GCAN-203 Bluetooth to CAN converter CANBlue Bluetooth-CAN Module
USBCAN-Modul 16 is a high-performance CAN-Bus communication interface card integrated with a 16-channel CAN interface. This model CAN card is compatible with the full-speed specification of a USB 2.0 Bus; using the USBCAN-Modul8 high-performance CAN interface card, the PC CAN can be quickly connected to the CAN-Bus network through a USB interface. USBCAN-Modul 8 high-performance CAN interface card supports XP, Win7, Win10, Linux, and other operating systems; we provide a complete application demonstration code (VC VB Net Delphi Labview C++Builder) for the convenience of users for application development.
Features
GCAN-203(CANBlue) is an industrial-grade CAN bus communication converter that integrates a standard CAN bus interface and uses Bluetooth to send CAN bus data to the terminal. Using the GCAN-203 module, users can access CAN nodes and read CAN bus data using handheld mobile terminals (mobile phone/PAD); for some CAN networks that are not easy to connect physically, using GCAN-203 modules to connect with CAN networks through wireless terminals for data exchange will be highly convenient. The module has been widely used to construct CAN bus network control nodes for data processing and data acquisition in CAN bus network fields such as fieldbus laboratory, industrial control, intelligent community, automotive electronic network, etc.
GCAN-203 intelligent protocol converter is a key tool for industrial bus transformation and wireless CAN data acquisition. The module is small, plug-and-play, and can be fixed using the standard DIN rail, making it easy to integrate into the existing system.
GCAN-203 innovative protocol converter is suitable for CAN bus low-speed data transmission applications, with a maximum transmission rate of 300 frames per second. Similarly, it not only adapts to basic CAN bus products but also meets the development of CAN bus products based on high-level protocols such as DeviceNet and CANopen.
Performance Characteristics
- CAN bus supports CAN2.0A and CAN2.0B frame formats and conforms to ISO/DIS 11898 specifications;
- CAN bus communication baud rate between 5kbps ~ 1Mbps arbitrary programmable;
- CAN bus interface adopts electrical isolation, isolation module insulation voltage: DC 1500V;
- Maximum data flow: 300 frames/second;
- Bluetooth usage 2.0;
- Use 9~30V DC power supply;
- Power supply current: 30mA 24V DC;
- Use the CANBlue Config to configure the working mode and parameters;
- Provide filtering function for data sent from the CAN end to the Bluetooth end;
- The matching card rail connector can be used and installed on the DIN card rail;
- Operating temperature range:-40 ℃ ~ 85 ℃;
Technical Specifications
| Connectivity | |
| CAN connector | Open terminal block |
| CAN interface | CAN 2.0A, CAN 2.0B, conform to ISO11898-2 |
| CAN baud rate | 5kbit/s to 1Mbit/s |
| Bluetooth interface | Bluetooth 2.0 |
| Isolation | DC 1500V electrical isolation |
| Physical | |
| Size(LxWxH) | 112 x 70 x 25 mm |
| Weight | approx.100g |
| Operating temperature | -40°C~85°C |
| Humidity | 15 to 95% non-condensing |
| Installation | DIN rail |
| EMC test | EN 55024:2011-09
EN 55022:2011-12 |
| Protection grade | IP 20 |
| Power supply | |
| Power Supply | 9~30V DC |
| Current | 20mA, 24V DC |
Typical Applications
- CAN system access that is not easily physically connected;
- Industrial field network data monitoring;
- CAN teaching application remote communication;
- CAN industrial automation control system;
- Low-speed CAN network data acquisition data analysis;
- CAN bus application systems, such as intelligent building control data broadcasting systems.
Functions
1. After installing the software, set the Display mode and Edit mode in HEX (figure 1.1)
2. Then scan the Bluetooth device to connect (the default password is 1234).
3. the receive/transmit data interface is shown in Figure 1.2 (Data conversion is below) when connected successfully.
Reviews
There are no reviews yet.