MYIR MYD-LT527 Development Board Based on Allwinner T527 Processor

$79.00$119.00

  • MYC-LT527 SOM as Controller Board
  • Up to 1.8GHz Allwinner T527 Octa-core ARM Cortex-A55 MPU with GPU
  • Neural Processing Unit (NPU) operating at up to 2 TOPs
  • 2GB/4GB LPDDR4, 16GB/32GB eMMC, 32Kbit EEPROM
  • UARTs, 1 x USB 3.0, 2 x USB 2.0, 2 x Gigabit Ethernet, 2 x CAN, WiFi/Bluetooth, Micro SD card Slot
  • 2 x MIPI-CSI, HDMI/Mini-DP/MIPI-DSI/LVDS, Audio Input/Output
  • Supports Linux, Android, and Ubuntu OS
  • Optional 7-inch LCD Module, Camera Module and RPI Module (RS232/RS485/CAN)


Ships From: China

Supplier: MYIR Tech SKU: MYIR T527 Development Board Categories: , Tags: , , , , , ,

MYIR MYD-LT527 Development Board Based on Allwinner T527 Processor

The MYD-LT527 Development Board is an advanced evaluation platform designed for the Allwinner T527 processor, which features an Octa-core ARM Cortex-A55 MPU operating at a maximum operating frequency of 1.8GHz. The board’s core component is the System-On-Module (SOM) MYC-LT527, which integrates the T527 CPU, 2GB/4GB LPDDR4, 16GB/32GB eMMC, 32Kbit EEPROM and a Power management IC (PMIC). Most I/O signals are routed to and from the CPU module via the 318-pin LGA expansion interface, providing a highly versatile baseboard.

Mechanical Parameters

  • Dimensions: 90mm x 120mm (baseboard), 45mm x 43mm (SOM)
  • PCB Layers: 6-layer design (base board), 12-layer design (SOM)
  • Power supply: 12V/3A (baseboard), 5V/3A (SOM)
  • Working temperature: -40~85 Celsius (industrial grade) or -20~70 Celsius (extended temperature)
    (WiFi/BT Module: -30~85 Celsius)

The MYD-LT527 Controller Board (MYC-LT527)

Processor

  • Allwinner T527 processor
    – Octa-core ARM Cortex-A55, up to 1.8GHz
    – RISC-V CPU, up to 200 MHz
    – 600MHz HIFI4 Audio DSP
    – ARM G57 MC1 GPU
    – Up to 2 Tops NPU

Memory

  • 2GB/4GB LPDDR4
  • 16GB/32GB eMMC
  • 32Kbit EEPROM

Peripherals and Signals Routed to Pins

  • Power Management IC
  • 381-pin LGA Expansion Interfaces
    – 2 x RGMII/RMII
    – 1 x PCIe2.1, RC mode (reused with USB3.1)
    – 1 x USB 2.0 DRD
    – 1 x USB 2.0 Host
    – 1 x USB 3.1 DRD (reused with PCIe2.1)
    – 2 x SDIO 3.0
    – 10 x UART
    – 2 x CAN
    – 9 x I2C
    – 30 x PWM
    – 4 x SPI
    – 24 x GPADC, 12-bit
    – 2 x LRADC, 6-bit
    – 1 x Parallel CSI, 16-bit
    – 1 x HDMI 2.0
    – 1 x eDP
    – 2 x LVDS with dual link- 2 x RGB
    – 4+4-lane, 4+2+2-lane, or 2+2+2+2-lane MIPI-CSI
    – 2 x MIPI-DSI
    – 2 x DACs and 3 x ADCs
    – 3 x audio outputs
    – 3 x audio inputs
    – 4 x I2S/PCM
    – 1 x SPIF I/O
    – 2 x CIR RX and 1 x CIR TX
    – Up to 138 x GPIO

Note: the peripheral signals brought out to the expansion interface are listed in the maximum number. Some signals are reused. Please refer to the processor datasheet and SOM pin-out description file.
The MYD-LT527 Development Board Base Board

  • 1 x Power Jack
  • Serial ports
    – 2 x TTL serial ports (UART3/7 brought out from RPI expansion interface)
    – 2 x TTL serial ports (UART2/4/5/6 brought out from MI Fans PI expansion interface)
  • USB
    – 1 x USB3.0 Host
    – 2 x USB 2.0 OTG
  • 2 x 10/100/1000 Mbps Ethernet interface
  • 2 x CAN
  • 1 x Micro SD card slot
  • WiFi/Bluetooth Module (complies with IEEE 802.11 a/b/g/n/ac standard and supports Bluetooth V5.2)
  • Video Input: 2 x MIPI-CSI Interfaces (0.5mm pitch 24-pin FPC connector)
    Supports MYIR’s MY-CAM003M Camera Module
  • Video Output
    – 1 x HDMI Output Interface
    – 1 x Single-channel LVDS Display interface
    Supports MYIR’s MY-LVDS070C LCD Module with a Capacitive Touch Screen through the LCD interface
    – 1 x Mini-DP Display interface
    – 1 x Mini-DSI interface
  • Audio: 1 x 3.5mm Headphone/Mic Jack
  • 1 x 2.54mm 2 x 20-pin male expansion header (RPI interface)
    (RPI interface, GPIO/I2C/UART/SPI/CAN, compatible with Raspberry PI standard 40-pin extension interface)
    Supports MYIR’s MY-WIREDCOM RPI Module to extend RS485, RS232, and CAN functions
  • 1 x 2.54mm 2*20-pin male expansion header
    (MI Fans PI interface, GPIO/I2C/UART/SPI/USB/PWM)
  • 4 x Buttons (one for Reset, one for Wake up, one for FLASH and one for USER)
  • 1 x RTC Battery Interface

OS Support

  • Linux 5.15
  • Android 13
  • Ubuntu 22.04
More From: