AudioB I2S Bluetooth Digital Audio Receiver Module – I2S master

$13.15

If you want to build a digital Bluetooth amplifier board, the AudioB I2S Bluetooth audio receiver module is a good choice for your project. This is a Bluetooth 5.0 stereo receiver module with I2S digital output and a music resampling frequency of 48KHz. This module supports Apt-X and is based on QCC3008. We breakout pins to 2×10 2mm spaced male pins. You can integrate it into your project easily. If you want a demo board, please buy our TSA7010 Digital Bluetooth Audio Receiver. It’s an AudioB I2S module + DAC board.

AudioB I2S Bluetooth Digital Audio Receiver Module – I2S master

If you want to build a digital Bluetooth amplifier board, the AudioB I2S Bluetooth audio receiver module is a good choice for your project. This is a Bluetooth 5.0 stereo receiver module with I2S digital output and a music resampling frequency of 48KHz. This module supports Apt-X and is based on QCC3008. We breakout pins to 2×10 2mm spaced male pins. You can integrate it into your project quickly. If you want a demo board, please buy our TSA7010 Digital Bluetooth Audio Receiver. It’s an AudioB I2S module + DAC board.

The module’s PINs 7, 8, 9, and 10 are I2S output pins with an I2S voltage of 1.8V.

  • 7 – GND
  • 8 – BCK: I2S synchronous data clock. It’s a 2.304MHz square wave signal.
  • 9 – SD: I2S synchronous data output.
  • 10 – LRCK: I2S word select, 48KHz. 1 – Left channel data, 0 – Right channel data.
  • Setting switch: We set it to I2S in the normal state. When you need to program the module, set it to SPI.

Note: 

  1. You need to set the on-board switch to SPI when you program the module.
  2. If you want to use this module on our digital audio amplifier boards, change it from an I2S master to an I2S slave.

Note:

  1. Quick press S2 to switch to the previous song; long press to reduce the volume.
  2. Quick press S3 to switch to the next song; long press to increase the volume.
  3. Press S1 to play or pause.
  4. If there is an audio output, the MUTE pin will be at a high level; otherwise, it will be at a low level.

Features:

  • Bluetooth 5.0
  • I2S digital output
  • Sampling Rate: 48KHz
  • Bit per Sample: 16-bit
  • Left Justified
  • Justified Data 1-bit delay
  • Apt-X supported
  • Low power consumption: 5mA@5V
  • HFP V1.6
  • HSP V1.2
  • A2DP V1.2
  • AVRCP v1.4
  • Support for smartphone applications (APPs)
More From: