MARC 10- FAP 10 Slick Capacitive Fingerprint Scanner

$55.99

MARC10 is a secure and reliable fingerprint scanner for precise identification, verification and authentication process. MARC10 captures high-resolution fingerprint images with the most rugged and advanced Capacitive sensor. The device supports MINEX compliance embedded extractor.

MARC 10- FAP 10 Slick Capacitive Fingerprint Scanner

MARC10 is a secure and reliable fingerprint scanner for precise identification, verification, and authentication. MARC10 captures high-resolution fingerprint images with the most rugged and advanced Capacitive sensor. The device supports MINEX compliance embedded extractor.


Sensor

Parameters

Specification

Fingerprint Sensor FAP10 Capacitive Sensor
Pixel Resolution 500 DPI +/-2%
Platen Area 12.8 mm x 18 mm
Image Size 256 x 360 Pixels
Image Grayscale 256 (8 – Bit Gray Level)
Maximum Acquisition Time (Placement to Template) < 2 sec
35mm X 23mm X 5mm

 

<0.1% & <0.001%

 

Module Approx. Dimension (L x W x H) 35mm X 23mm X 5mm
Approx Dimensions (L x W x H) 58 x 33 x 11 mm
Approx Weight 0.040 Kg
Capture mode Auto Finger detection functionality & Auto capture with built-in quality check

(Incorporates NIST quality considerations)

Latent Finger Detection Supported
MTBF  50000 Hours
Wear & Tear cycle of the sensor 1 Million
Cross Cut 5B
Surface Hardness 7H
SALT Spray Test  IEC 60068-2-11/IS 9844/ASTM G 85

Interface

Parameters

Specification

Protocol  USB2.0, SPI (Up to 24 Mbps)*, UART (Baud Rate- Default 9600, Up to 115200)*
Connector  Product: USB Type-A Male, Module: Wire to Board **

Electrical Characteristics

Parameters

Specification

Operating Voltage 5V +/- 5% (USB or UART Powered Device), +3.3V±3% (Only for SPI Powered Device)
Current Consumptions Operating Current: < 50 mA & Standby Current : < 30 mA

Environmental Characteristics

Parameters

Specification

Operating Temperature  -10°C to +70°C
Storage Temperature  -20°C to +85°C
Humidity (Operating / Storage) < 90% RH, Non-condensing

Compliant With Following Standard

Parameters

Specification

Biometric Data Interchange Format  ISO 19794-2: 2005 & 2011 and ANSI 378

ISO 19794-4: 2005 & 2011, WSQ3.1

Environmental, Health, and Safety RoHS Certification
ESD protection Contact Discharge: +/- 8kV, Air Discharge: +/- 15kV
Safety EN/IEC 62368-1, IS 13252 (Part 1)
EMI / EMC Compliance CE & FCC Part 15B class A
*Image Quality Certification  FBI PIV Certification, Mobile-ID FAP10
IP Rating IP54 (Device Level), IP67 (Platen Area)
Device Driver WHQL Certified

System Requirements

Parameters

Specification

Operating System  Windows 7, 10 & 11, Android & Linux
Standard Software/SDK  1:1 Matching: MORFIN_AUTH,

: 1:N Matching: MORFIN _SEARCH

  • * UART & SPI interface is available in the sensor module only.
  • *FPC Connector available for USB, UART & SPI interface.
  • The PDF brochure will be emailed to you upon purchase.

Additional information

Weight 0.220 lbs
Dimensions 2.29 × 1.30 × 0.44 in

Reviews

There are no reviews yet.

Be the first to review “MARC 10- FAP 10 Slick Capacitive Fingerprint Scanner”

Product Manuals

If applicable, the Product Documentation, Brochure, Reference Materials, CAD design(s),.STEP file(s) and other drawing files, Manuals, and Tutorials will be available for download upon purchase. In addition, the order confirmation email will include a downloadable link to the product file(s), which can also be downloaded from the My Account section if needed.


Our Seller product portfolio includes the following:
· Enrolment: Tenprint (4-4-2) fingerprint scanner, Dual Iris scanner, Enrollment kit, Enrollment kiosk, and Enrollment terminals
· Verification: Single fingerprint scanners, single iris scanners, verification terminals, and many more
. Time and Attendance
. Self Enrollment Biometric KIOSK used in Airports

Shipping Policy

After your purchase, to receive your tracking number and download product-related files, please check your SPAM folder to ensure you accept emails from OzRobotics.com

WE SHIP WORLDWIDE: We primarily ship via FedEx, UPS, DHL, EMS, TNT, and USPS because they are fast, reliable, and trackable. We usually ship within two to three business days after the full payment. Standard delivery generally occurs within 5 to 7 business days after the shipping date. However, the delivery may take about 7 to 10 business days, depending on the shipping destination, logistics, weather conditions, product weight, size, or shipping company distribution structures.

SHIPPING COSTS: For some industrial products, e.g., heavy wheels, CNC machines, etc., the shipping cost is calculated based on the product weight, not quantity. To benefit from lower shipping costs for orders with multiple items, please contact us at sales@ozrobotics.com. Our shipping rates are listed clearly on each product page under the SHIPPING tab. Additionally, to see the shipping cost for your country, add the item to the Shopping Cart; you will see the shipping cost based on your Country and Location.

CUSTOMS and TARIFFS: While not all products require a tariff, some products may require a minimal tariff if applicable in your country for orders of $800.00 and above. The total amount for your order does not include a customs fee/tariff. A tariff belongs to the buyer when applicable. Why don't we add tariffs to the product's retail price? - If all countries deducted the same tariff amount, we would have added the tariff amount to the product price. However, we do not do that because each country charges a different amount, while some do not even charge. Therefore we can't add any tariff to the product's retail pricing. Oz Robotics, Manufacturing Partner, or Supplier are not responsible for tariffs. Please check the "Made In:" and "Brand:" labels on the product page to see the product's origin. The total amount for your order does not include any duties, import taxes, customs fees, and GST/VAT. The buyer must pay all import duties. If you choose not to pay the tariff and parcel returns, there will not be any refund. Please click here to see more on Tariffs.

Return Policy

5 HOURS: Mistakes happen when ordering, so you have 5 hours to request an order cancellation, but we cannot refund the PayPal or Stripe Processing Fees because they do not refund us. Unfortunately, after 5 hours, your item(s) have either been shipped, prepared to ship, or are currently custom-made. Therefore, we will not process your cancellation request after this period has passed..

AFTER 5 HOURS: If you want to cancel your order after 5 Hours, we will deduct 30% of the total for restocking + PayPal or Stripe processing fees and the Return Shipping cost for unopened packages.

AFTER RECEIVING YOUR ORDER: If you decide not to keep your item(s) after they arrive, please see our Refund and Replacement Policy

EXCHANGE POLICY: Oz Robotics wants you to be happy with your new purchase. However, we abide by the exchange policy of our suppliers because we do not manufacture these products; our suppliers do. Once you use the product, our supplier(s) and we have the right not to issue a refund. Still, we will offer an exchange for wrongly purchased items or products with serious and irreversible defects or technical problem(s). The buyer will pay the shipping fee for wrongly purchased products or similar issues. If the product you purchased is defective, please email us at support@ozrobotics.com with photos or a video of the defective parts to evaluate before you send it. Click HERE for more on Refund and Replacement Policy

REFUND POLICY: Oz Robotics accepts refunds on a minimal basis unless there is a manufacturing defect. For electronic items, returns are only accepted on devices with serious and irreversible problems; meanwhile, the customer must apply for the returns within seven days of delivery. Before a refund acceptance, please include images or a video and any other proof of the defect. However, we abide by the exchange policy of our suppliers because we do not manufacture these products. For more info please visit Refund and Replacement Policy.

Other than our supplier's default policy, once a return is agreed upon, you can ship your defective item to the provided return address that you should receive from us first. Please ship the order in original packaging with all the accessories and additional parts. If the Required Parts are not sent back, they will be billed for or expected to be shipped later. And only once all items have arrived will our staff check the returned product for testing. Include in your package a signed letter stating the reason for your return, the original receipt, proof of defect, images, a video, etc. It will help us to speed up the process on your behalf.

The purchaser (customer/buyer) is responsible for all shipping costs when returning an item. However, upon receiving the returned order, we will assess the product. If it is determined that there is, in fact, a manufacturing defect, then we will refund the shipping costs as well as repair or replace or refund the full amount to the purchaser if the product is not fixable.

If you wish to return an unused product, please do so within seven days from the ship date for a refund on the purchase price minus shipping and handling. Refunds will be credited to the original credit card used for payment 24-48 HOURS after receiving the product back. We will charge a 30% of the total for restocking + PayPal or Stripe processing fees and the Return Shipping cost for unopened packages.

Once your return is received and inspected, and if you agree to a refund, refunds will be credited to the original credit card used for payment in 24-48 hours. Please note that we will charge a 50% restocking fee once you return a product without any defect.

Once your refund is processed, PayPal will return the money to the card used. It may take at least five business days (depending on the bank and credit company) before your refund is posted in your bank account and statements. Contact Us if you have not received your refund after five business days.

Do not return your product to our New York office. For any exchange or refunds, please email us first at support@ozrobotics.com for us to provide you with the steps that need to be followed. Any product you return must be in the same condition you received and returned in the original packaging without being used. Please keep the original receipt. More on Refund and Replacement Policy.

Shipping costs

Shipping from India
Within India Free
Outside India Free

National Shipping Details

Minimum shipping charge per order $50.00
Maximum shipping charge per order $70.00
Free shipping if the order spend is over $100.00

International Shipping Details

Minimum shipping charge per order $50.00
Maximum shipping charge per order $70.00
Free shipping if the order spend is over $100.00

Sell with Oz Robotics

Sell your products here on OzRobotics.com – Collaboration has been the foundation of ongoing success for our partners selling their products through Oz Robotics to Businesses, Schools, and Enthusiasts.

  • Become A Vendor:  Sell your Hardware, Software, and Tech Books. See Details
  • Become A Freelancer:  Offer IT Services, Engineering, Programming, Design, and other skills. See Details
  • Become An Affiliate: Share our products online and make money when visitors buy. See Details