An Introduction to Permittivity

An Introduction to Permittivity

$230.00

Permittivity is a significant quantity often used to quantify the behavior of a system under a given electric field distribution in space. The dielectric polarization and associated losses are two main effects connected through the complex permittivity via its real and imaginary parts. Therefore, the quantitative measure of permittivity is essential for predicting the response of a system, e.g., charge storage characteristics of capacitor, supercapacitor, flux through a charge carrying closed surface, exciton binding energy in soar cells/LEDs, properties of liquid crystals and LCDs, relaxation of dielectrics, microwave absorption effectiveness of shielding materials, the response of antenna systems, governing phase velocity of electromagnetic radiation through given medium, designing of metamaterials, etc.


Ships From: United States (US)
Supplier: Nova Science Publishers SKU: ISBN: 979-8-88697-042-5 Categories: , , , Tag: More From:

An Introduction to Permittivity

Permittivity is particularly relevant in energy storage, harvesting, conversion, transmission, dissipation, and even stealth technology; therefore, its thorough understanding is required, especially in practical applications. This edited book is the first to provide a single-source solution to address the fundamentals and applications of permittivity through a comprehensive literature review.

Table of Contents

Preface

Chapter 1. Permittivity and Its Significance for Devices and Applications
Parveen Saini
Conducting Polymers, Graphene Technology and Waste Management Group, Photovoltaic Metrology Section, Advanced Materials and Devices Metrology Division, CSIR-National Physical Laboratory, Dr. K. S. Krishnan Marg, New Delhi, India

Chapter 2. Advances in Dielectric Properties of Textile Materials
Srijan Das and Prabir K. Mukherjee
Government College of Engineering and Textile Technology, Serampore, Hooghly, India

Chapter 3. Permittivity Measurements of Ceramic Materials for Use in Microwave Furnaces
T. Santos1,2, S. Devesa3, V. A. F. Costa2 and L. C. Costa1
1I3N and Physics Department, University of Aveiro, Aveiro, Portugal
2 Center for Mechanical Technology and Automation, Department of Mechanical Engineering, University of Aveiro, Aveiro, Portugal
3CFisUC, Physics Department, University of Coimbra, Coimbra, Portugal

Chapter 4. Dielectric Permittivity and Models of Dielectric Relaxation
Georgios Giannoukos, Vasileios Chioktour and Athanasios Kakarountas
Department of Computer Science and Biomedical Informatics, University of Thessaly, Lamia, Greece

Chapter 5. Physical Characterization of the (Bi1-xCrx)NbO4 System
S. Devesa1,2,*, P. S. P. da Silva1, M. P. Graça2, L. C. Costa2 and J. A. Paixão1
1CFisUC, Department of Physics, University of Coimbra, Coimbra, Portugal
2I3N and Physics Department, University of Aveiro, Aveiro, Portugal

Chapter 6. Dielectric Behavior of Ferroelectric Liquid Crystals with Gold Nanoparticles, Water, and Ethanol for Innovative Electro-Optical Applications
Amit Choudhary1,* and Ashok M. Biradar2
1 Physics Department, Deshbandhu College, University of Delhi, Kalkaji, New Delhi, India
2CSIR – National Physical Laboratory, Dr. K. S. Krishnan Marg, New Delhi, India

Chapter 7. Role of Dielectric Permittivity in Electrode Materials for Energy Storage Device Applications: A Fundamental and Brief Overview
Md. Yasir Bhat 1, Neakanshika Chadha2 and Amrita Jain3
1Department of Chemistry, Khalifa University of Science and Technology, Abu Dhabi, UAE
2Kiet Group of Institutions, Delhi-NCR, Meerut Road, Ghaziabad, India
3 Institute of Fundamental Technological Research, Polish Academy of Sciences, Adolfa Pawińskiego, Warsaw, Poland

Chapter 8. Dielectrics in Electronic and Energy Storage Devices
Sonal Agrawal1, Kumar Gaurav1, Sushmita Dandeliya2, Boddepalli SanthiBhushan3, Parveen Saini4 and Anurag Srivastava1
1Advanced Materials Research Group, CNT Lab, ABV-Indian Institute of Information Technology and Management, Gwalior
²Department of Electronics and Communication Engineering, Indian Institute of Information Technology, Nagpur
3Department of Electronics and Communication Engineering, Indian Institute of Information Technology Allahabad, Prayagraj
4CSIR-National Physical Laboratory, Delhi

Chapter 9. Dielectric Properties and Electromagnetic Interference (EMI) Shielding Behavior of Conducting Polymer-Based Hybrids and Composites
Parveen Saini
Conducting Polymers, Graphene Technology and Waste Management Group, Photovoltaic Metrology Section, Advance Materials and Devices Metrology Division, CSIR-National Physical Laboratory, Dr. K. S. Krishnan Marg, New Delhi, India

Index

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

A leading global book and journal publisher specializing in academic books. As of 2018, we are also one of the top publishers in the political science field. We publish nearly 1600 books as well as 50 journals a year. Our books span a wide range of subjects, including but not limited to sports and sports management, political science and economics, education and psychology, women’s health issues, sexual and reproductive health, and aging and age-related diseases.

Shipping Policy

FAST DELIVERY! We ship worldwide via FedEx, UPS, DHL, and USPS because they’re Fast, Reliable, Affordable, and Easily Trackable. We process orders in 24 hours; delivery may take 4 to 7 days or sooner, depending on your location. Once shipped, you will receive an email with your tracking number.

Ships From: Not all our products are shipped from the USA; we ship some from regions like China, Taiwan, or Europe. Therefore, the tariff you will pay will differ depending on which country your order will be shipped from because not all countries charge the same amount. For example, if the US imposes a 30% tariff on goods from China, other countries may impose a much lower tariff. Check the "Ships From:" label on this product page to see from which country we will ship it.

TARIFF: Check the "Ships From:" label on this product page to see which country we will ship this product from. While not all products require a tariff, some may require a minimal or no tariff in your country. If applicable, the buyer will pay the tariff within their respective country. The total amount of your order does not include a tariff. Please enter a reachable phone number during checkout so the Shipping Company can contact you to pay the tariff once your parcel arrives at your destination.

Why don't we add tariffs to the product's retail price? If all countries imposed the same tariff amount and used the same currency, we would have added the tariff amount to the product price. However, we do not do that because each country charges a different amount and uses a different currency, while some do not even charge a tariff. Therefore, we can't add a tariff to the product's retail pricing. Oz Robotics' manufacturing partners, or suppliers are not responsible for tariffs. Please check the "Ships From:" label on the product page to see the product's origin. The total amount for your order does not include a tariff. The customer must pay the tariff. We will not cancel your order or refund you if you do not pay the tariff. More Details.

SHIPPING COSTS: For some industrial products, e.g., heavy wheels, CNC machines, etc., the shipping cost is calculated based on the product weight, not quantity. For lower shipping costs for orders with multiple items, please email us at sales@ozrobotics.com before you buy. We show shipping rates on the product page under the SHIPPING tab. To see the shipping cost for your country, click add to cart on the product page.

PRODUCT DATASHEET AND MANUAL: If applicable, the Product Documentation, such as the Datasheet, CAD Design, STP Files, Manuals, Reference Materials, and Tutorials, will be available for download upon purchase from the My Account as needed. On the checkout page, please create an account to download product-related files upon purchase. You won’t be able to download otherwise.

##################################

Return Policy

WITHIN 5 HOURS: Mistakes happen when ordering, so you have 5 hours to request an order cancellation, but we cannot refund the PayPal or Stripe Processing fee because they do not refund us.

WITHIN 24 HOURS: Your order has either been shipped, prepared to ship, or custom-made. If you still want to cancel your order after 5 Hours, we will deduct 30% of the total for restocking + PayPal or Stripe processing fees and the Return Shipping cost for unopened packages.

AFTER RECEIVING YOUR ORDER: If you decide not to keep your order after it arrives, we will deduct 80% of the total + the shipping fee if we find it refundable after a review. Please see our Refund and Replacement Policy

EXCHANGE POLICY: Oz Robotics wants you to be happy with your new purchase. However, we abide by the policy of our manufacturer partners because we do not manufacture these products; they do. Once you use the product, we cannot issue a refund. But we will offer an exchange for a wrongly purchased product with irreversible defects or technical problems. The customer will pay the shipping fee for a wrongly purchased product or similar issues. If the product you purchased is defective, email us at support@ozrobotics.com with photos or a video of the defective parts so we can evaluate it before you send it. More on Replacement Policy.

REFUND POLICY: Oz Robotics accepts refunds on a minimal basis unless there is a manufacturing defect. For electronic items, returns are only accepted on devices with serious and irreversible problems; meanwhile, the customer must apply for the returns within seven days of delivery. Before a refund acceptance, please include images or a video and any other proof of the defect. For more info please visit Refund Policy.

Once we agreed on a return, you can ship your defective item to the provided address, which you should receive from us first. Please ship the order in its original packaging with all the accessories and additional parts. If the Required Parts are not sent back, they will be billed for or expected to be shipped later. We will check the product for testing once all items have arrived. In your package, include a signed letter stating the reason for the product return, the original receipt, proof of defect, images, a video, etc. It will help us to speed up the process for you.

When returning the item, the customer is responsible for the shipping cost. However, we will assess the product, and if it is determined that there is a manufacturing defect and the product is not fixable, we will refund the shipping cost, repair, replace, or refund the full amount to the customer.

Do not return your product to our New York office. For any exchange or refunds, email us first at support@ozrobotics.com for us to provide you with the steps that need to be followed. Any product you return must be in the same condition you received and returned in the original packaging without being used. Please keep the original receipt.

Shipping costs

Region / Country State Postcode Cost
United States (US) Any Any $20.00
Everywhere else Any Any $30.00

Related Products