Bluetooth Low Energy BLE Module MDBT42Q-192KV2

$5.98

Model No: MDBT42Q-192KV2

  • Nordic nRF52810 SoC Solution
  • A recommended 3rd-party module by Nordic Semiconductor.
  • BT5.2 & BT5.1 & BT5 & BT4.2 Bluetooth Specification Certified.
  • Certifications: FCC, IC, CE, Telec (MIC), KC, SRRC, NCC
  • 32-bit ARM® Cortex™ M4 CPU
  • 192kB Flash Memory / 24kB RAM
  • RoHS & Reach Compliant.
  • Dimension:10 x 16 x 2.2 mm
  • 32 GPIO
  • Chip Antenna
  • Interface: SPI, UART, I2C, I2S, PWM
  • Highly flexible multiprotocol SoC ideally suited for Bluetooth® Low Energy, ANT+, and 2.4GHz ultra-low-power wireless applications.

Bluetooth Low Energy BLE Module MDBT42Q-192KV2

Raytac’s MDBT42Q-192KV2 and MDBT42Q-P192KV2 are BT5.2, BT5.1, BT5, and BT4.2 stack (Bluetooth Low Energy or BLE) modules designed based on the Nordic nRF52810 SoC solution, which incorporates GPIO, SPI, UART, I2C, and PWM interfaces for connecting peripherals and sensors.

Specifications

  • 32-bit ARM® Cortex™ M4 CPU
  • Supply: 1.7V – 3.6V
  • Memory: 192kB Flash Memory
  • RAM: 24kB
  • Tx Power: +4 dBm @ 7.5mA, 0 dBm @ 5.3mA
  • Rx Sensitivity: -96 dBm @ 5.4mA
  • Flexible and configurable 32 GPIO (8 analog inputs)
  • Interfaces: UART / I2C / SPI / PWM
  • Full set of digital interface all with Easy DMA including ‧1 x Hardware SPI master; 1 x Hardware SPI slave ‧1 x two-wire master; 1 x two-wire slave ‧1 x UART (CTS / RTS) ‧PDM for digital microphone
  • 12-bit / 200KSPS ADC
  • 128-bit AES ECB / CCM / AAR co-processor
  • Low cost external crystal 32MHz ± 40ppm for Bluetooth ; ± 50ppm for ANT Plus
  • Low-power 32MHz crystal and RC oscillators
  • Operating Temp: -40°C to +85°C
  • SPQ: 88/tray; Less than SPQ is workable (Polybag ship)
More From: