Plasmics INo Trident – Induction Heated Hotend for 3D Printing 0.4mm nozzle

$430.00

Plasmics INo Trident is the world’s first commercially available induction heated hotend for 3D Printing.

Flexible Mount: It can be mounted from the top or the side, making it compatible with almost every FDM 3D Printer.

The innovation of INo Trident is that instead of conventional resistance heating cartridges, Plasmics uses a modulated magnetic field to convert energy into heat. This results in the INo Trident being able to heat up and cool down much faster than a conventional nozzle.


Made In: Austria
Supplier: Plasmics SKU: 11211122 Categories: , Tags: , , , , , More From:

Plasmics INo Trident – Induction Heated Hotend for 3D Printing

The Plasmics Ino Trident – the world’s first commercially available induction-heated nozzle for 3D printing. The Plasmics INo technology employs a modulated magnetic field to convert energy into heat, resulting in faster heat-up and cool-down than a conventional resistance heated nozzle. This improves extrusion temperature stability, which results in better print quality and speeds up multi-material prints by a significant factor. The INo Trident is convection-cooled, while the Delta S uses the water-cooled INo technology system.

Flexible Mount: It can be mounted from the top or the side, making it compatible with almost every FDM 3D Printer.

We developed something precisely for you! The world’s first commercially available induction-heated hotend for 3D printing.


Aluminium Casing

  • The whole assembly weighs less than 30g
  • Dimensions: ø 24.6mm * h 61.5mm

Nozzle

  • Up to 500°C Nozzle temp enabling high-end filament capabilities
  • 1.75mm (2.85 under development)
  • Made from abrasion-resistant tool steel
  • Capable of extruding GF, CF, and PEEK filaments without wear
  • Thermocouple for fast temperature measurement

Induction Heating

  • No temperature overshoot
  • Heats the nozzle from the room
  • temp to 250°C in less than 4 seconds
  • Cools down to 150°C in 15s

Facts

  • The First Commercially Available Induction-Heated Nozzle
  • Working integrations for Klipper, Marlin, and Duet
  • Higher efficiency than comparable Hotends
  • Dedicated Electronics To Power The Induction Coil
  • Low Mass For Maximum Acceleration Without Ringing
  • Nozzle Made From Abrasion Resistant Armor Grade Tool Steel

Technical specifications

  • Max printing temperature: 500°C
  • Temperature sensor type: k-type thermocouple
  • Nozzle material: tool steel
  • Heatsink material: aluminum
  • Voltage options: 24V or 48V
  • Filament diameter: 1.75mm
  • Nozzle diameter: 0.4mm for 1.75 (Contact us for 0.6mm nozzles)
  • Power: 50W or 100W
  • Weight: around 30g
  • Dimensions: 24.6mm * h61.5mm

The package generally contains:

  • INo Trident hotend
  • INo PCB Box
  • PTFE Tube
  • One spare Sock
  • Appropriate additional cables for the respective type of communication:
    • Clipper: USB-C cable
    • SPI: 5-pin connector with 20cm cable and different crimps

Parts List:

  • Trident Sock
  • Trident Cooler
  • Trident Hat
  • Coil Carrier
  • 3pcs M2x8 Screws
  • INo 1.75 with Thermocouple
  • Coil Cable
  • INo Electronics board
  • 24V Cooling fan for Electronics
  • Power Cable
  • Bowden Adapter
  • Bowden PTFE Tube

Damaged & Faulty Items

Before you use the products or items that you have purchased, we strongly recommend that you visually inspect the items you have received for any visible damage. If any items look damaged, DO NOT use the product, and please get in touch with the Plasmics Support Team via support@ozrobotics.com.

What details should I provide to the Support Team?

  • The original invoice number of the order you want to return or the order number and  the item serial number, if applicable
  • Images of all damaged items that you have received
  • Images of the outer packaging the items were delivered in
  • A detailed message of your reason for contacting the Support Team

DO NOT use the item before contacting the Support Team. Our support team will then advise you further regarding the troubleshooting steps required or further details.

Please note that the Support Team may ask for further images, videos, files, or details to assist with your inquiry. Please note you will be responsible for all return shipping charges. We strongly recommend that you use a trackable method to mail your return. Once a compliant return has been accepted, Plasmics GmbH will aim to process the return in 5 working days. However, additional time may be required due to operational constraints.

Should an unauthorized or unlabelled return arrive at Plasmics GmbH, please be aware that this will affect the processing time of the return significantly. Unfortunately, if a product has already been used, we cannot accept a return as this doesn’t enable us to sell the product as new. However, please refer to our warranty policy if your item develops a fault.

Warranty Policy:  Plasmics GmbH warranty covers any defects in material and artistry for two years from purchase. Plasmics GmbH is not liable for damages, in particular consequential damages, which result from:

  • Modification of the hotend by the operator without approval by Plasmics GmbH
    • e.g., unapproved cable extensions
    • e.g., using an alternative heat sink, causing the cable and thermocouple to be bent or kinked beyond the dimensions.
  • Modification of the software by the operator without approval by Plasmics GmbH
  • Operating the hotend with safety devices not functioning properly
  • Operating the hotend when the system is not being used for its intended purpose
  • Failure to observe the information and safety instructions in the operating manual
  • Failure to carry out maintenance by the maintenance specifications
  • Effects of force majeure (earthquakes, floods, etc.)

Such damages are expressly excluded from the warranty. If you have any questions concerning our warranty or return policy, please get in touch with us at support@ozrobotics.com, including:

  • Date of purchase
  • Purchase order number
  • Serial number of the concerned item

Please add any clear pictures or videos of the defective parts or issues. Note that any incomplete request will not be processed. If, after receiving the product, Plasmics GmbH realizes that the warranty does not cover it, we reserve the right to charge the customer for the service and repair. The return policy for purchases made from a reseller’s website is subject to the reseller’s return policy. Please reach out to the reseller for more information.

Refunds:  After receiving your return and inspecting the condition of your item, we will process your return or exchange. Please allow at least ten working days from receiving your item to process your return or exchange. We will notify you by email when your return has been processed.

Delivery/customs fees:  If the shipping is within the EU – the price will include VAT, so there are no additional costs.

Outside of the EU – Orders are subject to customs and duty fees as defined by the country of import. Duties will be determined by the country of import of your order based on product value.

Additional information

Weight 1 lbs
Dimensions 10 × 8 × 3 in

Product Datasheet and Manual

If applicable, the Product Documentation such as Datasheet, Brochure, Reference Materials, CAD Design, STP Files, Manuals, and Tutorials will be available for download upon purchase from the My Account as needed. On the checkout page, please create an account to download product-related files upon purchase. You won’t be able to download otherwise.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Plasmics is an Austrian startup specializing in developing the next generation of 3D printing solutions. We strive to be known for innovation and quality. We have a strong team with endless ideas on how to improve 3D printing and how to create perfect 3D printers for various industries.

Privacy Policy

We are very delighted that you have shown interest in our enterprise. Data protection is of a particularly high priority for the management of the Plasmics GmbH.

The use of the Internet pages of the Plasmics GmbH is possible without any indication of personal data; however, if a data subject wants to use special enterprise services via our website, processing of personal data could become necessary. If the processing of personal data is necessary and there is no statutory basis for such processing, we generally obtain consent from the data subject.

The processing of personal data, such as the name, address, e-mail address, or telephone number of a data subject shall always be in line with the General Data Protection Regulation (GDPR), and in accordance with the country-specific data protection regulations applicable to the Plasmics GmbH. By means of this data protection declaration, our enterprise would like to inform the general public of the nature, scope, and purpose of the personal data we collect, use and process.

Furthermore, data subjects are informed, by means of this data protection declaration, of the rights to which they are entitled. As the controller, the Plasmics GmbH has implemented numerous technical and organizational measures to ensure the most complete protection of personal data processed through this website. However, Internet-based data transmissions may in principle have security gaps, so absolute protection may not be guaranteed.

For this reason, every data subject is free to transfer personal data to us via alternative means, e.g. by telephone.

Controller for the purposes of the General Data Protection Regulation (GDPR), other data protection laws applicable in Member states of the European Union and other provisions related to data protection is: ​

Plasmics GmbH

Zeltgasse 3/1

1080 Wien

Österreich ​

Phone: +43 676 454 08 03

Email: office@plasmics.com

Website: https://plasmics.com/ ​

VAT: ATU74087837

Registration ID: 501391s

Shipping Policy

We ship your product using DHL Express with tracking.
We have the right to deny shipping in certain countries that our products are not certified for.

Where products are in stock, these will be dispatched within 5 working days from the day you place an order to purchase the product.

Dispatch of back-ordered or pre-ordered products will be confirmed once the products are in stock. After that, products will be dispatched within 5 working days from the day that confirmation of products in stock is sent.

Order Tracking Information

You will receive a notice of shipment email with tracking information upon the shipment of your order.

Delivery/customs fees

If the shipping is within the EU - the price will be including VAT, so no additional costs.

Outside of the EU - orders are subject to customs and duty fees as defined by the country of import. Duties will be determined by the country of import of your order based on product value.

Return Policy

Damaged & Faulty Items

Before you use the products or items that you have purchased, we strongly recommend that you visually inspect the items you have received for any visible damage.

If any of the items look to be damaged, DO NOT use the product and please contact the Plasmics Support Team via support@plasmics.com.

What details should I provide to the Support Team?

  • The original invoice number of the order you want to return, or the order number and  the items serial number if applicable
  • Images of all damaged items that you have received
  • Images of the outer packaging the items were delivered in
  • A detailed message of your reason for contacting the Support Team

DO NOT use the item before contacting the Support Team, our Support Team will then advise you further regarding the troubleshooting steps required or  further details. 

Please note that the Support Team may ask for further images, videos, files, or details to assist with your enquiry.

 

RETURN PROCESS

A return application should be initiated before you return the item and sent to us via Customer Support. The e-mail must include:

 

  • The original invoice number of the order you want to return, or the order number and  the items serial number if applicable

 

Our Customer Support will provide you with Return Merchandise Authorization (RMA) number. After receiving an RMA number, return the item to the following address:

 

Plasmics GmbH

Attn: Returns

RMA #

Zeltgasse 3/1, 

1080 Vienna

 

Please note, you will be responsible for all return shipping charges. We strongly recommend that you use a trackable method to mail your return.

 

Once a compliant return has been accepted, Plasmics GmbH will aim to process the return in 5 working days, however, additional time may be required due to operational constraints.

 

Should an unauthorized or unlabelled return arrive at Plasmics GmbH, please be aware that this will affect the processing time of the return significantly.

Unfortunately, if a product has already been used, we are unable to accept a return as this doesn't enable us to sell the product as new. 

However, if your item develops a fault, please refer to our warranty policy.

 

WARRANTY POLICY

 

Plasmics GmbH warranty covers any defects in material and workmanship for a period of 2 years from purchase. 

 

Plasmics GmbH is not liable for damages, in particular also consequential damages, which result from:

 

  • Modification of the hotend by the operator without approval by Plasmics GmbH
    • e.g. unapproved cable extensions
    • e.g. use of an alternative heat sink, causing cable and thermocouple to be bent or kinked beyond the dimensions.
  • Modification of the software by the operator without approval by Plasmics GmbH
  • Operating the hotend with safety devices not functioning properly
  • Operating the hotend when the system is not being used for its intended purpose
  • Failure to observe the information and safety instructions in the operating manual
  • Failure to carry out maintenance in accordance with the maintenance specifications
  • Effects of force majeure (earthquakes, floods, etc.)

 

Such damages are expressly excluded from the warranty.

 

If you have any questions concerning our warranty or return policy, please contact us at support@plasmics.com including:

 

  • Date of purchase
  • Purchase order number
  • Serial number of the concerned item

 

Please add any clear pictures or videos of the defective parts or issues. 

 

Note that any incomplete request will not be processed.

 

If after receiving the product, Plasmics GmbH realizes that it is not covered by the warranty, we reserve the right to charge the customer for the service and repair. 

 

Purchases from an authorized reseller of Plasmics GmbH

 

The return policy for purchases made from a reseller’s website is subject to the reseller’s return policy. Please reach out to the reseller for more information.

 

Refunds

 

After receiving your return and inspecting the condition of your item, we will process your return or exchange.

 

Please allow at least 10 working days from the receipt of your item to process your return or exchange. We will notify you by email when your return has been processed.

Shipping costs

Region / Country State Postcode Cost
United States (US) Any Any $25.00
Mexico Any Any $25.00
Canada Any Any $25.00
Australia Any Any $45.00
Singapore Any Any $30.00
United Arab Emirates Any Any $45.00
Saudi Arabia Any Any $45.00
United Kingdom (UK) Any Any $25.00

Make money through one of the following partnerships with Oz Robotics.

 – Become An Affiliate
– Become A Freelancer
– Become A Supplier

Related Products