TSA5003 – Bluetooth Audio Transmitter with Microphone Input – Wireless Intercom Module

$28.95

This is a compact Bluetooth 5.2 audio transmitter with microphone input. It can be used to Build a wireless intercom or broadcasting system. TSA5003 can pair with a Bluetooth headset or audio amplifier board (HFP enabled). Once paired with a Bluetooth headset, it can achieve Bluetooth point-to-point calling. It becomes a wireless broadcasting system once paired with a Bluetooth audio amplifier (HFP enabled).

TSA5003 – Bluetooth Audio Transmitter with Microphone Input – Wireless Intercom Module

This is a compact Bluetooth 5.2 audio transmitter with microphone input. It can be used to Build a wireless intercom or broadcasting system. TSA5003 can pair with a Bluetooth headset or audio amplifier board (HFP enabled). Once paired with a Bluetooth headset, it can achieve Bluetooth point-to-point calling. It becomes a wireless broadcasting system once paired with a Bluetooth audio amplifier (HFP enabled).

MFB Button:

  • Long press 5 seconds turn TSA5003 ON/OFF.
  • Double-click into searching mode. It will search Bluetooth slave devices.

How to use it?

  1. Connect your speaker/microphone to this TSA5003 board.
  2. Keep your TSA5003 Bluetooth transmitter and Bluetooth receiver device within 5m.
  3. Turn on your Bluetooth receiver device and keep it in pairing mode
  4. Turn on your TSA5003 Bluetooth transmitter, press the MFB button for about 5 seconds, Then double click the MFB button->blue and red LED light fast blink. Now, the transmitter is in pairing mode and searches the receiver device automatically, finishing pairing and connecting.
  5. After connecting successfully, the blue LED will stay on.
  6. Your voice can now be sent to the receiver device, and you can also receive voice from the receiver device.

If TSA5003 fails, find the new Bluetooth device. The blue LED slowly blinks (2Hz). Please check your Bluetooth receiver and make sure it’s in pairing mode.

Note: This Bluetooth audio transmitter perfectly works with our Bluetooth amplifier boards.

Features:

  • Bluetooth v5.2 specification support
  • aptX, aptX Low Latency, SBC and AAC
  • Bluetooth 5+EDR
  • Bluetooth protocol: A2DP
  • Output power: ClassII
  • QTIL’s proximity pairing and QTIL’s proximity connection
  • Dimensions: 50x40x10mm
  • Weight: 10g

Shipping List:

  • 1 x TSA5003 audio transmitter
  • 1 x Antenna
  • 1 x JST XH Jumper 2 Wire -2.54mm
  • 1 x JST XH Jumper 4 Wire -2.54mm
More From: