Adeept Raspberry Pi with Pre-Soldered Pico Starter Kit with Breadboard and Jumpers, LEDs
This Raspberry Pi Pico Expansion Kit includes Raspberry Pi Pico with Pre-Soldered Header and Raspberry Pi Pico Expansion Board. Jumper Wires, LEDs, Resistors, and other accessories. The Pico Expansion Board has built-in 4x WS2812 RGB LEDs, 1x buzzer, 1x photoresistor, and 1x thermistor, and the expansion board also has 18x PH2.0 sensor interfaces. You can easily connect the sensors you need through our jumper wires.
Features:
- This Raspberry Pi Pico Expansion Kit includes Raspberry Pi Pico with Pre-Soldered Header, Raspberry Pi Pico Expansion Board, Jumper Wires, LEDs, Resistors, and other accessories.
- Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces. It incorporates Raspberry Pi’s RP2040 microcontroller chip, with a dual-core Arm Cortex M0+ processor running up to 133 MHz, embedded 264KB of SRAM and 2MB of onboard Flash memory, as well as 26x multi-function GPIO pins.
- The Pico Expansion Board has built-in 4x WS2812 RGB LEDs, 1x buzzer, 1x photoresistor, and 1x thermistor; the expansion board also has 18x PH2.0 sensor interfaces. You can easily connect the sensors you need through our jumper wires.
- Circuit Schematics and C++ and Python code are provided.
- We provide a basic tutorial, and you can visit the link on the box to download it; You can also email our technical support team for quick-response technical support.
About Raspberry Pi Pico:
Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces. It incorporates Raspberry Pi’s RP2040 microcontroller chip, with a dual-core Arm Cortex M0+ processor running up to 133 MHz, embedded 264KB of SRAM and 2MB of onboard Flash memory, and 26x multi-function GPIO pins.
Raspberry Pi’s C/C++ SDK or the MicroPython is available for software development. They’re also complete development resources and tutorials to help you get started easily and integrate it into end products quickly.
Package List:
- 1x Raspberry Pi Pico(Pin Headers are Pre-soldered)
- 1x Raspberry Pi Pico Expansion Board
- 1x Breadboard(400 Points)
- 1x Jumper Wires Set(Male to Male, Flexible, 65pcs)
- 20x Male to Female Dupont Wire
- 1x 2P XH2.54 Wire
- 6x 3P PH2.0 Wires
- 2x 4P PH2.0 Wires
- 2x 5P PH2.0 Wires
- 8x LED(Red, 5mm)
- 8x Resistor(220 ohms)
- 1x USB Cable
- 1x 3Pin Header
- 4x Copper Standoff
- 4x Screw
- 1x Screwdriver
Reviews
There are no reviews yet.