AudioB I2S V4 Bluetooth Digital Audio Receiver Module – I2S slave
If you want to build a digital Bluetooth amplifier board, the AudioB I2S Bluetooth audio receiver module is a good choice for your project. This is a Bluetooth 5.1 stereo receiver module with an I2S digital output, and the music resampling frequency is 48KHz. Apt-X supported. We break out pins to 2×10 2mm space male pins. You can easily integrate it into your project. This module has a U.FL connector. You can connect an external 2.4G antenna to it using a U.FL-to-SMA cable. This module has a JST port; you can connect our RGB Matel Push Button to it with a cable, then use one button to control the multipoint (party mode) amplifier pairing.
The module’s PIN7,8,9,10 are I2S output pins; I2S voltage is 3.3V.
- 7 – GND
- 8 – BCK: I2S synchronous data clock; it’s a 2.304 MHz square-wave signal.
- 9 – SDÂ Â Â I2S synchronous data output.
- 10 – LRCKÂ Â I2S word select, 48KHz. 1 – Left channel data, 0 – Right channel data.


How to use:
Single module
- Double-click S1, then set the module into pairing mode. (Voice: Pairing, blue LED flash 2 times per cycle.)
- Now, your smartphone will be able to find a new Bluetooth device named “AudioB I2S” and connect to it. (Voice: Pairing successful, blue LED flash 1 time per cycle.)
- You can play music now.
Party connection (multiple modules can be connected)
Transmitter Module
- Power up module, blue LED flashes 3 times per cycle.
- Double-click S1, then set the module into pairing mode. (Voice: Pairing, blue LED flash 2 times per cycle.)
- Now, your smartphone will be able to find a new Bluetooth device named “AudioB I2S” and connect to it. (Voice: Pairing successful, blue LED flash 1 time per cycle.)
- You can play music now. If you use only one module, you don’t need to follow the steps below.
- Single-click S1 to switch the module between transmitter and receiver modes. Stop clicking when you hear the voice. In broadcast mode, the module is set to transmitter mode; the Red LED is ON.
Receiver Module
- Power up another module, blue LED flashes 3 times per cycle.
- Single-click S1 to switch the module between transmitter and receiver modes. Stop clicking when you hear the voice. Broadcast audio is enabled; this means the module is set to receiver mode. Green LED is ON
- Press and hold the S1 button about 1 second on the transmitter module, press and hold the S1 button about 1 second on the receiver module; the transmitter module will auto-search (30 seconds) the receiver module. Both the transmitter and receiver modules will be connected. (Voice: pairing successful)
- The receiver module will have music out now.
- If a new module wants to join as a receiver, repeat steps 1 to 3 on the new module.
- If a receiver wants to quit, click the S1 button on that module to set it into transmitter mode.
If you connected the RGB Matel Push Button to the module with a cable, it works the same as the S1 button on the module.
Features:
- Bluetooth 5.1
- I2S digital output
- Sampling Rate: 48KHz
- Bit per Sample: 16 bit
- Left Justified
- Justified Data 1 bit delay
- Apt-X supported
- Low power consumption: 5mA@5V
- HFP V1.6
- HSP V1.2
- A2DP V1.2
- AVRCP v1.4
- Support for smartphone applications (APPs)
Only logged in customers who have purchased this product may leave a review.
Shipping Policy
We ship directly from the country where the product is made, such as China, Italy, or Taiwan, helping you avoid or pay lower tariffs.
Fast Delivery! We ship via FedEx, UPS, DHL, and USPS because they're fast, reliable, and easy to track. We process orders within 24 hours, and delivery may take 4-7 working days, depending on your location. We'll email you the tracking number once your order is shipped. We sell in USD.
Shipping Costs: For some industrial products, such as heavy wheels and CNC machines, we calculate shipping costs by weight rather than quantity. To reduce shipping costs for orders with multiple items, please email us at sales@ozrobotics.com before placing your order. We show shipping rates on the product page under the SHIPPING tab. To view the shipping cost for your country, click 'Add to Cart' on the product page.
Return Policy
5 Hours: Mistakes happen when ordering, so you have 5 hours to request a refund for any reason, including if you don’t want to pay the tariff. However, Stripe will not refund you their processing fee if you cancel your order.
All Sales Are Final: After 5 hours, we cannot cancel your order or issue a refund because order cancellations incur multiple transaction processing fees from Stripe and PayPal, additional shipping fees, and reverse tariff payments, which are costly and time-consuming. For technical issues, we will be happy to assist you in resolving problems and provide a replacement if you can prove that the product has a manufacturing defect.
Exchange Policy: We want you to be happy with your new purchase. However, once you have used the product, we cannot issue a refund. However, we will offer an exchange for a product with irreversible manufacturing defects or technical issues. If you purchased the wrong product, then you, as the customer, will be responsible for the re-shipping fees and tariffs. If the product you purchased is defective, email us at support@ozrobotics.com with photos or a video of the faulty parts so we can evaluate the issue before arranging a replacement.
Privacy Policy
Oz Robotics does not collect personal data from customers or visitors; it collects only the data shown on the user profile screen for registered users.
Terms and Conditions
If you were not at home or at your shipping address during the parcel delivery: It is not our or the supplier's fault; if the shipping/delivery company could not deliver your parcel because you, the customer, were not at home or at your delivery address on the delivery date/time, and as a result, the carrier returned your parcel to the manufacturer from where it was shipped. Please note that we do not accept excuses; you will therefore have to pay the re-shipping fee and the tariff for any re-shipment request. In such a case, we will not issue a refund. Please always check your spam folder to ensure you receive emails from Oz Robotics and shipping companies.
Product Warranty: Our warranty covers only product-related problems caused by manufacturing defects. It does not cover problems resulting from faulty repair attempts, customer accidents, or misuse.
Reviews
There are no reviews yet.