Tough Resin Liquid 405nm Photo UV C Resin for SLA/LCD 3D Printer
R1 High toughness resin suitable for high toughness requirements.
Feature: High toughness
Net Weight: 1.1 lb (0.5 kg)
Gross Weight: 1.5 lb (0.66 kg)
Specific Gravity(g/cm3): 1.03-1.11
Tensile Strength at Break(MPa): 28-37
Elongation at Failure(%): 40-50
Glass Transition (Tg,ºC): 65
Shore Hardness: 76D
LCD tough human model photosensitive resin R1 is a solvent-free, high viscosity, high precision photocurable 3D printing resin. Suitable for laser and LED light source. It can be molded in a few seconds under the irradiation of 385nm and 405nm light source. The photosensitive resin mixture formula is optimized and can effectively suppress the beam penetration and avoid deep curing. The minimum layer thickness of single exposure can be controlled at 0.025. Mm.
It could achieve high molding precision; low shrinkage rate,fast curing speed with low odor and low irritancy. With low exposure,the resin can be quickly cured with smooth and delicate appearance. The resin is with high strength and .toughness.