Module Dual-Band Sub 1GHz and 2.4GHz Multichannel Radio Transceiver 20dBm RC-CC1352P

$20.00

The RC-CC1352P module is based on the Texas Instruments CC1352P component.

Module Dual-Band Sub 1GHz and 2.4GHz Multichannel Radio Transceiver 20dBm RC-CC1352P

The RC-CC1352P module is based on the Texas Instruments CC1352P component. The CC1352P device is a multiprotocol Sub-1 and 2.4-GHz wireless MCU targeting Wireless M-Bus, IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), Thread, Zigbee®, KNX RF, Wi-SUN®, Bluetooth® 5 low energy, and proprietary systems.

N.2 Versions Available:

  • RC-CC1352P
  • Freq. : 868MHz/915MHz

The CC1352P device is a member of the CC26xx and CC13xx family of cost-effective, ultra-low power, 2.4-GHz, and Sub-1 GHz RF devices. Very low active RF and microcontroller (MCU) current and sub-µA sleep current with up to 80KB of RAM retention provide excellent battery lifetime and allow operation on small coin-cell batteries and in energy-harvesting applications.

The CC1352P device combines a flexible, very low-power RF transceiver with a powerful 48-MHz Arm® Cortex®-M4F CPU in a platform supporting multiple physical layers and RF standards. A dedicated Radio Controller (Arm® Cortex®-M0) handles low-level RF protocol commands stored in ROM or RAM, thus ensuring ultra-low power and great flexibility. The low power consumption of the CC1352P device does not come at the expense of RF performance; the CC1352P device has excellent sensitivity and robustness (selectivity and blocking performance).

Sub 1GHz Parameters MIN TYP MAX UNIT
Supply Voltage 1.8 3.0 3.80 Volt
Supply Current RX mode 8.5 mA
Supply Current TX mode. 66.0 mA
Supply Current Standby Mode 1 µA
Operative Frequency 868/915 MHz
RF Power Output 50ohm +18 dBm
RF Sensitivity 50kbps -110 dBm
RF Sensitivity long range mode 2.5kbps -122 dBm
Data Rate (programmable parameter) 0,01 4 Mbit/s
Operating Temperature range -30 75 °C
2.4GHz Parameters MIN TYP MAX UNIT
Supply Voltage 1.8 3.0 3.80 Volt
Supply Current RX mode 8.5 mA
Supply Current TX mode 10 mA
Supply Current Standby Mode 0.1 µA
RF TX Power Output +3 dBm

Please refer to the CC1352P Texas Instruments datasheet for more information and details.

More From: