Model 800RC Remote Controlled Drapery Motor
Automate the opening and closing of your window coverings using the provided RF remote control or add your own lamp timer, X10, or INSTEON plug-in module for integration into your home automation system. The Add-A-Motor Remote Controlled Drapery and Vertical Blind Motor attach to the loop end of your window covering cord or chain without modification. Motor adjustment dials permit you to set automatic stop positions: open, closed, any in-between. This product is not approved for lifting and lowering shades or for decorative drapery tracks.
Traversing Drapery and Vertical Blinds:
- Attach the motor to the existing cord loop.
- If your track has “roller-carriers,” the motor can traverse 10-feet one-way or 15-feet center open.
- If your track has “sliding carriers,” the motor can traverse 8-feet one-way or 12-feet center open.
- Motor adjustment dials permit you to set automatic stop positions: open, closed, any in-between.
- Maximum fabric weight 35 pounds.
Rotating Vertical Blinds:
- Attach the motor to the existing chain loop.
- Chain connector can pass through motor without damage.
- Motor adjustment dials permit you to set two automatic stop positions: open, closed, in-between.
- If your chain does not have an existing loop, please call us, explaining a simple option.
Traversing AND Rotating the same Vertical Blinds:
- To traverse and rotate the same vertical blind requires two (2) Model 80 motors.
- Please note that a standard wall outlet has polarized plug receptacles and cannot accept two motors.
- Replace it with a UL Listed replacement outlet that can accept both motors.
- An alternate solution is to use your own extension cord and plug both motors into the cord outlets.
Reviews
There are no reviews yet.