooth 5 (LE)
- 2″ Display Available in two variants: Resistive and Capacitive touchscreen
- SD card slot for storage and data transfer
- Battery port connector with Battery Management for portable use (3.7V Lithium)
- The remaining GPIO pins breakout for connecting more hardware, Serial, and direct USB
- Type C interface for both Programming and Power
- Additional power supply facility for use with other peripheral
- Perfect security mechanism, support AES-128/256, Hash, RSA, HMAC, digital signatures, and secure boot
- RESET button. Press this button to reset the system.
- BOOT button. Hold the Boot button and press the RESET button to initiate firmware download mode. Users can download firmware through the serial port
- Two additional programmable buttons for customizable control options
Specifications:
- Wi-Fi Protocol: 802.11b/g/n (802.11n up to 150Mbps) Wi-Fi Frequency Range: 2.402GHz – 2.483Ghz
- Support Bluetooth 5
- The operating voltage of pins 3.3V and board supply 5V
- 2″ Display with resolution 240 × 320
- ILI934 Display Driver
- FT6236 capacitive touch controller (Capacitive Variant)
- XPT2046 resistive touch controller (Resistive Variant)
- Appearance: RGB
- Colors: 65K/262K
- Viewing Angle(in degree): Left:70, Right:70, Up:50, Down:70
- The operating temperature is -20℃~70℃
- Storage Temperature is -30℃~80℃
Pinout:
- 3.2″ Capacitive Touch Display
- Extra GPIO breakout
- Buzzer
- Battery connection port
- Power pins breakout
- Type C for Programming and Power both
- Additional GPIO breakout
- SD card slot
- ESP32 S3 module
- Boot Button
- Reset Button
- Two Programmable Buttons
Dimension:
Applications:
- DIY Electronics Projects
- Home Automation & Robotics projects
- Arduino and Raspberry Pi Projects
- Prototyping and Testing
- Data Visualization
- Integrate with Lab Instruments and Measurement Devices
- Internet of Things (IoT) projects
- Educational Projects
Resources:
For Capacitive:
Software GitHub: Getting started guide, Demo example codes, etc.
Hardware GitHub: Hardware design, Schematic, Step file, 3D file, etc.
For Resistive:
Software GitHub: Getting started guide, Demo example codes, etc.
Hardware GitHub: Hardware design, Schematic, Step file, 3D file, etc.
Reviews
There are no reviews yet.