Handbook of Welding: Processes, Control and Simulation


This book provides a comprehensive overview of processes, metallurgy, quality assessment, testing, and numerical simulation in welded structures from conventional welding techniques to electron or laser beams.


Handbook of Welding: Processes, Control, and Simulation

This book provides a comprehensive overview of processes, metallurgy, quality assessment, testing, and numerical simulation in welded structures from conventional welding techniques to electron or laser beams.


Chapter 1. Welding Metallurgy of Stainless Steels
(P. Ferro and J.O. Nilsson – Department of Engineering and Management, University of Padova, Vicenza, Italy, et al.)

Chapter 2. A Processing Chart for Laser Beam Welding of AA6013-T6 Aerospace Aluminum Alloys
(R.H.M. Siqueira, S. M. Carvalho and M.S.F. Lima – IEAv-Insitute for Advanced Studies, Photonics Division, Sao Jose dos Campos, SP, Brazil, et al.)

Chapter 3. Electron Beam Welding: Current Trends and Future Scopes
(Anupam Kundu, Sanjib Jaypuria, D.K. Pratihar, Debalay Chakrabarti and Debasish Das – Research Scholar, IIT Kharagpur, India, et al.)

Chapter 4. Welding of Advanced High Strength Steels for Automotive Applications
(C.D. Marconi and H. G. Svoboda – DEYTEMA – Centre of Development and Technology of Materials, Department of Metallurgy Engineering, San Nicolás Regional Faculty, National Technology University, San Nicolás, Buenos Aires, Argentina, et al.)

Chapter 5. Weldability of Metal Foams Using Different Processes: A Review
(G. Costanza and M.E. Tata – Industrial Engineering Department, University of Rome “Tor Vergata,” Via del Politecnico, Rome, Italy)

Chapter 6. Friction Stir Processing and Welding Technologies
(Catarina Vidal, Daniel Braga, Pedro Moreira and Virgínia Infante – UNIDEMI, Department of Mechanical and Industrial Engineering, NOVA School of Science and Technology, NOVA University Lisbon, Caparica, Portugal, et al.)

Chapter 7. Friction Stir Welding of Aluminum Alloys: Similar and Dissimilar Materials
(H.G. Svoboda and L.N. Tufaro – FIUBA – Departmento de Ingeniería Mecánica, Facultad de Ingeniería, Universidad de Buenos Aires, Ciudad Autónoma de Buenos Aires, Argentina, et al.)

Chapter 8. Dissimilar Welding of Aluminum to Magnesium Alloys: Issues and Current Progress
(L.H. Ahmad Shah – Faculty of Mechanical and Automotive Engineering Technology, Universiti Malaysia Pahang, Pekan, Pahang, Malaysia)

Chapter 9. Hybrid Metal Extrusion and Bonding
(Øystein Grong, Lise Sandnes, Paolo Ferro, and Filippo Berto – Department of Mechanical and Industrial Engineering, Norwegian University of Science and Technology, Trondheim, Norway, et al.)

Chapter 10. Characterization of the Microstructure of Refill Friction Stir Spot Welded Aluminium Alloy Joints
(A. Kubit and T. Trzepiecinski – Department of Manufacturing and Production Engineering, Rzeszow University of Technology, Warszawy, Rzeszow,stir welding, Poland, et al.)

Chapter 11. Fundamentals of Thermo-Fluid-Mechanical Modelling in Welding Processes
(J. Winczek and A. Yadav – Czestochowa University of Technology, Czestochowa, Poland, et al.)

Chapter 12. Role of Numerical Simulations in Weld Analysis
(D. Das, S. Jaypuria, S. Gupta, A. Kundu, D.K. Pratihar and G.G. Roy – Department of Mechanical Engineering, IIT Kharagpur, India, et al.)

Chapter 13. Control of Residual Stress and Mitigation Approaches of Laser Welding-Computational Modeling and Experimental Validations
(Fanrong Kong and Radovan Kovacevic – ESAB Advanced Joining Center at SMU, ESAB Welding & Cutting Products, Dallas, TX, US, et al.)

Chapter 14. Computational Modelling of T-Joint Fillet Welding
(F.A.O. Fernandes and A.B. Pereira – TEMA-Centre for Mechanical Technology and Automation, Department of Mechanical Engineering, University of Aveiro, Campus de Santiago, Aveiro, Portugal)

Chapter 15. Recent Advances in Controlling, Monitoring, and Optimization of the Friction Stir Welding Process
(R. De Finis, F. Facchini, D. Palumbo, and L.M. Serio – Department of Mechanics, Mathematics and Management, Bari, Italy)

Chapter 16. Quality Assurance of Welded Construction of Industrial Boilers
(A.B. Pereira, J.C.F. Martinho and F.J.G. Silva – Centre for Mechanical Technology and Automation, Department of Mechanical Engineering, University of Aveiro, Aveiro, Portugal)

Chapter 17. Quality Assessment in the Manufacture of a Pressure Piping by Welding
(A.B. Pereira, J.C.F. Martinho and F.J.G. Silva – Centre for Mechanical Technology and Automation, Department of Mechanical Engineering, University of Aveiro, Aveiro, Portugal)



There are no reviews yet.

Be the first to review “Handbook of Welding: Processes, Control and Simulation”

Product Manuals

If applicable, the Product Documentation, Reference Materials, CAD design(s),.STEP file(s) and/or other drawing files, Manuals, and Tutorials will be available for download upon purchase. The order confirmation email will include a downloadable link to the product file(s), which can also be downloaded from the My Account section if needed.

