MYIR MYD-LMX9X Development Board Based on NXP i.MX 93 Processor

$105.00$115.00

  • MYC-LMX9X SOM as Controller Board
  • NXP i.MX 9352 Application Processor based on 1.7 GHz Dual Arm Cortex-A55 and 250MHz Cortex-M33 Cores
  • 1GB/2GB LPDDR4, 8GB eMMC Flash, 32KB EEPROM
  • 2x USB 2.0 Host, 1x USB 2.0 OTG, 1x Micro SD Card Slot, CAN/RS485/RS232
  • 2x Gigabit Ethernet, 1x 4G/5G Module Interface, 1x WiFi Module
  • Supports HDMI and LVDS Display, Camera Interface (MIPI-CSI), Audio Input and Output
  • Ready to Run Linux 6.1 OS


Made In: China

Supplier: MYIR Tech SKU: MYIR i.MX 93 Development Board Categories: , Tags: , , , , , , More From:

MYIR MYD-LMX9X Development Board Based on NXP i.MX 93 Processor

The MYD-LMX9X Development Board is an advanced evaluation platform designed for the NXP i.MX 9352 processor. This processor boasts up to 1.7GHz Dual ARM Cortex-A55 and 250MHz Cortex-M33 cores, belonging to the esteemed NXP i.MX 93 family. It offers rapid and efficient ML inference alongside a comprehensive set of peripherals and high-performance application cores tailored for the automotive, industrial, and consumer IoT market segments. The board is ready to run Linux OS and supports an industrial operating temperature range of -40 to +85 Celsius.

Mechanical Parameters

  • Dimensions: 120mm x 150mm (baseboard), 37mm x 39mm (SOM)
  • PCB Layers: 6-layer design (base board), 10-layer design (SOM)
  • Power supply: +12V/2A (baseboard), 5V/1A (SOM)
  • Working temperature: -40~85 Celsius (industrial grade)
    (WiFi Module: -20~70 Celsius)

The MYD-LMX9X Controller Board (MYC-LMX9X)

Processor

  • NXP i.MX 9352 Processor
    – Up to 1.7 GHz Dual-core ARM Cortex-A55 CPU
    – 250MHz Real-time ARM Cortex-M33 co-processor
    – Up to 0.5 TOPS Arm® Ethos™ U-65 microNPU

Memory

  • 1GB/2GB LPDDR4
  • 8GB eMMC (supports 4GB/16GB/32GB)
  • 32KB EEPROM

Peripherals and Signals Routed to Pins

  • Power Management IC (PCA9451AHNY)
  • 218-pin LGA Expansion Interface
    – 2x RGMII
    – 2x USB2.0
    – 8x UART
    – 2x CAN FD
    – 8x I2C
    – 2x I3C
    – 8x SPI
    – 1x MIPI-DSI
    – 1x LVDS
    – 1x RGB
    – 1x MIPI-CSI
    – 1x Parallel CSI
    – 3x SAI
    – 1x SPDIF
    – 4x ADC
    – 1x JATG
    – Up to 87x GPIOs
    Note: the peripheral signals brought out to the expansion interface are listed in the maximum number. Some signals are reused. Please refer to the processor datasheet.

The MYD-LMX9X Development Board Base Board

Serial ports
– 3x Debug interfaces (one for Cortex-A55 cores, one for Cortex-M33 core, one for JTAG)
– 1x RS232
– 1x RS485 (with isolation)

USB
– 2x USB2.0 Host ports
– 1x USB2.0 OTG port
– 1x M.2 socket for USB-based 4G/5G module

  • 2x SIM card slots
  • 1x 10/100/1000 Mbps Ethernet interface (RJ45)
  • WiFi Module
  • 2x external antenna connectors (one for WiFi and one for 4G/5G)
  • 1x CAN FD interface (with isolation)
  • 1x Micro SD card slot
  • 1x MIPI-CSI Camera interface (J20, 0.5mm pitch 24-pin FPC connector)
  • 1x LVDS LCD interface (J21, 0.5mm pitch 40-pin FPC connector)
  • 1x RGB LCD interface (J23, 0.5mm pitch 50-pin FPC connector)
  • 1x HDMI Display interface
  • Audio Input/Output
  • 3x Buttons (one for RESET, one for ON/OFF and one for USER)

OS Support: Linux 6.1.36

Additional information

Specifications

8GB eMMC, 1GB LPDDR4, 8GB eMMC, 2GB LPDDR4

Product Datasheet and Manual

If applicable, the Product Documentation such as Datasheet, Brochure, Reference Materials, CAD Design, STP Files, Manuals, and Tutorials will be available for download upon purchase from the My Account as needed. On the checkout page, please create an account to download product-related files upon purchase. You won’t be able to download otherwise.


MYIR Tech is a global ARM hardware and software tool provider that designs solutions for embedded applications. The company provides various products, including development boards, single board computers, and SOMs, designed to help engineers evaluate, prototype, system integrate, or create new applications. MYIR products are used widely in industrial control, medical devices, consumer electronics, telecommunication systems, human-machine interfaces (HMI), and other embedded applications. MYIR has an experienced team that provides custom design services based on ARM processors to help customers realize their ideas.

Shipping Policy

Please check your SPAM folder to ensure you accept emails from OzRobotics.com to receive your tracking number and download product-related files.

WE SHIP WORLDWIDE: We primarily ship via FedEx, UPS, DHL, and USPS because they’re reliable, fast, and easily trackable. We usually ship within two to three business days after the full payment. Standard delivery generally occurs within 5 to 7 business days after the shipping date. However, the delivery may take about 7 to 10 business days, depending on the shipping destination, logistics, weather conditions, product weight, size, or shipping company distribution structures.

SHIPPING COSTS: For some industrial products, e.g., heavy wheels, CNC machines, etc., the shipping cost is calculated based on the product weight, not quantity. To benefit from lower shipping costs for orders with multiple items, please contact us at sales@ozrobotics.com. Our shipping rates are listed clearly on each product page under the SHIPPING tab. Additionally, to see the shipping cost for your country, add the item to the Shopping Cart; you will see the shipping cost based on your Country and Location.

CUSTOMS and TARIFFS: While not all products require a tariff, some products may require a minimal tariff if applicable in your country. The total amount for your order does not include a customs fee/tariff. The United States Customs and Border Protection (CBP) deducts import tax, or customs duty, on goods valued over $800 USD from customers located in the US. A tariff belongs to the buyer when applicable. Why don't we add tariffs to the product's retail price? - If all countries deducted the same tariff amount, we would have added the tariff amount to the product price. However, we do not do that because each country charges a different amount, while some do not even charge. Therefore, we can't add any tariff to the product's retail pricing. Oz Robotics, manufacturing partners, or Suppliers are not responsible for tariffs. Please check the "Made In:" and "Brand:" labels on the product page to see the product's origin. The total amount for your order does not include any duties, import taxes, customs fees, and GST/VAT. The buyer must pay all import duties. If you choose not to pay the tariff and parcel returns, there will not be any refund. Please click here to see more on Tariffs.

Return Policy

WITHIN 5 HOURS: Mistakes happen when ordering, so you have 5 hours to request an order cancellation, but we cannot refund the PayPal or Stripe Processing fee because they do not refund us.

AFTER 5 HOURS: After 5 hours, your order has either been shipped, prepared to ship, or custom-made. If you still want to cancel your order after 5 Hours, we will deduct 30% of the total for restocking + PayPal or Stripe processing fees and the Return Shipping cost for unopened packages.

AFTER RECEIVING YOUR ORDER: If you decide not to keep your order after it arrives, we will deduct 80% of the total if we find it refundable after a review. Please see our Refund and Replacement Policy

EXCHANGE POLICY: Oz Robotics wants you to be happy with your new purchase. However, we abide by the exchange policy of our suppliers because we do not manufacture these products; our suppliers do. Once you use the product, our supplier(s) and we have the right not to issue a refund. Still, we will offer an exchange for wrongly purchased items or products with serious and irreversible defects or technical problem(s). The buyer will pay the shipping fee for wrongly purchased products or similar issues. If the product you purchased is defective, please email us at support@ozrobotics.com with photos or a video of the defective parts to evaluate before you send it. Click HERE for more on Refund and Replacement Policy

REFUND POLICY: Oz Robotics accepts refunds on a minimal basis unless there is a manufacturing defect. For electronic items, returns are only accepted on devices with serious and irreversible problems; meanwhile, the customer must apply for the returns within seven days of delivery. Before a refund acceptance, please include images or a video and any other proof of the defect. However, we abide by the exchange policy of our suppliers because we do not manufacture these products. For more info please visit Refund and Replacement Policy.

Other than our supplier's default policy, once a return is agreed upon, you can ship your defective item to the provided return address that you should receive from us first. Please ship the order in original packaging with all the accessories and additional parts. If the Required Parts are not sent back, they will be billed for or expected to be shipped later. And only once all items have arrived will our staff check the returned product for testing. Include in your package a signed letter stating the reason for your return, the original receipt, proof of defect, images, a video, etc. It will help us to speed up the process on your behalf.

The purchaser (customer/buyer) is responsible for all shipping costs when returning an item. However, upon receiving the returned order, we will assess the product. If it is determined that there is, in fact, a manufacturing defect, then we will refund the shipping costs as well as repair or replace or refund the full amount to the purchaser if the product is not fixable.

If you wish to return an unused product, please do so within seven days from the ship date for a refund on the purchase price minus shipping and handling. Refunds will be credited to the original credit card used for payment 24-48 HOURS after receiving the product back. We will charge a 80% of the total for restocking + PayPal or Stripe processing fees and the Return Shipping cost for unopened packages.

Once your return is received and inspected, and if you agree to a refund, refunds will be credited to the original credit card used for payment in 24-48 hours. Please note that we will charge an 80% restocking fee once you return a product without any defect.

Once your refund is processed, PayPal will return the money to the card used. It may take at least five business days (depending on the bank and credit company) before your refund is posted in your bank account and statements. Contact Us if you have not received your refund after five business days.

Do not return your product to our New York office. For any exchange or refunds, please email us first at support@ozrobotics.com for us to provide you with the steps that need to be followed. Any product you return must be in the same condition you received and returned in the original packaging without being used. Please keep the original receipt. More on Refund and Replacement Policy.

Shipping costs

Region / Country State Postcode Cost
Africa Any Any $44.00
Asia Any Any $26.00
Europe Any Any $31.00
North America Any Any $31.00
Oceania Any Any $26.00
South America Any Any $39.00
Everywhere else China Any Free shipping