SchmartBoard OpAmp
The Schmartboard OpAmp Board makes it very easy to assemble, and experiment with, op-amp circuits. It uses an OPA172 operational amplifier whose main features make it very suitable for experimenting.
These features are:
- Wide Supply Range: +4.5 V to +36 V, ±2.25 V to ±18 V
- Low Offset Voltage: ±0.2 mV
- Gain Bandwidth: 10 MHz
- Input Range Includes the Negative Supply
- Input Range Operates to Positive Supply
- Rail-to-Rail Output
- Low Noise: 7 nV/√Hz
- High Common-Mode Rejection: 120 dB
- Low Input Bias Current: ±8 pA
- Low Quiescent Current: 1.6mA per Amplifier
- Comes bundled with some components for your convenience(see Bill of Materials)
The OPAMP Board can be operated with single or dual power supplies and the 10MHz bandwidth makes is sufficient for most experimenter’s circuits.
Only logged in customers who have purchased this product may leave a review.
Our Mantra at Schmartboard is “Electronics for Everyone.” When we say this, we mean it. We don’t mean as long as you are using through-hole components or if you have hands as steady as a surgeon. We don’t mean you can do it unless you use a QFN device. We mean that if you have at least reasonable motor skills, you can work with any pitch component,
Forget those complicated hand soldering techniques and special surface mount soldering tools. With SchmartBoard, hand soldering surface mount components are more straightforward than hand soldering through-hole. So instead of denying yourself the most current chip technology or paying a fortune for prototyping, you can now use today’s most advanced chip technologies in your circuits. SchmartBoard|ez makes hand soldering SMT parts fast, easy and flawless.
This opens a new world for many engineers, hobbyists, and students. For example, we can teach a 10-year-old who has never held a soldering iron to hand solder a .4mm Pitch chip…flawlessly, in 1 minute.
Reviews
There are no reviews yet.