A leading global book and journal publisher, specializing in academic and scholarly books. As of 2018, we are also one of the top publishers in the political science field. We publish nearly 1600 books as well as 50 journals a year. Our books span a wide range of subjects including but not limited to sports and sports management, political science and economics, issues in education and psychology, women’s health issues including sexual and reproductive health, and aging and age-related diseases.

Shipping Policy

WE SHIP WORLDWIDE: We primarily ship via FedEx, UPS, DHL, and USPS because they are fast, reliable, and easily trackable. We usually ship within two to three business days after the full payment is received. Standard delivery generally occurs within 5 to 7 business days after the shipping date. However, sometimes delivery may take about 7 to 10 business days, depending on the shipping destination, logistics mode, weather conditions, product weight, size, or shipping company distribution structures based on re-planning, such as staff shortages caused by COVID.

SHIPPING COSTS: For some industrial products, e.g., heavy wheels, CNC machines, etc., the shipping cost is calculated based on the product weight, not quantity. To benefit from lower shipping costs for orders with multiple items, please contact us at sales@ozrobotics.com. Our shipping rates are listed very clearly on each product page under the SHIPPING tab. Additionally, to see the shipping cost for your country, add the item to the Shopping Cart, there you will see the shipping cost based on your Country and Location.

DUTY TAX, CUSTOMS, IMPORT FEES and TARIFFS: While not all products require customs fee, but some industrial items may require a minimal tariff if applicable in your country and the total of your order exceeds $800 - The total amount for your order does not include a customs fee. A minimal tariff belongs to the buyer when applicable. Oz Robotics is not responsible for tariffs on any shipment. Please check the “By” section on each product page to see the country of the manufacturer or supplier for that product.

Exporting from the EU, importing into the EU – all you need to know: https://trade.ec.europa.eu/access-to-markets/en/home

Please read our Policies: https://ozrobotics.com/policies/
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Return Policy

ORDER CANCELLATION: After you placed an order, you have 5 hours to request an order cancellation. After 5 hours, your item(s) have either already been shipped, prepared to ship, or are currently being custom-made. It means we will not be able to process your cancellation request after this period has passed. By placing your order, you signify that you agree to be bound by our Order Cancellation Policy.

EXCHANGE POLICY: Oz Robotics wants you to be happy with your new purchase. However, we abide by the exchange policy of our suppliers because we do not manufacture these products; our suppliers do. Once you used the product, our supplier(s) and we have the right not to issue a refund. Still, we will offer an exchange for the wrongly purchased items or products with serious and irreversible defects or technical problem(s). For wrongly purchased products or any other similar issues, the buyer will pay the shipping fee. If the product you purchased is defective, please email us at support@ozrobotics.com with some photos or a video of the defective parts to evaluate before you send it. Click HERE for more on Refund and Replacement Policy

REFUND POLICY: Oz Robotics accepts refunds on a minimal basis unless there is a manufacturing defect. For any electronic items, returns are only accepted on devices with serious and irreversible problems; meanwhile, the customer must apply for the returns within seven days from the delivery date. Before a refund acceptance, please include images or a video and any other material proof of the defect. However, we abide by the exchange policy of our suppliers because we do not manufacture these products; our suppliers do. For more info on Refund and Replacement Policy please visit Refund and Replacement Policy.

Other than our supplier’s default policy, once a return is agreed upon, you can ship your defective item to the provided return address that you should receive from us first. Please ship the order in original packaging with all the accessories and additional parts. If the Required Parts are not sent back, they will be billed for or expected to be shipped at a later stage. And only once all items have arrived will our staff check the returned product for testing. Include in your package a signed letter stating the reason for your return and the original receipt as well as any mentioned proof of defect, images, or a video, etc. It will help us to speed up the process on your behalf.

The purchaser (customer/buyer) is responsible for all shipping costs when returning an item. However, upon receiving the returned order, we will assess the product. If it is determined that there is, in fact, a manufacturing defect, then we will refund the shipping costs as well as repair or replace or refund the full amount to the purchaser if the product is not fixable.

If you wish to return an unused product, please do so within seven days from the ship date for a refund on the purchase price, minus shipping, handling. Refunds will be credited to the original credit card use for payment in 24-48 HOURS after receiving the product back. We will charge 50% restocking fee.

Once your return is received and inspected, and if agreed for a refund, refunds will be credited to the original credit card used for payment in 24-48 hours. Please note that we will charge a 50% restocking fee once you return a product without any defect.

Once your refund is processed, then PayPal will return the money to the card that was used. It may take at least five business days (depending on the bank and credit company) before your refund is posted in your bank account and statements. Contact Us if you still have not received your refund after 5 business days.

Do not return your product to our New York office. For any exchange or refunds, please email us first at support@ozrobotics.com for us to provide you with the steps that need to be followed. Any product you return must be in the same condition you received and returned in the original packaging without being used. Please keep the original receipt. More on Refund and Replacement Policy.

Shipping costs

Shipping from United States (US)
Within United States (US) $15.00
Outside United States (US) $20.00

If you have any questions with regards to this product, please ask us here. This will include the product link automatically.

There are no questions yet. Be the first to ask a question about this product.

Send me a notification for each new answer.

Financing Available

With PayPal Credit, you can enjoy special financing offers with No Payments and No Interest if paid in full six months on $99 or more purchases. Visit PayPal for more details: https://www.paypal.com/webapps/mpp/paypal-credit.

Make Money!

Start Selling – Suppliers and Manufacturers, let us help you sell your products on OzRobotics.com – Details

Freelancers – Generate Revenue by Offering Your Freelance Skills on OzRobotics.com – Details

Affiliates – You’re already sharing so many things online without making any money; why not share our products and make money when your visitors buy – Join Now