2 x 8 Watt Class D Bluetooth Audio Amplifier Board – TSA3111B Apt-X

$24.95

TSA3111 is designed for factories or DIY users. The JST connectors are designed for the Bluetooth/LINE IN select switch and audio input port. So, users can install this amplifier board in a box and connect an external switch and RCA/Mono plug to make their audio amplifier.

2 x 8 Watt Class D Bluetooth Audio Amplifier Board – TSA3111B (Apt-X)

TSA3111 is designed for factories or DIY users. The JST connectors are designed for the Bluetooth/LINE IN select switch and audio input port. So, users can install this amplifier board in a box and connect an external switch and RCA/Mono plug to make their audio amplifier.

Features

    • Size: 4.8cm x 8cm
    • Apt-X supported
    • External mute control port
    • Working voltage: DC8V-16V
    • Over/under voltage protection
    • Over-current protection
    • Over-temperature protection
    • Bluetooth 4.0

TSA3111 comes with a new AudioB plus Bluetooth module that supports Apt-X. It has perfect class-D architecture (Based on TPA3110D2), and every channel has an 8W power output. Any DC8V-16V power supply can power this board, which can be used to drive any 4Ω or 8Ω passive speakers.

Applications

  • Personal computer
  • Desktop amplifier
  • Microphone preamplifier
  • Home DIY
  • Vending machine, Lifts
  • Interactive kiosks

It’s perfect for your Hi-Fi application, and the audio source can be cable input or Bluetooth. You may wish to pair it with a mobile phone or a computer (etc.). Power the amplifier board. Use your phone or PC (etc.) to search for a new Bluetooth device. The module will appear as “BT Speaker.” You don’t need a PIN; pair it, and then you can play music.

More From: