Bluetooth Low Energy BLE Module MDBT50-P512K

$6.98

Model No: MDBT50-P512K

  • Nordic nRF52833 SoC Solution
  • A recommended 3rd-party module by Nordic Semiconductor.
  • BT5.2 Bluetooth Specification Certified.
  • Supports BT5 Long Range Feature
  • Certifications: FCC, IC, CE, Telec (MIC), KC, SRRC, NCC, RCM, WPC
  • 32-bit ARM® Cortex™ M4 CPU
  • 512kB Flash Memory / 128kB RAM
  • RoHS & Reach Compliant.
  • Dimension:8.4 x 13.2 x 2.1 mm
  • 18 GPIO
  • PCB Antenna
  • Interfaces: SPI, UART, I2C, PWM, ADC, I2S, NFC and USB
  • Max temperature: +105 °C
  • A highly flexible multiprotocol SoC is ideally suited for Bluetooth® Low Energy, Zigbee, and Thread (802.15.4) ultra-low-power wireless applications.

Bluetooth Low Energy BLE Module MDBT50-P512K

Raytac’s MDBT50-512K and MDBT50-P512K are BT5.2 and BT5.1 stack (Bluetooth Low Energy or BLE) modules designed based on Nordic nRF52833SoC solution, which incorporates GPIO, SPI, UART, I2C, I2S, PMD, PWM, ADC, NFC, and USB interfaces for connecting peripherals and sensors.

Specifications

  • ARM Cortex –M4 32-bit processor with FPU, 64 MHz
  • Memory: 512KB flash / 128KB RAM
  • HW accelerated security: 128-bit AES/ECB/CCM/AAR co-processor(on-the-fly packet encryption)

Advanced On-chip Interfaces

  • USB 2.0 full speed(12Mbps)controller
  • High-speed 32MHz SPI
  • Type two near field communication (NFC-A) tag with wake-on field
  • Programmable peripheral interconnect(PPI)
  • 18general purpose I/O pins
  • EasyDMA automated data transfer between memory and peripherals
  • 12-bit, 200ksps ADC –8 configurable channels with programmable gain
  • 4 x 4 channel pulse width modulator (PWM) units with EasyDMA
  • Audio peripherals: I2S, digital microphone interface (PDM)
  • 5 X 32-bit timers with counter mode
  • Up to 4 x SPI masters / 3 x SPI slaves with EasyDMA
  • Up to 2 x I2C compatible 2-wire masters/slaves
  • 2 x UART(CTS/RTS) with EasyDMA
  • Quadrature decoder (QDEC)
  • 3 x 24-bit real-time counters (RTC)

Flexible Power Management

  • Supply voltage range 1.7V to 5.5V
  • On-chip DC/DC and LDO regulators with automated low-current modes
  • Automated peripheral power management
  • Fast wake-up using 64MHz internal oscillator
  • 0.6uA at 3V in System OFF mode, no RAM retention
  • 1.5uA at 3V in System ON mode, no RAM retention, wake on RTC
  • Nordic SoftDevice ready with support for concurrent multi-protocol
  • Operating temperature from -40 to 105°C
  • SPQ: 120/tray; Less than SPQ is workable (Polybag ship)
More From: