MYIR MYD-YG2LX Development Board Based on RENESAS RZ/G2L Processor
The MYD-YG2LX Development Board consists of a compact CPU Module MYC-YG2LX and a base board to provide a complete evaluation platform for RENESAS RZ/G2L Processors. These processors feature dual-core Arm Cortex-A55 operating at up to 1.2GHz, an embedded Cortex-M33 core operating at up to 200MHz, and an ARM Mali-G31-based 3D Graphics and Video CODEC Engine. Typical applications are industrial HMI, medical, industrial automation, power, display and control terminal, and other scenarios that require rich performance and low power.
Mechanical Parameters
- Dimensions: 150mm x 120mm (baseboard), 45mm x 43mm (SOM)
- PCB Layers: 6-layer design (baseboard) or USB Typpower supply, 10-layer design (SOM)
- Power supply: +12V/2A (baseboard) or USB Type-C power supply, 5V/1A (SOM)
- Working temperature:Â -40~85 Celsius (industrial grade)
(WiFi Module: -20~70 Celsius)
The MYD-YG2LX Controller Board (MYC-YG2LX SOM)
Processor
- RENESAS RZ/G2L processor (R9A07G044L23GBG)
–Â 1.2 GHz Dual-core ARM Cortex-A55
–Â 200 MHz ARM Cortex-M33
–Â 3D graphics functions (Arm Mali-G31)– Video codec (H.264)
Memory
- 1G/2G DDR4 (supports optional 4GB)
- 8GB eMMC (supports optional 4GB/16GB/32GB)
- 32KBÂ EEPROM
Peripherals and Signals Routed to Pins
- Power Management ICÂ (RAA215300)
- 164-pin stamp-hole (Castellated-Hole) and 58-pin LGA expansion interfaces
– 2 x RGMII
– 4Â x I2C
– 3Â x SPI
– 2Â x USB 2.0
– 1 x MIPI DSI
– 1 x MIPI CSI
– 1 x Parallel CSI
– 1 x RGB
– 2 x SCI
– 5 x SCIF
– 8Â x ADC
– 4Â x SSI
– 1 x SRC
– 2Â x CAN
– Up to 118 GPIOs
Note: the peripheral signals brought out to the expansion interface are listed in the maximum number. Some signals are reused. Please refer to the processor datasheet and pin-out description file.
The MYD-YG2LXÂ Development Board Base Board
- 1 x Power Jack
- 1 x Power Switch
- Serial ports
- – Debug serial port (TTL)
- – 3 x RS232
- USB
– 1 x USB2.0 Host ports
– 1 x USB2.0 OTG port
– 1 x M.2 socket for USB based 4G/5G LTE Module
– 1 x USB-based WiFi Module - 2 x SIM card slots
- 1 x Micro SD card slot
- 2 x Antenna Interfaces (one for WiFi and one for 4G/5G)
- 2 x 10/100/1000 Mbps Ethernet interface (RJ45)
- 1 x JTAG interface
- Video Input
– 1 x MIPI-CSI Interface (0.5mm pitch 24-pin FPC connector)
Supports MYIR’s MY-CAM003M Camera Module through J2 - Video Output
– 1 x HDMI Output Interface
– 1 x RGB Display interface (J24, 40-pin 0.5mm pitch FPC connector)Supports MYIR’s MY-LCD70TP-C LCD Module with a Capacitive Touch Screen through the LCD interface– 1 x LVDS Display interface (J6, 30-pin 0.5mm pitch FPC connector)
Supports MYIR’s MY-LVDS070C LCD Module with a Capacitive Touch Screen through the LCD interface - Audio Input and Output Interface
- 1 x 2.54mm 2 x 20-pin male expansion header
(J20, GPIO/TWI/UART, compatible with Raspberry PI standard 40-pin extension interface)
Supports MYIR’s MY-WIREDCOM RPI Module through J25 to extend RS485, RS232, and CAN functions - 3 x Buttons (one for Reset, one for Power On/Off, and one for USER)
OS Support: Linux 5.10
Reviews
There are no reviews yet.