Adeept Ultrasonic Distance Sensor Starter Kit for Raspberry Pi LCD1602, Motor, C, and Python Code
This is an Ultrasonic Distance Sensor Starter Learning Kit for Raspberry Pi. The kit contains over 150 components and electronic modules, divided into 25 species. In addition, we have carefully prepared a guidebook(113 pages PDF) and supporting experimental code routine for you to learn. The guidebook includes 18 experiments, and the code is divided into two versions(C and Python).
This kit is attractive if you want to learn the basics of electronics and Linux programming. In learning this kit, you will get excellent technical support. Furthermore, by learning this kit, you will be fully aware of the beautiful world of electronics and the fun of DIY.
Features:
Fast, free shipping with a tracking number. A detailed user manual/guidebook(PDF) with 18 lessons and two versions of code(Python and C) are provided; it is easy for you to learn Raspberry Pi, C, and Python programming. After you purchase, email us the title “require files for RPi Ultrasonic starter kit,” and then we will show you how to access these documents.
- Quick-responding technical support for free.
- The re-designed case is very beautiful, and it is a wonderful gift for children.
- Raspberry Pi is NOT included.
Lessons:
- About the Raspberry Pi
- Raspberry Pi Pin Numbering Introduction
- Raspberry Pi GPIO Library Introduction
- How to Use wiringPi and RPi.GPIO
- Lesson 1 Blinking LED
- Lesson 2 Active Buzzer
- Lesson 3 Tilt Switch
- Lesson 4 Controlling an LED by Button
- Lesson 5 Relay
- Lesson 6 LED Flowing Lights
- Lesson 7 Breathing LED
- Lesson 8 Controlling an RGB LED with PWM
- Lesson 9 7-Segment Display
- Lesson 10 4-Digit 7-Segment Display
- Lesson 11 LCD1602
- Lesson 12 A Simple Voltmeter
- Lesson 13 Measuring Distance
- Lesson 14 Photoresistor
- Lesson 15 Thermistor
- Lesson 16 Controlling an LED Through LAN
- Lesson 17 DC Motor
- Lesson 18 How to Control A Servo
Package List:
- 1x DC Motor
- 1x Servo
- 1x Relay
- 1x Ultrasonic distance sensor
- 1x Ultrasonic distance sensor holder
- 1x L9110 motor driver
- 1x LCD1602
- 1x ADC0832
- 1x 74HC595
- 1x 7-Segment Display
- 1x 4-bit 7-segment display
- 1x Light Sensor (Photoresistor)
- 1x Analog Temperature Sensor (Thermistor)
- 1x 40 pin GPIO Extension Board
- 1x 40 pin GPIO Cable
- 1x Breadboard Power Supply Module
- 1x Active Buzzer
- 1x Tilt switch
- 2x Switch
- 1x RGB LED
- 4x Red LED
- 4x Green LED
- 4x Yellow LED
- 4x Blue LED
- 16x Resistor(220Ω)
- 10x Resistor(1kΩ)
- 5x Resistor(10kΩ)
- 4x Capacitor (104)
- 2x Capacitor (10uF)
- 4x Button (large)
- 4x Button (small)
- 1x Button cap (red)
- 1x Button cap (white)
- 2x Button cap (blue)
- 2x NPN Transistor (8050)
- 2x PNP Transistor (8550)
- 2x 1N4148 Diode
- 2x 1N4001 Diode
- 2x Potentiometer (10KΩ)
- 1x Breadboard
- 40x Male to Male Jumper Wires
- 20x Male to Female Jumper Wires
- 1x Header (40pin)
- 1x Band Resistor Card
- 1x Project Box
Reviews
There are no reviews yet.